Solar energy systems convert energy from the sun into electricity or useful heat. For industrial facilities and technical decision-makers, understanding the resource behind these systems is an important first step: solar radiation varies by wavelength, atmospheric conditions and time of day, and those differences affect how energy is measured and used. The two main conversion routes are photovoltaics (PV), which generate electricity directly, and solar thermal technologies, which capture heat.
What solar radiation means for energy systems
Solar energy originates in nuclear fusion reactions in the sun and reaches Earth as electromagnetic radiation across a broad range of wavelengths. A photon’s energy depends on its frequency and wavelength: higher-frequency, shorter-wavelength photons carry more energy. This spectral distribution matters because different technologies interact with different parts of the incoming radiation.
To describe sunlight quantitatively, engineers use several related terms. Spectral power density describes incident radiant power per unit area and wavelength. Irradiance, measured in watts per square metre (W/m²), describes the total radiant power received per unit area. Spectral irradiance expresses how that power is distributed across wavelengths. These measures help distinguish overall sunlight intensity from its wavelength-by-wavelength composition.
The sun’s spectrum is often approximated using blackbody radiation, a model describing how an ideal absorber and emitter radiates energy according to its temperature. This approximation helps explain the broad shape of the solar spectrum, but sunlight at ground level is also shaped by its passage through the atmosphere.
How the atmosphere changes the solar resource
As solar radiation travels through Earth’s atmosphere, atmospheric components scatter, absorb and reflect some of it. The amount reaching a surface therefore depends partly on the length of the path through the air. The optical air mass describes this path relative to the shortest route, which occurs when the sun is directly overhead. As the sun moves away from the zenith, sunlight travels through more atmosphere.
Solar performance comparisons commonly refer to standard spectra. AM0 represents the solar spectrum outside Earth’s atmosphere. AM1.5 is a widely used reference for comparing solar-cell performance and is normalized to a total irradiance of 1,000 W/m². Ground-level radiation also has two components: direct sunlight reaching the surface without being scattered, and diffuse sunlight arriving after scattering or reflection. The AM1.5 global (AM1.5g) and direct (AM1.5d) designations distinguish whether diffuse radiation is included.
These distinctions are relevant when interpreting measurements or comparing equipment. A reading of total irradiance does not, by itself, describe the direct and diffuse contributions or the spectrum that produced it.
Solar radiation measurement
Pyranometers measure global irradiance
A pyranometer measures global solar radiation received from the hemisphere above its measurement plane. Many common instruments use a thermopile: multiple thermocouples connected in series are attached to a blackened absorbing surface. The surface is shielded to reduce convective heat loss and insulated against conductive heat loss. Incoming radiation warms the absorber, and the instrument converts the resulting temperature response into an irradiance reading using calibration.
Time-series readings can show how the available solar resource changes over a day. Clear and cloudy conditions produce different irradiance profiles, so measurement records help describe site conditions rather than relying on a single instantaneous value.
Pyrheliometers measure direct radiation
A pyrheliometer measures direct solar radiation and is used with a sun tracker to keep it aimed at the sun. The distinction between this direct measurement and a pyranometer’s global measurement is important when a system assessment needs to account for direct and diffuse sunlight separately.
Photovoltaic systems convert light into electricity
A photovoltaic cell is the basic building block of a PV system. It converts light into direct-current electricity through the photovoltaic effect. Most solar cells use semiconductors, whose electrical properties can be modified through doping to create n-type and p-type material. Joining these differently doped layers forms a p-n junction.
When suitable photons are absorbed, their energy enables electrical charge generation in the semiconductor. Only photons with energy greater than the material’s band gap can be absorbed in this way. The resulting voltage is produced across the junction, and the cell supplies electrical power when connected in a circuit.
A single cell produces only a small voltage—approximately 0.5 V in the source material—so cells are connected in series or parallel to achieve the required module voltage and power. Modules can then be interconnected into larger panels or arrays. At the system level, PV installations are commonly classified as stand-alone or grid-connected, depending on their operating requirements, component configuration and relationship to electrical loads or power sources.
Solar thermal applications provide useful heat
Solar thermal technologies capture solar energy as heat rather than converting it directly into electricity at a cell. Applications include agricultural crop drying, daylighting and space heating, active solar heating using collectors, water heating and solar cooking.
Concentrating solar power (CSP) systems use mirrors to concentrate sunlight and produce high-temperature heat. That heat is used to generate electricity through a steam generator. The conversion route is therefore different from PV: CSP first produces heat, while PV cells generate electricity directly from light.
Practical implications for system planning
Choosing and assessing solar energy systems requires clarity about both the intended output and the solar resource. Irradiance measurements indicate how much radiant power reaches a surface, while information about air mass, spectrum and direct versus diffuse radiation provides context for interpreting that measurement. Pyranometers and pyrheliometers serve different measurement purposes and should not be treated as interchangeable.
For technical decision-makers, the practical takeaway is to match the conversion technology to the application: PV for direct electricity generation, and solar thermal options where heat is the required output. Understanding how sunlight is characterized, measured and converted creates a sound basis for evaluating system configurations and their role in facility energy planning.