Waste heat recovery is often discussed as a way to reduce energy losses, but capturing heat is only part of the challenge. Converting low-temperature heat into useful electricity requires technology suited to the temperature range available at a site. Heat-to-power systems designed for sources around 70–120°C offer one approach, with possible applications in industrial processes, maritime operations and geothermal energy.
The practical opportunity depends on more than the conversion equipment. Engineers and project teams need to assess the heat source, cooling conditions, integration requirements and the economics of the wider installation. These factors determine whether recovered heat can make a meaningful contribution to a facility’s electricity supply.
How low-temperature heat becomes electricity
A heat-to-power system uses a temperature difference between a heat source and a colder source to generate electricity. In the system described by Climeon, the heat source is in the 70–120°C range and the cold source is typically 0–30°C. The temperature difference is what enables the conversion process; available heat alone does not determine electrical output.
Climeon’s 2018 annual report describes its Heat Power system as modular, with one or more modules combined in an installation. The report states that the system was designed to achieve at least 10% conversion efficiency during its industrialization and that its third-generation module, released in 2017, was capable of delivering 150 kW. These figures are specific to the company’s reported technology and period, rather than universal benchmarks for heat-to-power systems.
For project teams, modularity can help align equipment capacity with a site’s heat source. It does not remove the need to assess the complete system: heat exchangers, cooling arrangements, controls and the surrounding plant all affect how an installation is designed and operated.
Waste heat recovery in industrial operations
Industrial processes can reject heat through cooling circuits, exhaust streams and other process equipment. Steelmaking is one example identified in the annual report. Heat is lost at several stages, including reheating furnaces and converter operations. Where a suitable low-temperature stream is available, a heat-to-power installation may convert part of that otherwise unused energy into electricity.
Assessing an industrial application requires a clear picture of the heat stream over time. Useful questions include:
- What are the source temperature and flow conditions, and how consistently are they available?
- Where can heat recovery equipment connect to the existing process?
- Is there a suitable cold source and a practical way to integrate it?
- How will the installation affect plant operations, maintenance and electricity use?
These considerations are especially important where a heat source varies with production schedules. A technically recoverable stream may not deliver the same operating conditions continuously, so site-specific engineering and operating data are essential to evaluating a project.
Geothermal heat power beyond high-temperature resources
Geothermal power commonly brings to mind high-temperature reservoirs, which are concentrated in particular geological regions. Low-temperature geothermal resources present a different opportunity: they can be used where the available heat is below the range traditionally suited to electricity generation. The 2018 report describes low-temperature geothermal heat as a potential source for small-scale generation, including at existing or unused wells where conditions are appropriate.
In this application, a heat-to-power system can either complement existing geothermal equipment by using heat that would otherwise go unused, or serve as the electricity-generation technology at a low-temperature site. The first geothermal installation using Climeon’s modules began producing electricity in Iceland in November 2018, according to the report. That project illustrates the importance of the surrounding facility and commissioning process, not just the modules themselves.
Distributed geothermal plants may also be relevant where local generation is useful and grid infrastructure is limited. However, the feasibility of a project depends on local geology, drilling and permitting conditions, access to heat and the design of the complete plant.
Maritime applications and energy integration
Ships produce waste heat from engine cooling water and exhaust gases. Recovering some of that heat for electricity can potentially reduce the amount of fuel required to meet onboard electrical demand. The report identifies passenger vessels as an area of interest and describes installations intended to use heat from marine engines and gensets.
Marine projects bring demanding integration and quality requirements. Equipment must be incorporated into a vessel’s systems and meet the expectations of shipyards and operators. For system integrators, the relevant assessment includes the available heat sources, vessel layout, electrical loads and requirements for testing and acceptance. A solution that works in a stationary plant cannot simply be assumed to transfer directly to a shipboard environment.
Engineering the opportunity, not just the module
Across industrial, geothermal and maritime settings, heat-to-power projects share a core principle: use an available heat source to generate electricity while accounting for the colder side of the system and the plant around it. The details differ by sector, but successful evaluation begins with understanding the actual operating conditions rather than relying on broad estimates of recoverable heat.
For operations leaders and technical decision-makers, the practical implications are clear. Map heat streams, identify how they vary, and assess integration requirements before selecting equipment. For engineers and integrators, treat the modules as one part of a wider system that includes controls, heat transfer, cooling and commissioning. Low-temperature waste heat recovery can extend the value of energy already being used, but its contribution depends on a well-matched, site-specific design.