Real-time simulation gives industrial power and automation teams a way to study dynamic electrical systems while connecting models to physical control hardware. For power electronics development, this makes it possible to examine microgrid operation, refine control strategies and test real controllers under simulated conditions before moving to system-level hardware testing.
The approach is especially relevant when a system combines renewable generation, power converters, rotating machines and changing loads. The simulation must represent the system’s dynamics at a suitable time step, while the selected test method determines whether engineers are evaluating a model, a controller or physical power equipment.
Where real-time simulation fits in development
Power systems contain processes that operate across different time scales. Turbine and generator behavior, converter switching, current regulation, DC-link control and grid synchronization do not all require the same modeling detail or update rate. Real-time simulation platforms can support these studies, but the time step and model complexity must be matched to the application.
In the described simulator setup, CPU-based platforms support real-time system models, while an FPGA can be used for faster calculations in controller hardware-in-the-loop work. The material describes pure real-time simulation of systems up to 4,000 nodes at a 50-microsecond time step, and FPGA-based controller HIL down to a 200-nanosecond time step. These are platform-specific examples, not universal requirements for every project.
A fixed time step and finite computational capacity create trade-offs. Larger or more detailed models may require more processing resources or a different simulation approach. Fixed-step calculations can also limit accuracy, and nonlinear events can create stability challenges. At the same time, the ability to connect simulation models with external hardware is a central advantage for development and testing.
Microgrid control development with real-time simulation
A hydro-wind-solar microgrid provides a useful example of the questions engineers can investigate. In the system described, a hydro turbine and generator operate alongside wind and photovoltaic resources, converters, and loads. The controls must coordinate voltage and frequency regulation with renewable generation and changing demand.
Two operating strategies are considered. In master-slave cooperative control, the hydro turbine regulates voltage and frequency, while the photovoltaic and wind systems operate in maximum power point tracking (MPPT) mode. In full droop control, the hydro turbine remains central to voltage and frequency regulation, while the renewable sources use droop power control.
Real-time models allow engineers to examine steady operation and changing conditions, including load steps and variations in wind and solar input. They can observe quantities such as point-of-common-coupling voltage, source currents, and DC-side voltage and current. This helps make control interactions and system responses visible within the modeled scenario.
Representing turbine and converter dynamics
The hydro turbine subsystem includes turbine and conduit dynamics, a servomotor, generator dynamics, and an electronic load controller. Its control design considers PID regulation, transient response, bandwidth, and relative stability. Root-locus and transient analyses can help assess how selected design parameters affect stability and response characteristics.
Wind and PV subsystems introduce their own control requirements. The wind turbine model includes power and speed-related behavior, while the PV system includes an inverter control structure. Converter functions described in the material include phase-locked loop (PLL) synchronization, current regulation, and DC-bus voltage control. Modeling these elements together helps engineers study coordination across the microgrid rather than treating each controller in isolation.
Moving from simulation to controller HIL
Controller hardware-in-the-loop (CHIL) testing connects a real controller to a simulated plant. The simulated system supplies measurements to the controller, and the controller returns signals such as switching commands. This lets engineers assess the behavior of actual control hardware without requiring the entire power system to be physically assembled.
In the PV integration example, a digital signal processor (DSP) controller runs grid-tied inverter functions, including PLL, current regulation, and DC/AC voltage regulation. An FPGA controller handles converter control tasks such as PI algorithms, pulse-width modulation, and phase-shift insertion. The DSP and FPGA are synchronized to support coordinated operation. Measurement, sampling, signal delays, and PWM interfaces are part of the test arrangement and need to be represented in the setup.
CHIL is suited to verifying controller implementation and its interaction with the simulated system. It can support rapid control prototyping as well as testing of a real controller, while keeping the modeled electrical components separate from the physical control hardware.
Power HIL extends testing to electrical hardware
Power hardware-in-the-loop (PHIL) testing adds physical power equipment to the simulation loop. Rather than checking only a controller against a modeled plant, engineers can use the setup to investigate system and hardware behavior. The material describes a PHIL capability of up to 45 kW, along with an arrangement involving inverters, a load bank, a rectifier, a power supply, switching equipment, and protective devices.
Because PHIL involves power exchange between the simulator and physical equipment, the interface and test configuration matter. The intended test should guide the choice of simulated components, measurement points, protection, and power hardware. CHIL and PHIL therefore address related but distinct questions: CHIL focuses on the controller, while PHIL brings system hardware into the evaluation.
Choosing the right test method
Development teams can use the methods in sequence, depending on project needs:
- Pure real-time or faster-than-real-time simulation: study system behavior, run deterministic or statistical analyses, and develop controls.
- Controller HIL: verify a real controller against a simulated system.
- Power HIL: evaluate interactions involving physical power hardware and the simulated system.
The method should match the question being asked, the model’s required detail, the available computing platform, and the hardware to be tested. A suitable setup helps teams investigate operating modes and dynamic responses before proceeding to more hardware-intensive stages.
Practical implications
Real-time simulation supports a structured path from power-system modeling to controller and hardware testing. For microgrid and power electronics teams, its value lies in connecting system-level behavior with control design and, when needed, physical equipment. Careful attention to time step, model complexity, nonlinear behavior, interfaces, and test objectives helps ensure that each stage answers a useful engineering question.