Access Official Technical PDF

Share Summary:LinkedInEmail

SiC and GaN power semiconductors are moving into a wider range of applications, while silicon MOSFETs continue to improve in low-voltage conversion. Developments presented around APEC 2020 show how engineers are weighing switching performance, efficiency, integration, thermal design and cost when selecting devices for power systems. The changes matter across industrial drives, renewable-energy equipment, servers, EV charging and compact power supplies.

SiC and GaN power semiconductors broaden their reach

Silicon carbide (SiC) and gallium nitride (GaN) featured prominently in the product news and demonstrations associated with APEC 2020. SiC activity included new MOSFET generations, gate drivers and power modules, as well as designs for inverters, onboard chargers and industrial motion control. GaN developments ranged from integrated adapter power stages to high-frequency converters, motor drives and LiDAR systems.

These technologies are not interchangeable choices based on a single voltage or power threshold. Device properties, topology, switching frequency, required integration and system cost all influence the decision. Silicon remains part of that picture: suppliers continue to use silicon superjunction MOSFETs where they meet design needs, while GaN or SiC may be appropriate when specific performance or form-factor requirements justify them.

SiC MOSFET advances target efficiency and simpler drive design

SiC MOSFET announcements pointed to ongoing improvements in on-resistance, switching losses and device behavior. Rohm outlined a fourth-generation design that further optimizes its trench structure. The planned devices were intended to reduce on-resistance and switching losses, minimize parasitic turn-on, and support 15-V/0-V gate-drive voltages without requiring a negative supply. These changes can ease gate-driver design and reduce some tradeoffs between efficiency, device size and cost.

Gate-driver development is also important as SiC moves into more applications. An isolated driver previewed by Rohm combined galvanic isolation with high source and sink current capability, protection functions and temperature reporting across the isolation barrier. Strong drive capability can remove the need for an intervening buffer stage, while integrated monitoring can reduce external components.

Other announced SiC devices and demonstrations addressed solar inverters, uninterruptible power supplies, server supplies, EV charging and traction systems. Examples included a three-phase inverter for motion control, a totem-pole power-factor-correction board and an 11-kW three-phase onboard charger. Together, these illustrate how faster switching and device characteristics can support compact designs and reduce passive-component requirements, subject to the needs of the complete power stage.

GaN supports higher-frequency and integrated designs

GaN news emphasized integration and operation at higher switching frequencies. In adapter and charger designs, higher frequency can reduce the size of magnetics and capacitors. Integrated GaN solutions can also combine the power switch with drive and protection circuitry, helping designers build a more consolidated power stage.

Topology remains central to deciding where GaN makes sense. For adapter applications, silicon superjunction MOSFETs can serve single-ended flyback designs, while GaN may be selected when higher frequency, increased power density or a flatter form factor is a priority. An active-clamp flyback can recover transformer leakage energy, an important consideration when transformer coupling and leakage inductance must be balanced.

GaN demonstrations also showed the flexibility of multilevel conversion beyond high-voltage systems. One reference design used a multilevel topology to convert a higher-voltage bus to a laptop power rail, addressing space constraints that made a conventional multiphase buck less suitable. Other examples included 48-V server conversion, bidirectional DC-DC conversion and compact motor drives. In robotics, a small, lightweight drive can be valuable where power electronics must fit within a joint.

Application-specific designs extended to LiDAR pulse generation and space power. GaN’s switching behavior was applied to both direct and indirect time-of-flight LiDAR concepts. For space systems, the reported use of GaN devices in a converter highlighted their relevance to designs where single-event effects are a concern and topology choices affect fault behavior.

Packaging and integration keep point-of-load regulators evolving

Point-of-load (POL) regulators remain a practical area of progress, particularly in servers, storage, telecommunications and industrial systems. New designs combine updated control methods with improved MOSFETs and packaging. One POL family used fast constant-on-time control intended to deliver rapid transient response while maintaining line and load regulation. Higher switching frequency can support smaller designs, but control behavior and capacitor requirements still need to be assessed in the context of the application.

Packaging improvements also affect thermal performance and power density. Developments included compact buck modules with integrated inductors and high-current converters that can be stacked and addressed as a single device through PMBus. In industrial drives, transfer-molded power modules were presented as an alternative to gel-filled packages, with changes aimed at thermal performance, reliability and package size.

Choosing devices at the system level

For engineers and technical decision-makers, the product announcements reinforce several design considerations:

  • Match the semiconductor to the application. Consider bus voltage, switching frequency, topology, output power and required form factor rather than treating a material as a universal replacement.
  • Assess the full gate-drive and protection scheme. SiC and GaN switching behavior makes gate-driver capability, isolation, fault handling and layout part of the device-selection decision.
  • Evaluate packaging and thermal paths. Integrated power stages, leadframes, molded modules and heatsinking influence board area and heat management alongside the semiconductor itself.
  • Balance system benefits against cost and complexity. Higher density or frequency may be valuable, but the appropriate choice depends on what the end application requires.

Conclusion

APEC 2020 developments showed wide-bandgap devices advancing across industrial and commercial power conversion, while silicon MOSFETs and POL technologies continued to gain through device, control and packaging improvements. The practical takeaway is to make semiconductor selection at the system level: compare topology, drive requirements, thermal design, integration and cost against the application’s actual priorities. SiC and GaN expand the available design options, but the best solution depends on how those options fit the complete power system.

Access Official Technical PDF

About The Author