Wide bandgap power electronics based on silicon carbide (SiC) and gallium nitride (GaN) can support power conversion at higher temperatures, voltages, and switching frequencies than conventional silicon devices. For industrial automation engineers, system integrators, and plant decision-makers, that potential matters wherever electrical energy must be converted and controlled efficiently—from motor drives and renewable generation to data centers, vehicle charging, and grid systems.
However, superior material properties alone do not guarantee broad adoption. A 2018 PowerAmerica strategic roadmap identified the connected challenges that need to be addressed: manufacturing cost, operating reliability, device and system performance, and the strength of the wider power electronics ecosystem. Its central lesson remains useful for technical planning: successful deployment depends on coordinating improvements across the whole path from materials and wafers to modules and end-use systems.
Why SiC and GaN are attracting attention
Power electronics adjust voltage, current, and frequency as electrical energy moves from generation and distribution to end users. Silicon has long served this role, but SiC and GaN offer properties that can enable smaller, more energy-efficient, and robust power components in demanding operating conditions.
The two materials are not interchangeable in every application. The roadmap positions SiC as a stronger candidate for many applications above 1.2 kV, while GaN is particularly competitive for high-frequency applications and uses below 1,200 V. The 650 V to 1.2 kV range is a space where either technology may be suitable, depending on system requirements.
Compared with silicon devices, SiC devices can provide higher breakdown voltage and thermal conductivity, operate at higher temperatures, and switch faster. GaN’s electron mobility supports high-frequency operation and can help reduce losses and increase power density. These characteristics can create opportunities to reduce the size of power conversion equipment, but application-level benefits depend on design, packaging, and system integration.
Wide bandgap power electronics: where adoption may begin
The roadmap groups potential applications by expected timing and the value SiC or GaN could offer. Near-term priorities included data centers and enterprise equipment, photovoltaic (PV) systems, and chargers. In these settings, power density, switching losses, efficiency, and operating temperature are important considerations.
- Data centers and enterprise equipment: Power supplies, DC/DC converters, and uninterruptible power supply systems rely on power conversion. The roadmap highlights high power density, low switching losses, and high-temperature operation as relevant requirements.
- Renewable energy: PV inverters convert generated DC power to AC. WBG devices are considered for improving conversion efficiency, power density, and reliability, alongside practical needs such as installation and maintenance.
- Chargers: SiC was identified as a potential option for electric-vehicle charging applications, while GaN was considered for wired and wireless consumer-device chargers. Size, weight, efficiency, and installation cost are among the system concerns described.
Mid-term application areas included electric and heavy-duty vehicles, rail traction, and industrial motor drives. In manufacturing, variable-speed motor control can match motor operation to process requirements. The roadmap also points to potential system-level benefits such as reduced reliance on gearing and improved capacity utilization. These outcomes still depend on how the drive is engineered and integrated into the application.
Higher-voltage uses, including medium-voltage drives for large pumps, fans, and compressors, were presented as longer-term opportunities. The roadmap notes that device fabrication at higher voltage ratings is challenging, which affects the expected pace of adoption.
Four connected challenges to commercial scale
1. Reduce total cost
Device cost is influenced by raw materials, wafer quality, manufacturing yield, packaging, and production volume. For GaN, the roadmap identifies the cost and quality of epitaxial wafers as important concerns. It also describes the need for high-volume manufacturing and stronger availability of materials, wafers, devices, and modules. One proposed approach was to leverage existing silicon fabrication practices and foundry capacity where suitable, rather than relying solely on new manufacturing infrastructure.
2. Establish reliability with evidence
Adoption in demanding applications requires confidence in how devices perform over time and under stress. High voltage, high temperature, and high-frequency operation can affect device degradation and failure mechanisms. The roadmap calls for more reliability data, consistent testing methods, and standards suited to SiC and GaN. For engineering teams, this underscores the importance of evaluating the device, package, and integrated system under relevant operating conditions—not relying on material characteristics alone.
3. Improve packaging and system performance
Device advances need to be matched by progress in modules, gate drivers, thermal management, and electromagnetic interference control. The roadmap identifies packaging concerns including insulation, thermal performance, parasitic effects, and partial discharge at high voltages. It also highlights the need for application-focused reference designs, circuit models, and protection capabilities. These elements affect whether a component’s switching and temperature capabilities can be used effectively in a complete power converter.
4. Strengthen the supply chain and workforce
Wide bandgap development spans wafer suppliers, device manufacturers, foundries, packaging providers, equipment makers, and end users. Limited supplier availability and gaps in shared information can slow qualification and commercialization. The roadmap therefore emphasizes collaboration, accessible reliability information, supply-chain partnerships, and workforce development. It also recommends monitoring complementary technologies, including high-frequency magnetics, that can influence system performance.
Practical implications for engineering teams
For organizations assessing SiC or GaN, technology selection should begin with the application’s voltage, switching frequency, thermal environment, reliability requirements, and system-level cost. A device’s potential efficiency or power-density advantage must be considered alongside gate-drive design, packaging, thermal management, qualification evidence, and component availability.
Teams can also reduce uncertainty by comparing candidate solutions in the intended application and examining the full bill of materials, rather than judging devices in isolation. The roadmap’s emphasis on demonstrations, reliability testing, and reference designs reflects a broader point: adoption requires evidence that a complete system can meet its operational requirements.
Conclusion
SiC and GaN expand the options available for power conversion, but scaling wide bandgap power electronics is a manufacturing and integration challenge as much as a semiconductor challenge. Lower cost, credible reliability data, capable packaging, and a coordinated supply chain all influence commercial readiness. For industrial users, a disciplined application-level evaluation can help determine where these technologies offer a practical advantage—and what supporting engineering work is needed to realize it.