Access Official Technical PDF

Share Summary:LinkedInEmail

Wide-bandgap semiconductors are changing the design trade-offs available in power electronics. Silicon carbide (SiC) and gallium nitride (GaN) can support higher electric fields and operating frequencies than conventional silicon devices, creating opportunities to reduce switching losses and equipment size. For automation engineers and system integrators, the practical question is not simply whether these materials outperform silicon, but which technology best fits a system’s voltage, frequency, thermal and supply requirements.

Why wide-bandgap semiconductors matter

A semiconductor’s bandgap is the energy needed to move an electron from the valence band into the conduction band, where it can contribute to current flow. SiC and GaN have bandgap energies of about 3.26 electron volts (eV) and 3.39 eV, respectively, compared with about 1.12 eV for silicon. Their wider bandgaps are associated with higher breakdown fields, allowing devices to withstand greater electric fields before electrical breakdown.

These material characteristics can enable power devices with lower specific on-state resistance and lower input capacitance than comparable silicon switching devices. In an application, that can mean reduced conduction and switching losses. The potential system-level benefits include improved conversion efficiency and the possibility of smaller power components and less demanding heatsinking. Actual results depend on the device, circuit design and operating conditions; the material alone does not determine system performance.

Wide-bandgap devices also support higher-frequency switching. Increasing switching frequency can help reduce the size of associated equipment, but it makes component selection and thermal management more important. Engineers must assess the full power-conversion design rather than treat switching speed as an isolated advantage.

SiC vs GaN: choosing by application

SiC and GaN share many advantages over silicon, but they are not interchangeable. Their useful operating ranges and thermal characteristics lead them toward different roles in power conversion and RF systems.

SiC for high voltage and demanding temperatures

SiC power devices are commonly associated with higher-voltage applications, particularly designs above 1,200 V. The material’s comparatively strong thermal conductivity and ability to operate at high junction temperatures can be valuable in hot or demanding environments. Typical application areas discussed for SiC include inverters, motor drives, electric-vehicle powertrains and onboard chargers.

SiC devices can also be used in high-power switching and RF applications. Device architectures such as SiC MOSFETs and SiC MESFETs address different requirements, so selection should be based on the intended function rather than material name alone.

GaN for fast switching and lower-to-medium voltages

GaN is often considered for lower-to-medium-voltage power conversion, including applications below 1,200 V. Its switching characteristics make it attractive where high-frequency operation and power density are priorities. Potential application areas include power supplies, data-center equipment, consumer adapters, renewable-energy systems and automotive electronics.

GaN also has a role in RF power amplification. AlGaN/GaN heterojunction field-effect transistors are among the device types used in this area, while SiC-based MESFETs offer another approach. The choice depends on the required output power, frequency and device architecture.

What engineers should evaluate in a design

Choosing between silicon, SiC and GaN is a system-level decision. A useful evaluation starts with the electrical and operating requirements, then considers implementation and procurement constraints.

  • Voltage range: Identify the bus voltage and switching-device ratings required by the application. SiC is commonly used for higher-voltage designs, while GaN is frequently considered in lower-to-medium-voltage ranges.
  • Switching frequency and losses: Assess the impact of switching and conduction losses at the intended operating point. Faster switching may support more compact equipment, but the complete converter must be designed around it.
  • Thermal environment: Consider junction temperature, heat removal and the conditions in which the equipment will operate. SiC’s thermal properties can be advantageous in high-temperature applications.
  • Device and circuit design: Compare relevant device architectures and account for their electrical characteristics in the power stage. Gate charge, capacitance and reverse-recovery behavior can influence switching performance.
  • Availability and cost: Include material supply, manufacturing maturity and component availability in procurement planning. These factors can vary over time and should be verified for the specific design and sourcing window.

There can also be overlap between the application areas of SiC and GaN. Where both technologies appear viable, engineers should compare performance against the actual system requirements, including voltage, power, frequency and thermal limits. A material-level advantage does not automatically translate into a better overall solution.

Applications beyond conventional power conversion

Wide-bandgap devices are relevant to industrial automation wherever electrical power must be converted or controlled. Inverters, converters and motor drives are examples of systems where switching-device losses, operating temperature and equipment size can affect design decisions. SiC and GaN are also used in RF and microwave applications, where high-frequency and high-power requirements can challenge conventional silicon devices.

For plant and equipment teams, technology adoption also has practical implications for system integration. A change in switching technology can affect the design of the power stage and its thermal management. Evaluating a device therefore requires coordination between electrical design, equipment specifications and sourcing—not just a comparison of semiconductor data.

Conclusion: match the material to the system

SiC and GaN extend the options available beyond silicon by enabling power devices suited to higher electric fields, faster switching and, in SiC’s case, demanding thermal conditions. SiC is often a strong candidate for high-voltage and high-temperature systems; GaN is frequently considered when fast switching and lower-to-medium-voltage operation are priorities. For automation engineers and decision-makers, the practical path is to define the system requirements first, then compare device performance, thermal needs, circuit implications and availability. That approach helps identify where wide-bandgap technology can deliver a meaningful design benefit.

Access Official Technical PDF

About The Author