Access Official Technical PDF

Share Summary:LinkedInEmail

Spintronics uses the spin of electrons, alongside their electrical charge, to create and control signals. For industrial automation, its most established contribution is magnetic sensing: spintronic sensors are used for applications such as position, speed, angle and current measurement. The same underlying technologies are also being developed for nonvolatile memory, radio-frequency (RF) components and alternative computing architectures. Their potential is significant, but practical adoption depends on how well devices integrate with conventional electronics and meet system-level requirements.

How spintronics differs from conventional electronics

Conventional electronic components primarily process information through the movement of electrical charge. Spintronic devices also exploit electron spin and the interaction between electrical and magnetic signals. This creates ways to detect magnetic fields, store data in magnetic states, and generate or process signals using magnetic dynamics.

The field has already moved beyond laboratory research in several areas. Giant magnetoresistance (GMR) and tunnelling magnetoresistance (TMR) technologies are used in commercial magnetic sensors, while magnetic tunnel junctions (MTJs) are the basis of a growing class of nonvolatile memory. Other applications—including spin-wave logic and some RF functions—remain at earlier stages of development.

Spintronics in industrial automation: magnetic sensing

Magnetic sensors are the most immediately relevant spintronic technology for many industrial users. TMR sensors measure changes in electrical resistance associated with the relative magnetic orientation of layers in an MTJ. In a typical sensor stack, a reference magnetic layer provides a fixed direction, while a free layer responds to an external magnetic field. The resulting resistance change can be converted into an electrical measurement.

TMR sensors are being used or developed for position and proximity detection, linear and angular encoders, scanners, and electrical current measurement. In industrial settings, magnetoresistive sensors can serve as alternatives to optical or Hall-effect approaches in some applications. Their small size, CMOS compatibility and sensitivity are among the characteristics that make them useful to consider. The appropriate choice still depends on the measurement range, required accuracy, environmental conditions, packaging and total system cost.

Sensor performance is not determined by the sensing element alone. TMR devices are commonly integrated into a Wheatstone bridge to provide a balanced output in the absence of an external excitation. Signal conditioning and higher-level electronics may be incorporated in a discrete package or combined with an application-specific integrated circuit (ASIC). These interfaces matter when evaluating noise, accuracy and integration effort within an automation system.

Where sensor development is focused

Further materials and process development is needed to improve sensor output and signal-to-noise ratio. Control of layer growth and compatibility with industry-oriented deposition processes are important considerations. Researchers are also investigating magnetic configurations that may extend dynamic range, as well as vortex-based sensing approaches. Meanwhile, low-frequency 1/f noise remains a concern because it can limit the smallest detectable signal.

Industrial and automotive applications also place demands on long-term accuracy under challenging operating conditions. In electric vehicles, for example, magnetic disturbances from motors and nearby components can complicate measurement. The broader lesson for automation teams is that sensitivity and compact size do not, by themselves, establish suitability: performance must be assessed in the intended installation and across its operating life.

Nonvolatile memory for embedded systems

Spin-transfer-torque MRAM (STT-MRAM) stores information in magnetic states and retains data without continuous power. Its reported advantages include fast switching, endurance and compatibility with CMOS processes. Commercial STT-MRAM has entered use as an alternative to embedded flash in some cache-memory applications, with potential to serve other memory roles.

For automation equipment and industrial computing, nonvolatile memory could support architectures that reduce standby power or resume operation quickly after shutdown. However, memory selection is a system decision. STT-MRAM still faces challenges in scaling cell size, reducing write current and balancing operating speed with data retention. Spin-orbit-torque MRAM (SOT-MRAM) offers the prospect of faster switching and improved endurance, but current requirements and cell footprint remain challenges. Voltage-controlled approaches are also under study, though reliable switching and adequate data retention are unresolved practical issues.

RF devices and emerging computing concepts

Spintronic devices can convert direct current into RF signals and can also detect RF signals by converting them into a DC output. These functions are being explored for compact signal generation, frequency-selective detection and power harvesting. Spin-torque nano-oscillators and spin Hall nano-oscillators can produce magnetic oscillations, while changes to the applied current can tune or modulate their frequency.

Potential uses include wireless sensor networks and other communication systems, but integration with CMOS, signal stability, output power and conversion efficiency need further work. Magnonic devices, which use spin waves to carry information, have also been proposed for filters, delay lines and logic. Their practical adoption is constrained in part by inefficient conversion between electrical signals and spin waves, which contributes to insertion losses.

Spintronics is also being investigated for Boolean logic and non-Boolean approaches such as neuromorphic and reservoir computing. Proposals include nanomagnet logic, domain-wall devices, spin-wave circuits and networks of synchronized oscillators. Many are still conceptual or at proof-of-concept stages. Circuit-level requirements—including cascading, fan-out, noise tolerance and reliable signal restoration—are not automatically solved by demonstrating an individual device.

What engineers should consider

When assessing spintronic technology for an automation application, decision-makers should distinguish between established components and emerging concepts. Magnetic sensors and selected MRAM products have a stronger path to deployment than many spin-wave or spintronic-computing proposals. Evaluation should include:

  • The required sensing range, accuracy, bandwidth and resistance to noise.
  • Operating conditions, including temperature and magnetic interference.
  • Interface requirements for signal conditioning, ASICs or CMOS integration.
  • Memory write behavior, retention, endurance and power needs, where applicable.
  • Technology readiness and the performance of the complete system, not just a device-level demonstration.

Conclusion

Spintronics already has practical relevance to industrial automation through magnetoresistive sensing, while MRAM provides a developing option for embedded nonvolatile memory. RF, magnonic and spin-based computing concepts may expand the technology’s role, but many require advances in materials, fabrication, integration and circuit design. For technical teams, the most useful approach is to match each application to the maturity and system-level performance of the specific device—not to assume that a promising physical effect is already an industrial-ready solution.

Access Official Technical PDF

About The Author