Access Official Technical PDF

Share Summary:LinkedInEmail

RISC-V FPGA development brings together an open instruction set architecture and reconfigurable hardware. For industrial automation engineers and system integrators, that combination offers a way to examine processor designs, test custom hardware changes, and explore platform requirements before committing to a fixed silicon implementation. Understanding what RISC-V does—and what it does not provide—is essential to evaluating its practical role in embedded and control systems.

What an instruction set architecture defines

An instruction set architecture (ISA) is the interface between software and a processor. It defines the instructions a processor can execute and how those instructions are represented in machine code. A compiler translates high-level code, such as C, into assembly language; an assembler then converts that assembly into machine code the processor can execute.

The ISA is not the processor itself. It is a standard that software and hardware implementations can share. That standard can support an ecosystem of compilers, assemblers, debuggers, emulators, simulators, documentation, and operating systems. Without a common target, software can be difficult to port between processor designs.

Why RISC-V matters for hardware development

RISC-V was developed at the University of California, Berkeley, after researchers found that existing ISA options could bring licensing constraints, complexity, or close ties to particular hardware designs. The project began as a research effort to create a clean, simple instruction set. Its name refers to the fifth major Berkeley RISC ISA.

The design aims to keep the base architecture straightforward while allowing extensions and custom implementations. A frozen base user specification was released in 2014, and the RISC-V Foundation was established to maintain the ISA as a free and open standard.

For engineers, the distinction between an open ISA and an open processor is important. RISC-V specifies the software-visible instruction set, but it does not dictate that every implementation must be open source. A company can use the standard in an open, closed, or mixed hardware design. Nor does the ISA alone supply a chip, platform specification, compiler, operating system, drivers, or application software. Those are separate parts of a complete development environment.

How FPGAs support RISC-V experimentation

Open processor designs make it possible to inspect and change hardware, but fabricating a new chip is not a rapid way to explore an idea. An FPGA, or field-programmable gate array, provides a different path: its hardware logic can be reconfigured so the device behaves like a changed or replacement design. This makes FPGAs useful for trying processor and platform variations without first producing a new application-specific chip.

In a RISC-V FPGA project, potential areas of change include:

  • CPU configuration: Explore choices such as a 32-bit or 64-bit design, cache sizes, branch prediction, and pipeline depth.
  • Processor behavior: Modify implementation details and examine their effects, including whether a performance-oriented change could introduce a security concern such as a side-channel risk.
  • ISA extensions: Customize the instruction set for a particular design objective.
  • CPU implementation: Select an existing core or develop a different one while retaining the RISC-V ISA as the software-facing standard.
  • Platform hardware: Adapt the surrounding system, for example by adding hardware intended to drive many NeoPixels or an accelerator for deep learning.

These options separate two decisions that are often easy to conflate: which ISA software targets, and which hardware implementation executes it. That separation can help teams investigate a design requirement without treating one processor implementation as the only possible choice.

From processor core to working platform

A processor core is only one element of an embedded system. Demonstrations described in the RISC-V ecosystem have combined open cores with development boards, operating systems, and applications. Examples include running the Zephyr OS on a RISC-V board, using an open-source NeoPixel library, and building a multicore RISC-V system capable of running Linux.

These examples illustrate why a usable development path depends on more than hardware openness. Engineers also need suitable software, tools, platform support, and documentation. The ISA creates a shared foundation, but the surrounding ecosystem determines what can be built and how efficiently teams can develop and debug it.

FPGAs for evaluation and research

RISC-V FPGA implementations have also been used in open hardware challenges focused on processor efficiency and resistance to security attack vectors. Because the implementations are available for inspection, participants can explore different design techniques and compare approaches within the scope of a challenge.

FPGAs can also support system-level research. The FireSim project, for example, uses cloud-based FPGA instances and emphasizes accurate performance modeling rather than emulation speed. Its stated goal is to model a datacenter to support software and hardware co-development. This illustrates a broader use of FPGA-based systems: evaluating designs at a scale or level of detail that can inform development before final hardware is available.

Practical considerations for automation teams

RISC-V and FPGA technology can give engineering teams room to investigate custom processor and platform requirements. But an open ISA should not be mistaken for a complete, ready-to-deploy automation platform. Before choosing an approach, teams should identify which components are open, what toolchains and software are available, and whether the platform meets the project’s functional and integration needs.

For a proof of concept, an FPGA-based RISC-V design may provide a practical environment to assess architectural changes. The key benefit is the ability to explore the implementation while retaining a defined ISA. Moving from experimentation to a production system still requires attention to the complete hardware and software stack.

Conclusion

RISC-V provides an open instruction set standard; FPGAs make it possible to reconfigure hardware implementations for experimentation. Together, they let developers investigate CPU configuration, ISA extensions, processor alternatives, and platform-level changes without treating a new silicon design as the first step. For industrial automation decision-makers, the practical opportunity lies in using that flexibility to evaluate requirements—while assessing the tools, software, and system integration needed to turn an experimental design into a working platform.

Access Official Technical PDF

About The Author