Access Official Technical PDF

Share Summary:LinkedInEmail

A S700 servo amplifier is more than a motor power stage: it brings together closed-loop motion control, feedback evaluation, communications and safety functions in a unit designed for integration into industrial machinery. For engineers and system integrators, understanding these capabilities is only part of the task. Supply selection, cabinet conditions, motor and feedback compatibility, protective measures and the machine-level risk assessment all shape a successful installation.

The S701 through S724 family is described as a digital servo amplifier range with rated currents from 1.5 A to 24 A. Its onboard functions and expansion options can support different motion-control architectures, but the drive remains a component of a larger machine system. The machine builder is responsible for validating the complete installation and its safety measures.

S700 servo amplifier architecture and control

The S700 combines a digital current controller, adjustable speed controller and integrated position controller. It is intended for closed-loop control of torque, speed and/or position, using compatible brushless synchronous servomotors. The documentation also identifies support for linear motors, asynchronous motors and DC motors, subject to the required system configuration and technical data.

Feedback evaluation is available for several encoder and resolver types. The manual lists interfaces including resolver, incremental encoder, sine encoder, SSI, EnDat, BiSS and HIPERFACE, as well as SFD3 and HIPERFACE DSL single-cable connections for the hardware and firmware revisions that support them. Correct selection matters: the feedback device, wiring and drive configuration must be compatible with one another.

For machine communication and control, the standard unit includes CANopen and EtherCAT, alongside RS232 and a 24 V step-and-direction interface. Programmable analog and digital inputs and outputs provide additional means to connect control signals. Expansion slots can accommodate options such as PROFIBUS, DeviceNet, SERCOS, SynqNet, additional I/O and safety cards. The available combination depends on the selected slots and product configuration.

Power, cabinet and DC bus integration

Supply requirements depend on the model. The S7xx0 types are specified for three-phase grounded supplies from 208 V to 480 V, while S7xx6 types are specified for grounded supplies from 110 V to 230 V and can support single- or three-phase connections as described in the manual. Use the model-specific electrical data when selecting a drive and designing branch-circuit protection; do not infer the required supply or fuse rating from the family name alone.

The drive is intended for installation in a closed switchgear cabinet. Cabinet ventilation or cooling may be required to keep the enclosure ambient temperature within the stated limits. Installation also needs to account for grounding, cable routing and EMC. The manual describes integrated interference-suppression filters and gives different emission categories depending on motor-cable length; deviations from the documented system configuration can require new conformity measurements.

S700 drives have a DC bus connection that can be used to link compatible amplifiers. The manual also describes dynamic braking, with generated power distributed among amplifiers sharing a DC bus, and identifies external brake resistors and capacitor modules as system options. These arrangements require careful design against the drive’s electrical limits and the relevant connection instructions.

Safe Torque Off: function and machine-level responsibility

The S700 includes a two-channel Safe Torque Off (STO) function. STO blocks the trigger pulses to the power transistors, preventing the drive from producing motor torque through its power stage. It is a safety function, not a substitute for a complete machine safety design or for every form of electrical isolation.

The manual reports different safety levels depending on the control arrangement. Single-channel and dual-channel STO control are specified for PL d, Category 3, and SIL CL 2. A dual-channel arrangement with periodic testing of the pulse inhibitor through its feedback signal is specified for PL e, Category 4, and SIL CL 3. Achieving the higher level therefore depends on the safety control and system implementation, not simply on selecting a drive with STO.

Machine designers must perform a risk assessment and evaluate the safety functions in the context of the complete machine. The manual also warns that the drive may restart automatically after power is restored, depending on parameter settings. The control design and work procedures must address unexpected movement and prevent access to hazardous areas during applicable operating and maintenance conditions.

Commissioning and maintenance considerations

Before installation and setup, confirm that the product hardware revision matches the applicable documentation and check that the motor, feedback system, supply and drive ratings are compatible. Qualified personnel should carry out transport, mechanical installation, electrical work and commissioning according to their areas of expertise. Electrostatic-sensitive components also require appropriate handling.

Electrical hazards remain after supply disconnection. The manual instructs users to wait at least 10 minutes before touching potentially live sections or removing connections, then measure the DC bus voltage and wait until it is below 50 V before handling components. Local requirements and the machine’s procedures also apply. The enclosure and heat sink can become hot during operation, so temperature should be checked before handling.

Initial setup can be performed with the manufacturer’s setup software via the serial interface, or through the drive’s keys and LED display when a PC is unavailable. After configuration, a controlled initial drive test helps verify basic operation. Maintenance is limited: the manual says the device does not require internal maintenance, and opening it voids the warranty. External cleaning must follow the stated decommissioning and cleaning precautions.

Practical implications for machine teams

The S700 offers a broad combination of motion-control functions, feedback options, communications and STO in a single servo platform. That flexibility does not remove the need for disciplined engineering. Select the exact model and interfaces against the application, design the cabinet and power system to the documented requirements, and validate EMC and safety at machine level. During commissioning and service, follow the electrical safety procedures and account for residual voltage, heat and possible automatic restart. These steps help ensure the amplifier is integrated as a properly engineered part of the complete machine.

Access Official Technical PDF

About The Author