Access Official Technical PDF

Share Summary:LinkedInEmail

SiC and GaN epitaxy equipment serves a critical step in manufacturing wide-bandgap (WBG) semiconductor devices. Silicon carbide (SiC) and gallium nitride (GaN) are increasingly used in power electronics and other applications where their material properties can support smaller, lighter or more efficient electrical systems than silicon-based designs. Producing these devices requires controlled growth of semiconductor layers on wafer substrates, placing reactor design and process consistency at the center of the manufacturing challenge.

Epiluvac, founded in Lund, Sweden, develops equipment for two parts of this supply chain: chemical vapor deposition (CVD) reactors for epitaxial growth and physical vapor transport (PVT) furnaces for bulk crystal growth. Its equipment is aimed at research and development and low- to medium-volume production, with process requirements that also inform future manufacturing capacity.

Why SiC and GaN change equipment requirements

Power converters in applications such as electric vehicles, renewable energy systems and chargers rely on semiconductor devices to control and convert electricity. WBG materials are attracting interest because they can enable power electronics with different performance and design possibilities compared with silicon. SiC is associated particularly with higher-power applications, while GaN is used in areas including power conversion, radio-frequency systems and advanced optoelectronics.

These materials do not remove the need for careful process control. Device structures are built from epitaxial layers whose thickness, doping and quality must meet demanding requirements. Manufacturers also need repeatable runs, suitable wafer throughput and the ability to work with larger wafer formats. For equipment developers, the challenge is to balance these process goals with operational cost, maintainability and flexibility for research or early production.

How hot-wall CVD supports SiC and GaN epitaxy

Epiluvac’s epitaxy systems use a hot-wall CVD configuration. In this approach, the heated process chamber is designed to reduce temperature differences within the deposition volume. Temperature uniformity is important because variation can affect the growth of material across a wafer and the consistency of results between runs.

The company describes its reactors as single-wafer systems, with process temperatures up to 1,800°C and wafer diameters up to 200 mm. Features used to manage growth conditions include multi-zone temperature control, wafer rotation and controlled wafer heating and cooling. Reactors can also be configured for chlorinated chemistry, which is used to support high growth rates in relevant processes.

Automation options, including hot-wafer loading and cassette handling, address wafer movement and throughput. Process geometry and control over temperature, gas flow and process steps contribute to repeatability and flexibility. These considerations are especially relevant to facilities that need to move between development work and demanding, smaller-scale production.

Chamber design and contamination control

The ER3 reactor platform was introduced with a process chamber design that does not use quartz. The stated purpose is to avoid silicon contamination in the grown layer, a concern in some growth processes, including GaN. The platform also provides 200 mm capability for SiC epitaxy. Optional in-situ measurement and temperature-control features provide additional process monitoring and control.

Maintenance is another equipment consideration. The platform includes in-situ cleaning, intended to support repeatability and extend the intervals between manual cleaning. Consumable lifetime and time between maintenance activities can affect operating costs, so reactor selection involves more than comparing deposition performance alone.

Bulk crystal growth is part of the same production chain

Before epitaxial layers can be deposited, manufacturers need suitable wafer substrates. For SiC, PVT furnaces are used to grow bulk crystals from which wafers can be made. Epiluvac offers modular PVT equipment designed for parallel operation and a compact footprint, with options for customization.

Bulk-growth equipment has its own priorities. Stable temperature control, straightforward loading and unloading, and equipment cost are important considerations. Including both crystal-growth furnaces and epitaxy reactors in an equipment portfolio addresses separate stages of material production; it does not mean that the same system performs both processes.

Matching reactor capability to the application

Equipment requirements depend on the intended device and production setting. Power electronics and advanced optoelectronics can require high-quality epitaxial material, uniform thickness and doping, low particle levels, repeatable runs and the flexibility to develop processes. Larger wafer capability may also matter as manufacturers pursue production on bigger substrates.

Hot-wall single-wafer reactors are one approach to these requirements. They are designed for high-temperature processes, including SiC growth, and allow close control of conditions around an individual wafer. The source material also identifies the capability to grow thick SiC layers as relevant to certain medium-voltage device structures. However, equipment selection should be based on the specific process, device architecture and production objectives rather than on reactor type alone.

For facilities assessing systems, useful evaluation areas include:

  • Material quality: uniformity, thickness, doping and wafer flatness.
  • Process control: temperature management, gas-flow control and run-to-run repeatability.
  • Throughput and handling: wafer size, loading methods and automation options.
  • Operational demands: cleaning intervals, consumables, maintenance and cost of ownership.
  • Development flexibility: ability to adjust process steps and accommodate evolving requirements.

Practical implications for equipment buyers

SiC and GaN manufacturing brings together demanding materials, high-temperature processing and evolving device requirements. Reactor performance must be considered alongside wafer handling, maintenance, process flexibility and the quality of the resulting layers. Bulk SiC growth adds a separate equipment decision for organizations involved in substrate production.

For engineers and technical decision-makers, the practical next step is to define the process window and production scale the equipment must support, then assess how the reactor’s temperature control, chamber design, wafer capacity and service requirements align with those needs. As WBG applications develop, equipment platforms that can accommodate process development and larger wafer formats may offer useful flexibility—but suitability ultimately depends on demonstrated performance for the intended material and device process.

Access Official Technical PDF

About The Author