Access Official Technical PDF

Share Summary:LinkedInEmail

Underwater optical communication offers a way to exchange data between submerged equipment without relying on a physical cable. For industrial operators, system integrators and researchers working with remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs) and sensor networks, the attraction is flexibility: optical links can support data transfer where tethering constrains movement. But designing a reliable link requires more than selecting a laser. Water quality, receiver noise, alignment and the communication protocol all influence the result.

Acoustic communication remains useful for longer underwater distances, but it generally offers lower data rates than optical approaches. Optical links are therefore a potential fit for applications that need higher-bandwidth communication over a comparatively constrained path. Their practical range and performance depend on the conditions of the water and the design of the complete transmitter-medium-receiver system.

Why water conditions shape the optical link

Light loses power underwater through two main processes: absorption and scattering. Absorption removes optical energy from the beam, while scattering redirects some of that energy away from its original path. Together, these effects attenuate the signal and reduce the power reaching the receiver.

The balance between absorption and scattering varies with water type and its composition, including the presence of organic matter and suspended particles. This means there is no universally optimal transmission wavelength. Blue wavelengths are often more suitable in clearer open-ocean water, while yellow-green wavelengths may experience lower attenuation in some more turbid waters. Engineers need to account for the intended operating environment rather than assume a single wavelength will perform best in every deployment.

This environmental dependence feeds directly into the optical link budget. The transmitter’s launched power, propagation losses, receiver aperture and sensitivity, and other system factors must be considered together. A link designed around assumptions for clear water may not deliver the same performance in water with different optical properties.

Underwater optical communication system design

A useful way to structure the design is to treat the link as three connected blocks: transmitter, medium and receiver. Each creates requirements for the others. The transmitter determines the optical signal and its modulation; the medium changes the signal during propagation; and the receiver must distinguish the intended data from noise and background light.

Transmitter and modulation choices

Laser diodes are one option for generating an optical carrier, and gallium nitride (GaN)-based sources have drawn interest for visible-light communication. The choice of source must be considered alongside its drive conditions, optical output and modulation method. Characterising the transmitter is important because its usable response affects the signal formats and data rates that can be supported.

Modulation schemes encode information in changes to the transmitted signal. Options discussed for optical communications include on-off keying (OOK), frequency-shift keying (FSK), phase-shift keying (PSK), quadrature amplitude modulation (QAM) and pulse-position modulation (PPM). These formats do not make identical trade-offs. A design may need to balance signal-to-noise ratio (SNR), bandwidth efficiency and power efficiency, while also considering the receiver and channel conditions.

Forward error correction can help a receiver recover data affected by errors. Reed-Solomon coding is one approach evaluated for this purpose. Coding adds redundancy, so its value depends on whether the reduction in required SNR for a target error performance justifies the associated transmission overhead. Modulation and coding should therefore be assessed as a combined system choice, not selected independently.

Managing solar background and receiver noise

Background light can add noise at the receiver and make the transmitted signal harder to detect. Solar radiation is an important consideration for underwater links that operate where ambient light reaches the receiver. Detector choice also matters: silicon PIN photodiodes and silicon photomultipliers (SiPMs) have different noise characteristics and should be evaluated in the context of the system.

An optical bandpass filter can reduce unwanted background light by admitting only a narrow range of wavelengths around the desired signal. One design approach is to align the filter with a Fraunhofer line, a narrow feature in the solar spectrum. The potential benefit is not without a trade-off: filter design and receiver field of view (FOV) interact. Restricting the accepted light can help with background rejection, but the receiver’s angular acceptance must still suit the geometry and alignment requirements of the link.

System modelling can help compare these choices before hardware is finalised. A model that represents water conditions, optical filtering, receiver characteristics and link geometry can help engineers explore how design changes affect SNR and receiver sensitivity. Its results depend on the assumptions and parameters supplied, so the model should reflect the intended deployment as closely as possible.

An emerging approach: acoustic optical waveguiding

A proposed Underwater Wireless Acousto-Optic Waveguide (UWAOW) uses an acoustic field to create a localised change in seawater’s refractive index. In principle, shaping that change could form a region that guides light through the water, including light redirected by scattering. The concept has been explored through different geometries and modelling approaches.

This is an emerging research direction, not a standard component that can be assumed in a deployed communication system. Its practical use would require careful evaluation of the achievable refractive-index profile, acoustic propagation and operating constraints. The concept illustrates how optical and acoustic engineering may be combined to address propagation challenges, but it does not remove the need to validate the complete link under relevant conditions.

Practical implications for industrial deployments

For project teams considering underwater optical communication, the central task is to match the system to its operating environment. Begin with the expected water conditions and link geometry, then evaluate wavelength, transmitter, receiver and modulation together. Include background light and receiver FOV in the design, and assess coding where error performance is important.

Optical links can offer a flexible alternative when cables restrict movement and higher data capacity is needed than an acoustic link can provide. Their performance, however, depends on a tightly coupled set of environmental and engineering factors. A disciplined link-budget process, supported by modelling and application-specific validation, helps determine whether an optical system is suitable for the intended underwater task.

Access Official Technical PDF

About The Author