Access Official Technical PDF

Share Summary:LinkedInEmail

The spin Seebeck effect offers a way to generate spin currents from a temperature gradient rather than relying solely on charge-current flow. Understanding how quickly that current develops—and how magnetic excitations carry it through a material—is important for evaluating spin-caloritronic concepts and interpreting measurements. Time-resolved experiments on platinum-coated yttrium iron garnet (YIG) films provide evidence that the longitudinal spin Seebeck effect (LSSE) involves ballistic transport of thermal magnons at room temperature.

The central result is not simply that the measured signal changes with film thickness. Its time profile does, while analysis using a ballistic propagation model yields an effective magnon propagation length that is nearly independent of thickness. That distinction helps explain why the choice of transport model matters when extracting material properties from transient measurements.

How the spin Seebeck effect is detected

In the LSSE, a thermal gradient across a magnetic material drives a magnon-mediated spin current. Magnons are the quanta of collective spin excitations. When they reach the interface between a magnetic insulator and a normal metal, they can transfer angular momentum into the metal.

In a YIG/Pt bilayer, the spin current entering the platinum layer is detected electrically through the inverse spin Hall effect (ISHE). Spin-dependent electron scattering in the metal converts the spin current into an in-plane charge response, measured as a voltage. The signal therefore reflects processes in both the magnetic layer and the metal, although the electron response in the metal is much faster than the measured dynamics in these experiments. The time-dependent voltage can consequently provide information about magnon transport in YIG.

Measuring transient LSSE signals across YIG thicknesses

The experiments used YIG films ranging from 150 nanometers to 53 micrometers, each coated with a 10-nanometer platinum layer. Microwave pulses heated the platinum, creating a thermal gradient across the interface and through the YIG. The resulting ISHE voltage was recorded as the LSSE developed.

To separate the magnetic signal from nonmagnetic thermoelectric contributions, measurements were taken with opposite orientations of the applied magnetic field. The LSSE voltage changes sign when the field is reversed, so subtracting the two measurements isolates the field-dependent component.

The voltage profile varied systematically with YIG thickness. In the thinnest films, the signal rose almost immediately and approached a rectangular pulse shape. As the films became thicker, the rise slowed and saturation occurred later. The thickest samples—23, 30 and 53 micrometers—showed very similar profiles to one another. Longer heating pulses also revealed a gradual signal increase in thick films over extended time intervals.

This pattern is consistent with a thickness-dependent contribution from magnons generated at different distances from the YIG/Pt interface. Magnons farther from the interface take longer to contribute to the detected voltage. The measured transient also depends on how the temperature gradient develops within the layered structure, so the voltage profile cannot be interpreted as a direct measure of magnon travel time alone.

Why the transport model changes the interpretation

To analyze the measurements, the researchers calculated the time- and position-dependent temperature gradient and fitted the predicted LSSE response to the observed voltage profiles. A basic model weighted the local gradient by an exponential factor describing the reduction in magnon contribution with distance from the interface. However, this model did not include the time required for magnons to reach the interface. When fitted across the different film thicknesses, it produced propagation-length estimates that increased with thickness.

That thickness dependence raised a concern: if the fitted length is intended to represent a material property, it should not keep growing simply because the film is thicker, particularly when the film is much thicker than the propagation length. Adding a diffusive travel-time term did not resolve the issue using the assumed room-temperature mean free path. The authors also noted that this simplified diffusion treatment may not adequately describe the relevant transport.

Why quasi-acoustic magnons support a ballistic picture

The alternative model draws on the dispersion of the lowest magnon branch in YIG. At energies above approximately 20 kelvin, this branch is nearly linear over a broad frequency range, resembling the dispersion of acoustic phonons. In the model, these quasi-acoustic magnons travel at an approximately constant group velocity, and their delay depends linearly on distance: a magnon traveling farther takes proportionally longer to reach the interface.

The proposed physical explanation is that, for an ideal linear dispersion, the main magnon interaction processes discussed in the study do not change the direction or speed of the propagating magnon packet. Interactions can still affect the packet and its population; scattering associated with defects and interactions involving other magnon modes can limit how far magnons travel. Thus, “ballistic” here describes the modeled propagation of the relevant quasi-acoustic magnons, not an absence of interactions or losses.

What the thickness comparison indicates

Fitting the transient signals with the ballistic delay produced effective propagation lengths that changed only slightly as YIG thickness increased. The reported average was about 425 nanometers, with the fitted length approaching approximately 435 nanometers in the thicker films. The authors interpret this near-constant value as support for ballistic propagation of quasi-acoustic magnons in room-temperature YIG.

The comparison also illustrates a practical point for experimental analysis: a fitted transport length depends on the assumptions built into the model. A model that omits propagation delay, or represents it with an unsuitable diffusion approximation, can yield a thickness-dependent estimate. Incorporating the timing of magnon travel changes the interpretation of the same measured voltage waveforms.

Practical implications for spin-caloritronic research

For engineers and researchers assessing spin-based device concepts, the study highlights the value of time-resolved characterization alongside steady-state measurements. Transient signals can help distinguish thermal-gradient evolution from transport through the magnetic layer, but doing so requires a model that accounts for both. The results are specific to the YIG/Pt structures and experimental conditions described; they do not establish that every magnetic material or device will exhibit the same transport behavior.

More broadly, the findings connect material thickness, magnon dynamics and electrical detection in one measurement framework. Treating the effective propagation length as a material-related quantity—and checking whether it remains consistent across samples of different thicknesses—provides a useful test of whether a transport model is physically appropriate.

Conclusion

Time-resolved LSSE measurements show that YIG film thickness strongly shapes the voltage rise and saturation, while a ballistic model of quasi-acoustic magnon propagation yields an effective length that is nearly thickness-independent. For spin-caloritronic research, the practical lesson is to account for magnon travel time when interpreting transient signals. Doing so can produce a more consistent picture of how thermal magnons carry spin current from the bulk of a magnetic insulator to a metal interface.

Access Official Technical PDF

About The Author