Understanding how a magnetic material reverses its magnetization requires more than knowing its coercive field. The path to switching—whether domains form gradually, walls move through the material, or the magnetization changes abruptly—can reveal the mechanisms that govern magnetic hysteresis. Widefield NV microscopy provides a way to observe those processes directly. Applied to few-layer vanadium triiodide (VI3), it shows abrupt magnetic reversal alongside a distinct, lower-field domain-wall depinning process.
Why image magnetization reversal in ultrathin magnets?
Two-dimensional van der Waals magnets can behave differently from their bulk counterparts. In particular, materials that are relatively soft magnets in bulk form can show hard-ferromagnetic behavior when reduced to a few atomic layers. A square-shaped hysteresis loop and a substantial coercive field may be measured, but those bulk-style measurements do not necessarily explain what is happening inside an individual, heterogeneous exfoliated flake.
Direct magnetic imaging helps close that gap. Rather than inferring reversal from a sample-wide measurement, researchers can track the magnetic state of individual flakes as an applied field changes. This makes it possible to distinguish the field needed to move existing domain walls from the field that initiates full magnetization reversal.
How widefield NV microscopy maps magnetic states
The method uses nitrogen-vacancy (NV) centers near the surface of a diamond substrate as magnetic sensors. The sample is placed on the diamond, and laser light excites the NV centers. Their photoluminescence is recorded while a microwave frequency is swept. Changes in the optically detected magnetic resonance signal reveal the magnetic field projected along the NV sensing axis.
With the sensing direction and the sample’s out-of-plane magnetization known, the measured field can be used to reconstruct a map of magnetization. In this study, the microscope provided sub-micron spatial resolution, allowing magnetic features across multiple micrometer-scale flakes to be compared. The samples were encapsulated in hexagonal boron nitride to limit degradation, and measurements were made at cryogenic temperatures.
The approach is useful for this class of material because it combines spatially resolved imaging with the ability to examine several small flakes in a field of view. It also makes the magnetic state visible as the field or temperature changes, rather than reducing the result to a single switching value.
What the VI3 measurements revealed
The measurements found magnetic signals in VI3 flakes down to two atomic layers. A monolayer signal was not detected in the samples examined, and some regions lacked a signal, which the researchers attributed to imperfect encapsulation or degradation during preparation. For the measured flakes, the Curie temperature was approximately 50 K. The observed areal magnetization increased roughly with layer count, although its estimated value was below the reported bulk value.
To examine reversal, the flakes were first magnetized in one direction and then exposed to pulses in the opposite direction. At 5 K, most flakes switched at fields of approximately 0.5–1 T. The transition was abrupt: contiguous regions changed magnetic orientation without a visible sequence of partially reversed states. The coercive field showed no clear relationship to thickness over the flakes studied, including a bilayer flake. As temperature approached the Curie temperature, coercivity decreased, while the reversal remained abrupt.
These observations are consistent with VI3 acting as a nucleation-type hard ferromagnet. In this interpretation, the field required to initiate reversal is limited largely by magnetic anisotropy and the nucleation of a domain wall. Once switching begins, the measured images do not show a gradual, progressive reversal across the same contiguous region.
Domain-wall depinning occurs below the switching field
The initial magnetization process provided a second, complementary view. Starting from a multidomain state after zero-field cooling, researchers applied increasing field pulses and imaged the resulting changes. Domain walls moved in discrete jumps as they depinned. At 5 K, the depinning fields were approximately 0.1–0.4 T—well below the fields associated with full switching.
The depinning field decreased with increasing flake thickness. The reported trend was consistent with defects such as cracks extending through one or a few atomic layers. Importantly, these defects did not appear to set the main switching field: their associated depinning fields were lower than the field needed for abrupt reversal.
This distinction matters when interpreting hysteresis. A low-field response can involve the movement of existing walls, while complete reversal can remain governed by the more demanding nucleation process. Measuring only the final switching point would miss that difference.
Implications for magnetic materials research
For engineers and technical decision-makers following nanoscale sensing, the broader takeaway is methodological rather than an immediate industrial performance claim. Widefield NV microscopy can provide spatially resolved, quantitative information about magnetic processes in small, heterogeneous samples. In VI3, it separates domain-wall depinning from the coercive switching event and links the latter to anisotropy-limited nucleation.
The same imaging strategy could support further investigation of van der Waals magnets and heterostructures, including studies of field- or current-driven domain-wall dynamics. Those possibilities are research directions, not demonstrated device capabilities in this work.
Conclusion
Widefield NV microscopy reveals that few-layer VI3 can remain ferromagnetic down to two atomic layers and switch abruptly at substantial coercive fields. Imaging the initial magnetization shows that domain-wall depinning occurs at lower fields and varies with thickness, while the main reversal is consistent with a nucleation-type mechanism. For magnetic materials research, the practical lesson is that spatially resolved measurements can distinguish processes that a coercive-field value alone cannot explain.