Access Official Technical PDF

Share Summary:LinkedInEmail

5G industrial automation is about more than faster wireless access. The technology’s potential combination of high data rates, low-latency communication and connections for many devices could support new ways for machines, control systems and services to exchange information. For plant leaders and system integrators, the practical question is how those capabilities may fit into a wider network strategy—and what infrastructure is required to deliver them.

At Samsung Electronics’ 2019 Investors Forum, the company described 5G as a platform for machine-to-machine communication and future services, including smart factories. Those ideas were presented as an emerging direction, not a guarantee that every application would immediately become practical. The network design, spectrum and deployment model all influence what a 5G system can provide.

What 5G could bring to industrial automation

Three characteristics commonly associated with 5G are higher speed, responsive communication and increased device connectivity. The forum presentation cited peak speeds of up to 20 Gbps as a 5G capability. Such figures describe a technology target, not a performance level that every site or device should expect. Actual results depend on the network and its operating conditions.

For industrial users, capacity matters when applications need to move large amounts of data. Responsiveness matters when devices must exchange information with minimal delay. Connectivity at scale matters as factories add sensors, machines and other connected equipment. Together, these capabilities could help enable applications that depend on coordinated communication between devices, rather than only interaction between a person and a machine.

The presentation connected this shift to the industrial IoT, artificial intelligence, cloud services and big data. A connected device can generate information; network connectivity can transport it; and software or AI-based systems can use it to inform an operation. 5G is one possible part of that chain, alongside the devices, applications and supporting infrastructure.

5G network architecture: rollout now and later

Early 5G deployments can use a non-standalone architecture, in which 5G operates alongside and depends on parts of an existing 4G network. This approach can make an initial rollout more practical because it builds on established infrastructure. However, it also means the network remains tied to some 4G capabilities and constraints.

A standalone 5G architecture operates independently of the 4G network. The forum presentation described this as a longer-term direction for enabling different services. For industrial decision-makers, the distinction is relevant when assessing a proposed deployment: the label “5G” alone does not explain how the network is built or which capabilities are available. Integrators and operators need to understand the architecture behind the service and how it aligns with the application’s requirements.

The presentation also discussed cloud-based network cores as a way for operators to make services more flexible. It described this shift as moving from dedicated infrastructure toward software-based systems intended to support new services. AI-based tools were also identified as a potential aid in managing the complexity of networks with many types of equipment. These are network-management considerations; they do not, by themselves, establish what a particular factory deployment can achieve.

Spectrum choices shape network design

5G can use different spectrum ranges, and each brings trade-offs. The forum highlighted low-band spectrum, mid-band around 3.5 GHz, and millimeter-wave spectrum in the 24–47 GHz range. The amount of spectrum available affects network capacity, while the frequency range influences how the network can be deployed.

Millimeter wave offers wide bandwidth and the potential for very high data rates. Its radio signals, however, have limited reach, making coverage a deployment challenge. The presentation therefore described 5G networks as potentially requiring a denser mix of sites, including large and small cells. Mid-band spectrum was also presented as an important option, while low-band spectrum offers less bandwidth in the examples discussed.

For a plant or industrial campus, these trade-offs make local conditions and application needs central to planning. A network intended to deliver high capacity across a defined area may require a different arrangement from one designed for broader coverage. Spectrum availability and the choice of network architecture should be considered together, rather than treating either as a standalone decision.

Small cells and integrated equipment

Adding more network sites can increase deployment complexity. The 2019 presentation emphasized compact radio equipment and chip integration as ways to reduce equipment size and power consumption and make installations easier. It also noted that installation and related services contribute to an operator’s capital costs, not just the price of the equipment itself.

These points are relevant to industrial environments where network infrastructure must be installed in suitable locations and maintained as part of site operations. However, compact equipment does not remove the need for careful planning. Coverage, capacity, backhaul and the placement of network components remain part of the system design.

Assessing 5G for a smart factory

5G should be evaluated as one component of an industrial connectivity strategy. Before committing to a use case, technical and operational teams can clarify:

  • Application needs: What data must move, how frequently must devices communicate, and what response characteristics are required?
  • Network architecture: Is the proposed service non-standalone or standalone, and what does that mean for the intended application?
  • Spectrum and coverage: Which spectrum bands are available, and what network density may be needed?
  • Supporting systems: How will connected devices, software, cloud services and AI-based tools work together?
  • Deployment effort: What equipment, installation and network operations will the solution require?

These questions help distinguish a broad technology vision from a deployable system design. They also keep attention on the operational problem being addressed, rather than on connectivity specifications in isolation.

Conclusion: connect capabilities to operational needs

5G could extend industrial connectivity through higher capacity, responsive communication and support for many connected devices. Its potential role in smart factories depends on more than radio performance: architecture, spectrum, network density, equipment and supporting software all matter. For automation engineers, integrators and plant decision-makers, the practical next step is to assess specific use cases against these design factors and determine whether a 5G deployment fits the site’s operational requirements.

Access Official Technical PDF

About The Author