A RoHS-compliant semiconductor package declaration can help engineering, procurement and quality teams assess whether a component is suitable for a product’s materials-compliance requirements. Epson’s declaration for package PFBGA13U-177 identifies the package, states that its terminal plating is lead-free, and lists maximum concentration values for ten restricted substances. Understanding the scope of each statement is important when connecting a supplier declaration to a component record, bill of materials or finished assembly.
What the Epson declaration identifies
The document names the package using two designations: Epson package name PFBGA13U-177 and JEITA package name P-TFBGA-177-1313-0.80. It also specifies “Lead(Pb) Free” for terminal plating. These identifiers and the plating statement are useful reference points when checking whether the declaration corresponds to the package under review.
The declaration says that the product consisting of the specified package complies with the RoHS Directive 2011/65/EU and amending Directive (EU) 2015/863. It further notes that the stated substance content applies to a homogeneous material. That qualification is important: the document’s concentration values should be read in the context given, rather than treated as a separate analysis of every finished product or assembly in which the component may be used.
RoHS restricted substances and stated limits
The document lists ten substances and their maximum concentration values. Cadmium has a stated limit below 100 ppm. Each of the other listed substances has a stated limit below 1,000 ppm:
- Cadmium (Cd): <100 ppm
- Lead (Pb): <1,000 ppm
- Mercury (Hg): <1,000 ppm
- Hexavalent chromium (Cr(VI)): <1,000 ppm
- Polybrominated biphenyls (PBBs): <1,000 ppm
- Polybrominated diphenyl ethers (PBDEs): <1,000 ppm
- Bis(2-ethylhexyl) phthalate (DEHP): <1,000 ppm
- Butyl benzyl phthalate (BBP): <1,000 ppm
- Dibutyl phthalate (DBP): <1,000 ppm
- Diisobutyl phthalate (DIBP): <1,000 ppm
These are maximum concentration values, not statements that every listed substance is absent. In particular, the declaration’s “Lead(Pb) Free” terminal-plating entry and its separate lead concentration value describe different aspects of the document. The plating statement concerns the terminals; the concentration table reports the stated maximum for lead in the specified homogeneous-material context. They should be retained and interpreted together rather than substituting one for the other.
How to apply the declaration in component reviews
For a design or supplier-approval workflow, the declaration is most useful when its identifiers and scope are checked against the actual component being evaluated. A practical review can include the following steps:
- Match the package designation. Compare the Epson and JEITA package names with the part information used in the component record. Do not assume that a declaration for one package designation automatically covers other package variants.
- Record the directive reference. Preserve the stated references to Directive 2011/65/EU and amending Directive (EU) 2015/863 in the relevant compliance documentation.
- Capture the substance limits accurately. Keep the lower cadmium limit distinct from the 1,000 ppm limits stated for the other nine substances.
- Keep the material scope visible. Note that the declaration refers to homogeneous material so that downstream reviewers do not mistake it for a statement about every material in a larger assembly.
- Maintain document traceability. The declaration identifies Data No. ERC-PFBGA13U-177-03-E and names Seiko Epson Corporation. Retaining these details helps link the reviewed statement to its source document.
These checks do not extend the declaration’s scope. If a project requires information about a different part number, package configuration or material context, the appropriate step is to obtain and review documentation that addresses that specific requirement.
What the declaration does—and does not—establish
The document provides a package-specific compliance statement, a lead-free terminal-plating designation and maximum concentration values for the listed substances. It also identifies the manufacturer’s semiconductor operations organization and its quality assurance department, along with a named signatory and general manager title.
At the same time, the statement should not be treated as a universal certification for every product that incorporates the package. Its wording ties the declaration to the package and specified material context. A system integrator or manufacturer still needs to manage the component declaration within the scope of its own product and documentation process, ensuring that the part under review matches the named package.
Conclusion
For industrial electronics teams, the Epson declaration offers specific, usable compliance information: package identifiers, lead-free terminal plating, RoHS directive references and limits for ten restricted substances. The practical value depends on preserving that detail and checking the declaration’s scope against the component being selected. Accurate traceability helps prevent a package-level statement from being applied more broadly than the document supports.