Strain-annealed magnetic cores offer power electronics designers a way to tailor magnetic behavior at the material and component level. By processing amorphous metal ribbons under controlled tension and temperature, manufacturers can induce anisotropy and adjust permeability. The approach is intended to address familiar core-design trade-offs involving air gaps, winding losses, size and magnetic linearity—particularly in demanding inductor and transformer applications.
Rather than relying solely on core geometry or discrete gaps to set effective permeability, engineers can use strain annealing to influence the material’s magnetic properties. That creates opportunities for gapless designs and for cores whose permeability is constant or deliberately varied along their length.
Why conventional magnetic core designs face trade-offs
Air gaps are commonly used to reduce a core’s effective permeability and make its magnetic response more suitable for an application. But the gap also creates design and manufacturing considerations. Its length must be controlled, and the gap can introduce fringing flux, which may increase winding losses. Other concerns include proximity losses and eddy-current losses associated with a shorted cut surface.
Distributed-gap approaches, including powder cores and ferrite designs, can address some limitations of a single large gap. However, powder cores can have nonlinear inductance-versus-current behavior, fixed permeability characteristics and size constraints. The relevant trade-offs depend on the application; no single core type resolves every design requirement.
Strain-annealed materials are being developed to offer another option: a core without discrete gaps, with a more linear B-H characteristic, high saturation capability and permeability that can be tuned. These are design goals and potential advantages, not a guarantee that one core will meet every application’s requirements.
How strain annealing enables permeability engineering
Strain annealing is an advanced heat-treatment process applied to amorphous metal ribbons (AMRs). During annealing, controlled tension and temperature promote nanocrystallization and induce magnetic anisotropy. The resulting anisotropy affects permeability, allowing magnetic properties to be adjusted through the manufacturing process rather than only through core assembly.
Key process variables include alloy chemistry, applied tension, and annealing temperature and time. In cobalt-based alloys, the process can produce different hysteresis-loop shapes, including square and sheared loops associated with different relative permeability. The reported material characteristics also include improved mechanical properties and temperature-stable induced anisotropy.
Ribbon production begins with planar flow casting. The source describes amorphous ribbons cast in widths from 0.25 to 2 inches (about 6.4 to 50.8 mm) and thicknesses of approximately 15 to 25 micrometers. The ribbon is collected on a spool, then processed through strain annealing before later core manufacturing steps. In-line processing before final winding is a notable feature of the approach.
Constant and graded permeability for component design
Permeability engineering can be used to create a core with a selected, relatively constant permeability or to vary permeability along the ribbon. The latter can be produced by changing tension during processing. A graded core is intended to shape the magnetic flux distribution; the design concept is that flux smoothing can contribute to a more uniform temperature distribution.
Comparative tests described for constant- and graded-permeability cores used square-wave excitation at 20 kHz, with 50 primary turns and 10 secondary turns. The reported test conditions included 250 Vdc input at a peak flux density of 0.15 T, and 220 Vdc at 0.13 T, each over a 30-minute continuous test. These conditions illustrate how engineered permeability can be evaluated in a component, but they should not be treated as universal operating limits or as a substitute for application-specific validation.
Potential applications in inductors and transformers
One development activity focused on a high-frequency inductor for medium-voltage, megawatt-scale electrical machinery. The design considerations included medium-voltage isolation, core losses, power density, winding capacitance and cooling. The prototype used a gapless strain-annealed nanocrystalline core, a custom bobbin and a multi-strand winding, with liquid immersion cooling.
In the comparison presented for a 440 µH filter inductor, the strain-annealed design was evaluated alongside Kool Mu and iron-alloy powder-core designs. The reported assemblies differed in construction and cooling method. The strain-annealed version had a reported total mass of 20 kg, compared with 60 kg for the Kool Mu design and 100 kg for the iron-alloy powder design; its metal mass was reported as 12 kg. The comparison also characterized it as 2–2.5 times smaller. These figures describe the specific designs compared, not a general performance guarantee for all strain-annealed components.
In three-port, tri-axial winding transformers, permeability-tuned cores can be positioned between windings. The stated design uses include controlling leakage inductance, reducing inter-winding and self-capacitance, and minimizing losses associated with normal fluxes. In both inductors and transformers, the practical value depends on how the engineered core interacts with the complete magnetic, electrical and thermal design.
Data and optimization support better design decisions
Material selection and component optimization require usable magnetic data. The DOE Office of Electricity’s Transformer Resilience and Advanced Components program supported work on soft-magnetic material data sheets and multi-objective genetic-algorithm optimization. The data sheets include B-H loops and core-loss measurements across excitation waveforms, helping designers compare materials using documented characterization rather than relying on a single headline property.
Five representative material data sheets were reported as completed: standard 3% silicon electrical steel, 6.5% silicon electrical steel, nanocomposite cores, amorphous iron-based cores and an N87 ferrite. The work also described developing open-source tools to support magnetic component design and optimization. Combining characterized material data with optimization methods can help engineers assess competing objectives such as size, mass, permeability, inductance stability, power density and cooling feasibility.
Practical implications for engineering teams
Strain-annealed magnetic cores expand the design space for soft magnetic components by making permeability a process variable. For engineers evaluating the technology, the key questions are whether a tuned or graded permeability profile benefits the component, how the core performs under the intended waveform and operating conditions, and how the complete assembly manages losses and heat.
The approach does not eliminate the need for careful characterization, prototyping or system-level validation. Its practical promise lies in enabling gapless core designs and more direct control over magnetic behavior, while standardized material data and optimization tools can support informed comparisons. For high-power inductors and specialized transformers, that combination may help designers pursue improved core utilization, compact construction and more uniform flux—provided each benefit is confirmed for the specific application.