Access Official Technical PDF

Share Summary:LinkedInEmail

Wireless sensor systems are an important part of industrial automation because they can collect and communicate information close to the equipment or process being monitored. In Industry 4.0 applications, this can support production visibility, traceability and maintenance planning. But deploying a sensor node is not simply a matter of adding a radio: the hardware must fit its operating environment, integrate with relevant equipment and provide data in a useful form.

Work described by Fraunhofer IZM illustrates several ways these systems can be developed for industrial use, from tracking tools on assembly lines to monitoring electronic assemblies and testing sensor configurations on production machines. The common thread is system integration: sensing, processing, power and communications must be considered together.

Wireless sensor systems in industrial automation

Industrial applications often need more than a measurement. A useful system may need to acquire data, process it locally and make it available through a standard interface or network. This is particularly relevant when data is needed both by fixed control and management systems and by personnel using mobile devices during inspection, maintenance or repair.

Fraunhofer IZM’s industrial electronics work focuses on cyber-physical systems and autonomous radio sensors that can record and process relevant monitoring data at the point of use. Depending on the application, sensor nodes may also collect video data. The goal is to make information accessible where and when it is needed, rather than treating sensing as an isolated component choice.

That approach places practical constraints on design. A sensor system for an industrial environment must be appropriate for its intended use, including its form factor, communication approach, power requirements and integration into the surrounding equipment. A development process that addresses these factors early can help teams evaluate whether a proposed sensing concept is suitable for a real production scenario.

From tool tracking to process monitoring

Locating equipment on production and assembly lines

Knowing where tools and transport equipment are can help make production steps easier to track. In the NaLoSysPro research project, a miniaturized 24 GHz radar positioning system was investigated to determine the distance, angle and velocity of objects using signal time-of-flight measurement. The project combined an RF chip set and antenna integration on a thin-film multilayer module with a mobile transponder system.

This example highlights the importance of packaging and integration in industrial sensing. The radio-frequency components, antenna and transponder have to work together as a compact system. For engineers considering a similar application, the key question is not only which sensing principle to use, but how the complete module will be built and deployed in the intended environment.

Monitoring assemblies and manufacturing processes

In the PCB 4.0 project, networked miniaturized radio sensor nodes were used to investigate process monitoring and interconnection in microelectronics manufacturing. Potential scenarios included documenting the manufacturing history of a high-quality assembly in a forgery-proof manner, using integrated sensors to inform process control, and monitoring loads on an assembly during use to support preventive maintenance.

For these scenarios, data has value only when it can be linked to the relevant product or process and accessed by the systems and people that need it. The project equipped an automated SMT production line with distributed gateways to simulate different Industry 4.0 use cases. This connects sensor nodes with the wider production environment instead of leaving their measurements as isolated records.

Prototype quickly, but design for the application

Moving from a wireless sensing idea to an industrial test sample can be time-consuming. General-purpose sensor kits may not provide the form factor or robustness required for a particular use. To address this challenge, Fraunhofer IZM developed a modular, configurable sensor kit through a BMBF-funded project.

The kit allows hardware and software modules for sensing, communication and data processing to be combined. Different power-supply and communication concepts can therefore be implemented and tested with a range of sensors on production machines. For engineering teams, this kind of modular approach can make early evaluation more practical while preserving the need to assess the final configuration against its application requirements.

A prototype should answer specific questions, such as whether the selected sensor provides relevant information, whether communication is appropriate for the use case and how the node fits into the equipment or workflow. Successful concept testing does not remove the need to address reliability, integration and data handling in the eventual industrial design.

Design considerations for reliable deployment

The source material identifies reliability management, robust design and technology development as part of the support needed for industrial electronic systems. In practice, this means treating sensor deployment as a system-level engineering task rather than a radio-module installation.

  • Define the monitoring purpose: Identify which process, asset or assembly needs to be observed and what information users need.
  • Plan integration: Consider the sensor, antenna, electronics, packaging and mounting together, including how the node connects to gateways or other systems.
  • Match power and communications to the use case: Evaluate alternative concepts during prototyping rather than assuming one configuration will suit every sensor or machine.
  • Consider reliability: Assess the design in relation to its intended operating conditions and the consequences of missing or unreliable data.
  • Make data actionable: Determine how measurements will support process control, traceability, inspection or maintenance activities.

Fraunhofer IZM also describes reliability testing and technology transfer among its industrial electronics services. These activities help bridge the gap between an initial demonstrator and a system intended for use in production, where design decisions need to align with both the electronics and the operating context.

Conclusion: connect sensing to operational needs

Wireless sensor systems can support industrial automation by making equipment, processes and product histories more observable. Examples such as radar-based tool localization, networked sensor nodes for manufacturing monitoring and configurable kits for machine testing show the range of possible applications. They also point to a consistent engineering lesson: sensing, packaging, power, communication, reliability and data use must be planned as parts of one system.

For plant managers, operations leaders and automation engineers, the practical starting point is a clearly defined monitoring need. From there, teams can select an appropriate sensing approach, test the integration in a relevant scenario and establish how the resulting information will be used. This helps ensure that wireless monitoring contributes to a production objective rather than adding another disconnected source of data.

Access Official Technical PDF

About The Author