Access Official Technical PDF

Share Summary:LinkedInEmail

Rugged embedded computers are often developed from commercial platforms, but moving a system into a harsh operating environment requires coordinated changes to its mechanical, thermal, electrical and I/O design. For industrial automation engineers and system integrators, the same design challenge appears when computing hardware must operate in mobile equipment, exposed installations or other demanding settings: preserve useful commercial features while addressing the environment the system must withstand.

There is no universal ruggedization checklist. Temperature, shock, vibration, electromagnetic interference (EMI), available space and cooling requirements all influence the design. A practical approach is to identify these conditions early and decide which elements of the original platform can remain common across commercial and rugged versions.

Design rugged embedded computers around the environment

Commercial-grade enclosures are generally not built for the same conditions as MIL-hardened systems. Rugged designs may need to tolerate wider temperature extremes, shock and vibration, and EMI susceptibility. Meeting those needs can add cost, so applying the same rugged construction to every commercial application may not be practical.

Where possible, planning both versions together can help maintain a shared platform. Backplane architecture, power-supply choices and module compatibility are examples of design decisions that may support both prototypes and later rugged configurations. This does not mean the systems will have identical enclosures or cooling; it means that selected components and interfaces can be considered early for reuse.

Use modular architecture to preserve flexibility

OpenVPX is one example of a backplane architecture used in ruggedized systems. A commercial air-cooled chassis designed for 3U OpenVPX boards can provide a starting point for prototyping, while design choices around power and card guides can support a transition toward a rugged version.

In the example described in the source material, VITA 62 power supplies were used in a commercial configuration and could also meet the stated requirements for avionics applications. Card guides designed to accept conduction-cooled boards allowed conduction-cooled OpenVPX modules to be used in an air-cooled system. That flexibility can be useful during prototyping, when different module types may need to be evaluated.

Backplane options also affect how adaptable a chassis is. Providing selected cutouts for VITA 67 RF connections, rather than fixing every possible configuration in advance, can leave room for prototyping and differing end-user requirements. The key is to make these decisions against the actual system architecture and interface needs.

Plan airflow and thermal management around the chassis

Cooling depends on more than fan capacity. Board power, card-cage geometry and rear transition modules (RTMs) all influence how air can move through an enclosure. In one configuration, blowers positioned above the card cage draw air from below the boards and exhaust it through the rear. This arrangement can accommodate RTMs while directing airflow across the modules.

If fans are placed behind the card cage, RTMs may obstruct airflow. Moving the fans above the RTM section may address that constraint, but can increase chassis height and weight. These tradeoffs illustrate why enclosure layout and system integration need to be considered together, rather than treating fan selection as a late-stage adjustment.

For rugged versions, designers may also need to account for thicker sheet metal, reinforced extrusions and MIL-grade fans. Extrusion rails can be designed to withstand board insertion forces; the source describes thicker rails with a double-screw arrangement as one way to reinforce the interface. Conformal coating on backplanes and power supplies can help protect against moisture, dust and salt fog. The specific measures depend on the intended operating conditions.

Choose air cooling or conduction cooling deliberately

Some applications call for a different enclosure approach rather than a modified air-cooled chassis. An Air Transport Rack (ATR) enclosure, for example, can use conduction-cooled modules. The number of slots, board heat dissipation, available space and I/O arrangement help determine whether a top-loaded or rear-loaded configuration is appropriate.

A rear-loaded design can provide a compact arrangement for a small system and allow I/O to connect directly to a panel. Larger backplanes may use a top-loaded configuration. However, a sealed enclosure without supplemental air cooling limits the heat that the boards can dissipate. Where additional cooling is needed and space permits, an enclosure with an outer wall and airflow over external fins can provide another thermal-management approach.

Account for I/O, sealing and component placement

Ruggedizing an established small-form-factor computer introduces its own integration issues. Conduction cooling may require thermal simulation to identify how heat moves from internal components, including FPGAs, into the enclosure. Heatsinks may need to be machined to fit the locations of hotter components.

Sealed connectors also take more space than commercial I/O connectors. Their placement and cable routing therefore need to be considered alongside enclosure dimensions and sealing requirements. In some designs, meeting size constraints may require prioritizing which I/O features are essential. Mounting provisions, such as panel or pole mounting, can also be included when the installation requires them.

Make ruggedization a system-level decision

For industrial and embedded computing projects, the practical lesson is to define environmental requirements before the platform is finalized. Review cooling paths, module and backplane compatibility, power supplies, EMI protection, enclosure strength and external connections as parts of one design problem. When a commercial platform may later serve in a harsher environment, early coordination can help retain useful components and reduce avoidable redesign.

Rugged embedded computers are not simply commercial systems placed in stronger boxes. Their reliability depends on matching the enclosure, cooling strategy, interfaces and protective measures to the application. Planning those choices together gives engineering teams a clearer path from a flexible prototype to a system designed for its operating environment.

Access Official Technical PDF

About The Author