5G beam-steering antennas are important to network designs that must balance coverage, capacity and the practical constraints of deploying many radio sites. At mmWave frequencies, directional beams can help compensate for propagation loss and reduce interference, while electronic steering allows an antenna to adjust its beam without mechanical repositioning. The appropriate design depends on the link: backhaul, access and combined backhaul-access applications do not all require the same beamforming flexibility.
Why 5G networks need electronically steerable antennas
5G uses frequency ranges broadly grouped into sub-6 GHz and mmWave bands above 24 GHz. Sub-6 GHz overlaps with frequency ranges used by earlier mobile generations and can support wider-area coverage. Higher-frequency mmWave bands offer access to larger bandwidths, making them relevant to high-capacity deployments, particularly in dense urban networks.
These environments create different antenna requirements. A rural or less densely populated network may use larger cells, where one-dimensional steering, such as adjustment in azimuth, can be sufficient. In a dense urban network, small cells and high user demand increase the value of narrow, high-gain beams. Two-dimensional steering can direct beams in both azimuth and elevation, while multi-beam operation can support multiple users or links.
Electronically steerable antennas (ESAs) are also relevant to point-to-point links, where they can support initial alignment, compensate for antenna movement such as twist or sway, and accommodate network reconfiguration. For point-to-multipoint access links, steering can help maintain a connection to a moving user or align a fixed wireless access link between a base station and customer premises equipment.
Match the antenna architecture to the link
Point-to-point and point-to-multipoint
Point-to-point (PtP) links commonly connect network sites or provide backhaul and fronthaul. They generally call for high-gain, narrow beams. Point-to-multipoint (PtmP) links connect a base station to multiple users and typically need broader coverage or the ability to form multiple beams. In a self-backhaul or integrated backhaul-access design, an antenna may need to support both link types, increasing the importance of a flexible architecture.
Antenna size and configuration vary with the application. Base stations may use larger arrays, while user equipment can use smaller ones. At mmWave frequencies, higher-gain antenna solutions are often needed to address increased path loss. In dense deployments, beam direction, beamwidth and the number of simultaneous beams are therefore important design considerations.
Analogue, digital and hybrid beamforming
Three common approaches to mmWave array beamforming are analogue, digital and hybrid analogue/digital:
- Analogue beamforming uses one RF chain for the array and phase shifters at its antenna elements. It can provide a relatively simple, cost-conscious approach for applications such as single-beam PtP links. Its beamforming flexibility is more limited, and the available beam configurations depend on the implementation.
- Digital beamforming uses an RF chain for each antenna element. It offers extensive control over beam direction and shape, including the ability to form nulls, but the number of RF chains can make large mmWave arrays costly and power-intensive.
- Hybrid beamforming divides the array into sub-arrays. Each sub-array has an RF chain, while phase shifters provide analogue control within it. This reduces the RF-chain count compared with fully digital beamforming and can enable multi-beam operation, offering a balance between flexibility and hardware requirements.
Hybrid designs can support multi-user or MIMO operation, or combine sub-arrays to form a more directive beam. Their additional RF components can increase power consumption and cost compared with a simpler analogue system, so the benefits need to be assessed against the application’s capacity and coverage needs.
Phase-shifter technology and system trade-offs
One approach described for ESAs uses microwave liquid crystal (MLC) delay-line phase shifters. In this design, liquid-crystal phase shifters are fabricated using a standard LCD manufacturing process. The paper presents this technology as a way to reduce reliance on semiconductor-based phase shifters, while retaining electronic beam steering for mmWave applications.
The proposed antenna configurations differ by use case: fully analogue arrays are suited to single-beam PtP links, while hybrid analogue/digital arrays provide multi-beam capability for PtmP applications such as Massive MIMO base stations. In the hybrid configuration described, RF components such as the low-noise amplifier, power amplifier and transmit/receive switch are used per sub-array rather than per individual element. This arrangement is presented as a way to limit component count compared with the MMIC-based hybrid arrays discussed in the paper.
The paper reports example comparisons in which its MLC-based solution uses less power than cited silicon MMIC-based arrays, with the difference becoming more significant as array size increases. These figures are specific to the paper’s examples and assumptions; they should not be treated as universal values for every antenna design. For engineers evaluating options, the practical lesson is to compare complete system requirements—including array size, beam count, RF front-end architecture and target EIRP—rather than judging a phase shifter in isolation.
Designing for deployment at scale
In dense networks, antenna choices affect more than radio performance. The paper identifies small form factor, low weight, low power consumption and low cost as important requirements for antennas deployed in high numbers. Power use and heat dissipation can influence site-level design, while weight and size matter during installation and maintenance. Flat-panel ESAs may also suit applications where a conventional parabolic or lens antenna is less appropriate.
For system integrators and network planners, the selection process should begin with the link type and coverage objective. A single-beam backhaul link may favor a simpler analogue architecture. Access links that need multi-beam or multi-user capability may justify a hybrid design. The evaluation should then account for steering dimensions, beam requirements, RF-chain count, power budget, physical constraints and expected deployment scale.
Conclusion
5G beam-steering antennas support the directional links needed across diverse network roles, from point-to-point backhaul to point-to-multipoint access. Analogue, digital and hybrid beamforming each involve different balances of flexibility, component count, power and cost. MLC phase-shifter approaches offer another design option, particularly where large arrays or numerous deployments make system-level efficiency important. Matching the architecture to the link and assessing complete-array requirements are essential steps toward a practical 5G antenna deployment.