Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor nanotechnology is advancing through new approaches to crystal growth, materials integration and three-dimensional device fabrication. For industrial automation engineers and electronics decision-makers, these developments matter because they explore ways to build components with different geometries and material combinations than conventional planar processing readily allows. Research at the University of Illinois led by Professor Xiuling Li focuses on three notable platforms: planar III-V nanowire arrays, metal-assisted chemical etching (MacEtch) and self-rolled-up membranes (S-RuM).

These technologies remain research platforms rather than established, interchangeable manufacturing processes. Their significance lies in the fabrication possibilities they demonstrate, including device structures for high-frequency electronics, photonics, energy applications and miniaturized passive components.

Semiconductor nanotechnology for scalable device structures

Nanowires have long attracted interest for logic transistors, radio-frequency (RF) electronics and optoelectronic devices. The practical challenges are controlling their growth and making their fabrication compatible with manufacturing processes. The group’s planar III-V nanowire approach addresses these issues by growing parallel nanowire arrays laterally using selective epitaxy.

Unlike vertically oriented structures, planar nanowires lie in the plane of the substrate. This configuration is compatible with planar processing, and selective lateral epitaxy can form junctions within the growth process. The research describes epitaxial, self-aligned III-V nanowires and reports chip-scale, fabricated high-electron-mobility transistors (HEMTs) with demonstrated direct-current and RF performance. The work identifies a path toward very high-speed applications, while not establishing that such devices are already production-ready.

Heterogeneous integration beyond lattice matching

Combining III-V semiconductors with silicon or other substrates can be difficult because differences in crystal lattice dimensions and thermal expansion can introduce constraints at the interface. Nanowire geometry offers a different route to epitaxial growth: a nanowire’s small contact area with the substrate and exposed side facets can accommodate material combinations that are challenging in conventional thin-film growth.

Using metalorganic chemical vapor deposition (MOCVD) and selective-area epitaxy, the research has examined materials including GaAs, InAs, InGaAs, GaP and GaAsP on silicon and other substrates. It also reports growth on two-dimensional van der Waals surfaces, including graphene, molybdenum disulfide and boron nitride. Potential applications identified include III-V gate-all-around transistors and multijunction tandem solar cells.

For device developers, this work illustrates how substrate choice and growth geometry can be considered together when designing heterogeneous electronics and photonics. It does not remove the need to solve integration, process-control and manufacturability challenges; rather, it explores architectures that may help address material mismatch.

MacEtch: anisotropic etching through local catalysis

Etching is a core step in fabricating semiconductor devices, but conventional wet etching is generally isotropic, while dry etching can involve ion-induced material damage. MacEtch uses a metal catalyst to drive a local electrochemical reaction in the semiconductor. This enables anisotropic wet etching, in which material removal can be directed to form high-aspect-ratio features.

The research describes MacEtch across multiple semiconductor materials, including silicon, germanium, III-V compounds, gallium nitride, silicon carbide and oxides. Reported structures include nanowire arrays and nanofins, with examples reaching aspect ratios above 100:1. Variations extend the method’s capabilities: inverse MacEtch is used to form smooth sidewalls, while magnetic-field-guided MacEtch offers control over etching trajectories.

MacEtch is being investigated for applications such as three-dimensional transistors, through-silicon vias, trench memory, detectors, thermoelectric devices and photovoltaics. Its potential value for process engineers is the combination of localized etching and structural versatility. Whether it can replace or improve dry etch in a given process depends on the material, feature and manufacturing requirements.

Self-rolled membranes for compact passive electronics

Self-rolled-up membrane technology converts two-dimensional layers into three-dimensional structures through strain-driven deformation. When a membrane is released from its underlying support, differences in strain can cause it to curl. This process provides a route to compact geometries that are difficult to create through flat-layer patterning alone.

One application is miniaturized RF components. The research reports S-RuM inductors with footprints 10 to 100 times smaller than their two-dimensional counterparts and operation above 20 GHz. Stacking rolled structures to form transformers has also demonstrated near-unity coupling coefficients and high turn ratios. Related device concepts include filters, transmission lines and antennas for high-frequency applications.

These structures could be relevant to efforts to reduce the size and weight of radio-frequency integrated circuits, including for millimeter-wave communications and flexible or wearable electronics. The technology has also been explored in biological settings: silicon nitride microtubes formed by rolling membranes have been used to guide neuron growth. Those findings point to research opportunities beyond electronics, not a general-purpose manufacturing capability.

What these research platforms mean for industry

Together, planar III-V nanowires, MacEtch and S-RuM demonstrate how changes in material growth and geometry can open new device-design options. They address different constraints:

  • Planar III-V nanowires explore scalable, in-plane structures and integration of compound semiconductors with other substrates.
  • MacEtch investigates catalyst-directed wet etching for anisotropic, high-aspect-ratio semiconductor features.
  • S-RuM uses strain to create compact three-dimensional structures for passive electronics and other applications.

For industrial automation and electronics teams, the practical takeaway is to track these approaches as enabling research, while assessing their maturity against specific requirements for materials, process compatibility, device performance and production control. They do not eliminate existing engineering challenges, but they expand the set of structures and fabrication strategies that future semiconductor devices may use.

Access Official Technical PDF

About The Author