Wide-bandgap semiconductors are attracting attention in industrial automation because they can change how power-conversion equipment handles voltage, switching losses, heat and physical size. For engineers evaluating motor drives, power supplies or renewable-energy interfaces, the potential value is not simply a more efficient semiconductor. It is the possibility of redesigning the complete converter around different device characteristics.
Silicon carbide (SiC) and gallium nitride (GaN) are the principal wide-bandgap materials discussed in power electronics. The 2017 analysis summarized here identified SiC as the more mature option for many of the applications it examined, particularly where higher voltage and current handling were important. Adoption, however, depends on balancing device-level advantages against cost, reliability expectations and integration work.
What wide-bandgap semiconductors change in power conversion
Power semiconductors act as switches in circuits that convert and control electricity. Rectifiers change AC to DC, inverters convert DC to AC, and DC converters adjust voltage. These stages appear throughout industrial equipment, from variable-frequency drives (VFDs) to power supplies and grid-connected systems. Each conversion stage introduces losses, and losses can accumulate when equipment passes through several stages.
Compared with silicon, SiC and GaN have material properties that can support higher breakdown voltage and faster switching. SiC also has higher thermal conductivity than silicon, while GaN has higher electron mobility. Depending on device choice and circuit design, these characteristics can reduce switching losses and support higher operating temperatures. They can also allow smaller passive components and reduced cooling requirements, contributing to lower converter size and weight.
The practical results depend on the application and system design. The report describes silicon power electronics as commonly operating in an efficiency range of about 85% to 97%, and estimates that wide-bandgap designs can reduce conversion losses by half or more in some cases. It also cites efficiencies in the 95% to 99% range for wide-bandgap power electronics, depending on configuration and application. These figures should be treated as application-dependent comparisons, not a guaranteed improvement for every installation.
Why industrial motor drives are a significant opportunity
Motor drives stand out because motors account for substantial electricity use across industrial, commercial and residential settings. A VFD controls motor speed by adjusting the electrical supply, enabling a process to use a different operating speed when full speed is not required. The report identifies wide-bandgap integration into motor drives as having the largest potential energy impact among the application areas it assessed.
For industrial teams, that potential does not mean every existing drive should be replaced. The relevant opportunity is in the power-conversion stage, considered alongside the motor, load profile, operating conditions and system-level losses. A device with lower switching losses may help improve converter efficiency, but the actual benefit depends on how the complete drive is engineered and used.
The report’s estimate for possible 2025 primary-energy savings from motor-drive integration ranged from 150 to 410 petajoules. That range assumed full wide-bandgap penetration and varied with the share of motors equipped with drives. It is a modeled potential, not a measured result or a forecast for an individual plant. Its practical message is that application scale and adoption rate strongly influence the energy case.
Other applications across the industrial energy system
The analysis also considered data centers, renewable generation, rail traction, and hybrid and electric vehicles. In data centers, wide-bandgap devices may be used in uninterruptible power supplies and server power supplies. In solar and wind systems, inverters convert generated electricity for use or grid connection. Vehicle applications include traction drives, charging and DC-to-DC conversion.
These applications have different priorities. A compact, lighter converter may matter in a vehicle, while conversion efficiency and reliable operation are central considerations in an industrial drive or UPS. Renewable-energy installations also depend on the growth of generation capacity. Rail traction has a distinct constraint in the United States: the report’s assessment found its energy-saving potential limited by the relatively low level of rail electrification.
In its overall 2025 scenario, the report estimated that wide-bandgap use across the five application areas could save 1.1% to 2.2% of total U.S. electricity use, alongside a potential reduction in gasoline use associated with hybrid and plug-in hybrid vehicles. These figures represent a maximum modeled opportunity under the report’s assumptions, not guaranteed savings.
Integration barriers engineers and decision-makers should assess
Device price was a major obstacle in the report’s assessment. At the time, wide-bandgap devices were more expensive than silicon alternatives, while relatively low production volumes and a less mature market limited cost reductions. The report noted that system-level savings—such as reduced cooling or passive-component requirements—could offset some device-cost premiums, but that outcome depends on the specific design.
Reliability evidence and design requirements also matter. Wide-bandgap components are not necessarily drop-in replacements for silicon devices. Using their switching characteristics effectively may require changes to gate drives, packaging, passive components and electromagnetic-interference or short-circuit protection. Engineers must assess these elements together rather than compare semiconductor prices alone.
For procurement and engineering teams, an evaluation should therefore consider:
- Application requirements: voltage, current, operating temperature and switching needs.
- System-level economics: device cost alongside potential changes to cooling, passives, size and efficiency.
- Design and validation work: circuit, packaging and protection changes, plus evidence appropriate to the application’s reliability expectations.
- Adoption context: production availability and the maturity of the relevant device and supply chain.
Conclusion: evaluate the converter, not just the component
Wide-bandgap semiconductors offer industrial automation teams a potential route to lower-loss, higher-power-density conversion. Motor drives are a particularly important opportunity because of the scale of motor electricity use, while UPS systems and renewable-energy converters present additional use cases. The benefits are not automatic: cost, reliability evidence and application-specific redesign remain central considerations.
The most useful starting point is a system-level assessment of where power is converted, what losses occur and whether a wide-bandgap design can address them within the equipment’s technical and economic requirements. That approach helps decision-makers distinguish promising applications from cases where silicon remains the more suitable choice.