Access Official Technical PDF

Share Summary:LinkedInEmail

Radiation detection technologies depend on more than the detector material alone. Sensor choice, signal processing, power, data acquisition and application requirements all shape the design of a complete measurement or imaging system. The 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS-MIC) exhibition guide illustrates this breadth, bringing together suppliers of scintillators, semiconductor detectors, photodetectors, readout electronics, instruments and software.

Held at Manchester Central Convention Complex from October 29 to 31, the exhibition accompanied the IEEE NSS and MIC and the 26th International Symposium on Room-Temperature X-Ray and Gamma-Ray Detectors. Its exhibitor presentations included topics such as integrated circuits for radiation detection and imaging, silicon drift detectors, silicon photomultiplier readout, photomultipliers, FPGA-configurable data acquisition and 3D integrated-circuit technology.

Radiation detection technologies span materials and system design

The guide highlights a broad range of detector materials and device types. These include cadmium telluride (CdTe), cadmium zinc telluride (CZT), silicon and diamond semiconductor detectors, as well as inorganic and organic scintillators. Each technology appears in different forms, from individual crystals and detector modules to arrays and finished instruments.

Several exhibitors described scintillation materials used in gamma-ray, X-ray, neutron and imaging applications. Listed materials included sodium iodide, cesium iodide, bismuth germanate, lutetium-based crystals, strontium iodide and cerium bromide. Organic scintillator offerings included plastic and liquid materials, with some products aimed at neutron detection. The range underscores why specifying a detector requires attention to the measurement task, rather than treating all scintillators or semiconductor sensors as interchangeable.

Semiconductor detector suppliers, meanwhile, covered devices such as silicon drift detectors (SDDs), CdTe and CZT sensors, and silicon or diamond detectors. The guide notes SDD offerings for applications including benchtop instrumentation and synchrotron spectroscopy, as well as sensors designed for higher-energy measurements. Other entries describe detector readouts for multiple sensor types, including silicon, CZT, CdTe, thallium bromide and photodetectors.

From sensor output to usable measurement data

A detector is only one part of a measurement chain. The exhibition listings also feature preamplifiers, amplifiers, multichannel analyzers (MCAs), pulse processors, waveform digitizers, analog-to-digital converters, timing electronics and high- and low-voltage power supplies. Together, these components condition detector signals, capture pulse information and support analysis.

Digital pulse processing and data acquisition featured prominently in the conference presentation schedule. One session addressed integrated circuits and systems for radiation detection and imaging, while other presentations covered SiPM readout, SiPM arrays, silicon drift detectors and configurable FPGA-based DAQ systems. For engineers developing or integrating an instrument, this mix points to practical design questions: what signals must be captured, how should channels be read out, and what processing is required to turn detector events into useful spectra or images?

Some exhibitors described application-specific integrated circuits (ASICs) for detector readout. Depending on the device and application, these circuits can support functions such as amplification, triggering and digital output. Other listings covered compact digital spectrometers and pulse-height analyzers, including systems that combine detector electronics and processing in small enclosures. The appropriate architecture depends on the detector, the required measurement and the wider system design.

Imaging and identification applications

The exhibition also represented systems that convert radiation measurements into images or identification results. Examples included X-ray imaging based on photon-counting technology, gamma-ray imaging spectrometers, compact gamma cameras, radiation monitoring systems and radioisotope identification devices (RIIDs). Listed application areas ranged from nuclear medicine and research to industrial scanning, environmental monitoring, security and nuclear facilities.

Imaging systems may combine a detector with specialized readout electronics, data acquisition and software. The guide describes products and development work involving silicon photomultipliers (SiPMs), photomultiplier tubes, scintillator arrays and FPGA-based acquisition. It also identifies software for spectrum analysis and isotope identification. These examples show how system-level capabilities are assembled from interacting hardware and software, rather than determined by the sensor in isolation.

For industrial and technical teams evaluating a solution, the guide suggests useful areas for discussion with suppliers:

  • Detection task: clarify whether the requirement is spectroscopy, imaging, monitoring, identification or another measurement function.
  • Detector and material: compare the sensor types and scintillation materials relevant to the application.
  • Readout and acquisition: establish how signals are conditioned, digitized and transferred for analysis.
  • Integration needs: determine whether the project calls for a component, detector module, instrument or customized system.
  • Operating context: discuss the intended environment and application with the supplier, particularly where system configuration is application-specific.

A systems view of radiation measurement

The 2019 NSS-MIC exhibition presented radiation detection as an ecosystem: materials and sensors at the front end, electronics and data acquisition in the middle, and instruments, software and application systems at the other end. This perspective is relevant to automation engineers, system integrators and technical decision-makers planning radiation measurement or imaging projects. A sound evaluation considers the complete signal path and the intended use, not just a detector’s headline characteristics.

The practical takeaway is to define the measurement requirement first and then assess how the detector, readout, power, acquisition and analysis components fit together. The exhibition guide’s range of technologies and presentation topics provides a snapshot of the engineering choices involved in building radiation detection systems for research, medical, security and industrial settings.

Access Official Technical PDF

About The Author