Access Official Technical PDF

Share Summary:LinkedInEmail

Semiconductor process control is becoming more demanding as manufacturers pursue higher performance, lower power consumption and greater functionality in smaller devices. Machine learning, cloud computing, high-bandwidth memory and faster communications all depend on increasingly capable semiconductors. Producing them reliably requires more than isolated equipment checks: manufacturers need measurement, inspection and analytics that provide useful information across fabrication and packaging workflows.

The 2019 combination of Nanometrics and Rudolph Technologies into Onto Innovation brought together complementary capabilities in optics, software, metrology, inspection and lithography. The broader industry lesson is that process control must connect data from multiple stages and help engineers act on it, from bare silicon quality through advanced packaging and final quality assurance.

Why semiconductor process control matters

Chipmakers seek improvements in performance, power efficiency, processing capability and storage without simply increasing device size. They pursue these goals through continued scaling, three-dimensional architectures, new materials and more complex manufacturing methods. Each change creates additional process variables to measure and control.

Metrology characterizes properties such as critical dimensions, film thickness, optical or material properties, topography and device geometry. Inspection identifies defects or contamination that could affect subsequent processing or product quality. Together, these capabilities give process engineers evidence to assess whether a manufacturing step is operating as intended and where a process excursion may have originated.

Process control has relevance across both front-end wafer fabrication and back-end packaging and test. In wafer fabs, measurements and inspection can support processes such as photolithography, etch, diffusion and chemical mechanical planarization. In packaging, inspection can reveal problems associated with bumping, dicing, assembly, redistribution layers, through-silicon vias and copper pillars.

Measurement and inspection across the wafer lifecycle

Protecting incoming silicon and advanced-node processes

Wafer quality can influence outcomes later in the fab. All-surface inspection examines the front, edge and backside of a wafer, as well as its locator notch. Backside contamination is particularly relevant before extreme ultraviolet lithography: particles can interfere with wafer focus and exposure, affecting the image formed on the front surface. Inspection before wafers enter the fab can therefore serve as an incoming quality-control step.

Other characterization methods provide information about substrate composition, epitaxial thickness, contamination and related material properties. Within the fab, optical critical dimension and thin-film metrology help characterize increasingly complex structures. These measurements are relevant as feature sizes shrink and manufacturers use new materials and device architectures.

Using process data to investigate defects

Macro defect inspection can be deployed at selected points in production to monitor processes and identify patterns that may affect yield. Wafer maps and related visualizations help engineers compare defects across wafers, dies, bumps and lots. When inspection data is combined with measurements from planned process checkpoints, analysis may help narrow down where a variation or deviation occurred.

Automated defect classification can support consistent review of inspection results, while yield analysis tools organize information from equipment, inspection and metrology systems, recipes, electrical tests and the fab environment. The purpose is not simply to collect more data; it is to make the data useful for identifying patterns, investigating root causes and guiding corrective action.

Extending process control into advanced packaging

Advanced packaging connects multiple dies or functions within a compact package. Techniques such as three-dimensional integration use stacked dies and through-silicon vias to create electrical paths between components. Fan-out wafer-level packaging uses redistribution layers to route power and signals to external connections, supporting compact system-in-package designs.

These structures create quality and process-control needs beyond conventional wafer fabrication. Two-dimensional inspection can identify visible flaws or unwanted residue, while three-dimensional measurement can characterize features such as pillars and bumps. Monitoring these attributes helps manufacturers assess packaging processes that continue to be optimized for yield and device function.

Some packaging manufacturers are also exploring rectangular panels rather than round wafers to process larger packages and increase the number of devices handled at a step. Panel formats introduce different substrate sizes and shapes, making inspection, alignment and lithography coordination important. Measurement and location information can support lithography operations by helping define where individual dies are positioned on the substrate.

From measurements to factory-level decisions

Standalone instruments provide information at specific process steps, while integrated metrology places measurement capability directly on wafer-processing equipment to support near-real-time process feedback. Factory and enterprise software can bring together data from multiple tools and sources, making it possible to analyze trends across lines or facilities.

Advanced process control software can support run-to-run control, fault detection and classification, and tool automation. In run-to-run control, process settings can be calculated in response to variation in incoming material or minor equipment instability. Fault detection can identify or predict tool problems. These functions are intended to help factories improve capacity and yield while reducing rework and scrap.

For engineering teams, the practical value depends on connecting data to an actionable question. A useful process-control approach should help determine:

  • Which inspection or metrology points provide meaningful visibility into critical process steps?
  • Can data from tools, wafer maps, recipes and electrical testing be analyzed together?
  • Are defect patterns consistent across wafers, lots, tools or facilities?
  • Can the results identify a likely process source so teams can investigate and respond?

Conclusion: build process visibility around decisions

As semiconductor devices and packages become more intricate, quality cannot be managed through a single measurement or inspection point. Semiconductor process control brings together metrology, defect inspection, lithography coordination and yield analytics across wafer fabrication and packaging. For plant managers, process engineers and system integrators, the practical priority is to establish measurement and data flows that reveal process variation in context. Better visibility supports more focused investigation and gives manufacturing teams a stronger basis for yield-related decisions.

Access Official Technical PDF

About The Author