GNSS interference is more than a receiver-level concern: it can affect the position, navigation and timing (PNT) functions that connected and automated systems rely on. For industrial automation engineers, system integrators and operations leaders, the central lesson is to treat satellite navigation as a valuable input—not an infallible one—and to consider how systems behave when that input is degraded or unavailable.
GPS and other global navigation satellite systems provide positioning and precise timing across many applications. But the satellite signals received on Earth are weak, and interference can come from adjacent-band transmissions, deliberate jamming or spoofing. As automation expands, resilience depends on recognizing these limits and planning for alternative or complementary sources of information.
Why GNSS interference deserves attention
Adjacent-band interference can arise when powerful terrestrial transmitters operate near frequencies used by satellite navigation. The concern is that a nearby high-power signal may degrade GNSS receiver performance even if it is not transmitting on the navigation frequency itself. The effect depends on factors including transmitter power and spacing, receiver characteristics and the signals being tracked.
Testing discussed in the source material found that high-performance receivers could begin to degrade within a few kilometres of a 10-watt transmitter. Protecting a broad area therefore depends not only on limiting individual transmitter power, but also on understanding deployment density and the cumulative environment. A proposal that leaves tower spacing or transmitter geometry unspecified is difficult to assess fully.
Receiver classes can respond differently. High-precision equipment and general aviation receivers, for example, do not necessarily have the same degradation thresholds. This matters for system designers: an assessment based on one receiver type or use case may not represent the risks to other applications in the same region.
Jamming, spoofing and interference are different risks
Jamming can deny service
Jamming raises the noise or interference level enough to prevent a receiver from acquiring or maintaining useful satellite signals. It may be deliberate or accidental. The result can be loss of position or timing, or a degraded solution that forces an application to fall back to other methods.
In aviation, reported GPS disruptions have affected navigation and aircraft systems that rely on location information. Crews may need to use backup procedures, and an approach may have to be discontinued. These reports illustrate a broader operational point: GNSS disruption can have effects beyond the receiver, particularly when multiple systems use the same position input.
Spoofing can mislead a receiver
Spoofing attempts to make a receiver accept false navigation signals. A capable receiver may detect conflicting signals or identify that it cannot produce a trustworthy solution; the response depends on its design and the circumstances. Jamming, by contrast, can simply remove the signal availability that the receiver needs. Both threats warrant attention, but they require distinct detection and mitigation strategies.
Build resilience into PNT-dependent systems
Resilient PNT is not synonymous with making a GNSS receiver more accurate. It means maintaining dependable system behavior when satellite signals are disrupted, degraded or suspect. A practical approach considers protection, receiver robustness and augmentation with other sources.
- Assess exposure: Identify which processes, control functions and safety procedures depend on GNSS position or time, and consider the consequences of losing that input.
- Use complementary sensors: Inertial measurement units and other sensors can support navigation when GNSS is unavailable, although inertial error can grow over time and performance may be affected when a vehicle is stationary or moving slowly.
- Consider antenna and receiver design: Directional or phased-array antennas can help resist some jamming conditions. Modern receiver designs may also improve robustness, but costs, retrofit requirements and effects on high-accuracy performance need evaluation.
- Plan for independent backup: eLoran has been described as a possible regional backup. It does not match GNSS in three-dimensional capability or accuracy, but its stronger signals may make it less vulnerable to jamming.
- Coordinate operations: In environments such as aviation, communication between organizations conducting jamming exercises and operational authorities can help limit avoidable disruption.
Multi-GNSS reception can add useful redundancy by allowing a receiver to use signals from more than one constellation. Augmentation systems can contribute integrity monitoring: they help users identify satellites or signals that should not be trusted. More constellations are not a substitute for integrity assessment, however, and the combined signal environment still needs to be considered.
Automation raises the stakes
Autonomous and remotely operated systems depend on more than a position fix. They may combine timing, navigation, communication, radar, visual sensing and other data to understand their surroundings and carry out a mission. Integrating these sources can improve continuity and support safer decisions, but it also requires systems to recognize disagreement between inputs rather than blindly accepting one source.
The same principle applies in industrial settings. Where GNSS supports mobile equipment, surveying, logistics or time synchronization, engineers should define what happens when the signal is lost or inconsistent. That may mean switching to a backup, alerting an operator, limiting a function or declaring that a reliable solution is unavailable. The appropriate response depends on the application and its risk assessment.
Conclusion: design for continuity, not just accuracy
GNSS remains a foundational technology, but dependence on satellite signals alone can create operational vulnerability. Adjacent-band interference, jamming and spoofing can affect receivers and the systems that rely on their outputs. Industrial and technical decision-makers should map PNT dependencies, assess receiver-specific risks and plan for complementary sensors, integrity monitoring and backup methods. Designing for continuity and trustworthy data—not accuracy alone—helps automation systems respond more predictably when GNSS conditions change.