Access Official Technical PDF

Share Summary:LinkedInEmail

A pipelined MIPS processor offers a practical way to increase instruction throughput by dividing instruction execution into stages that can operate concurrently. In an FPGA design, however, performance is not determined by clock frequency alone: pipeline balance, hazard handling, logic utilization and power all shape the result. A six-stage 32-bit MIPS RISC implementation on a Spartan-3E FPGA provides a case study in how these factors can be considered together.

Why use a pipeline in a processor design?

Without pipelining, a processor completes one instruction’s sequence of operations before beginning the next. Pipelining divides that sequence into smaller tasks, with registers between stages holding intermediate instructions or data. Once the pipeline is populated, different instructions can occupy different stages at the same time.

This overlap can improve throughput, but it does not make every individual instruction complete in less time. Instead, the design aims to let the processor begin and advance instructions more frequently. The stage boundaries also affect the critical path: a long or uneven stage can limit the clock period, while dividing work into stages can reduce the amount of combinational logic each stage must complete in one cycle.

How the six-stage pipelined MIPS processor works

The reported implementation organizes instruction processing into six functional stages. Pipeline registers buffer information between stages so that work can proceed concurrently, subject to dependencies and resource availability.

  1. Instruction fetch: Retrieves an instruction opcode from instruction memory. The program counter advances to the next address, described in the design as PC + 4.
  2. Instruction decode: Interprets the opcode and identifies the instruction’s operands and required operation.
  3. Register or operand read: Locates required values in the register bank or memory and determines the relevant operand information.
  4. Execute: Performs the instruction’s operation, including arithmetic and logic work in the ALU.
  5. Memory access: Handles data-memory operations, particularly the reads and writes associated with load and store instructions.
  6. Write back: Returns the result to the register bank and updates the processor state as required.

The design was coded in Verilog HDL and evaluated using Xilinx tools for the Spartan-3E XC3E1600E device. Its FPGA resources include configurable logic blocks, block RAM, input/output blocks and a Digital Clock Manager. These resources support implementation and clocking of the processor, while the pipeline’s registers preserve values as instructions move through the stages.

Managing pipeline hazards

Concurrent execution introduces hazards: situations in which an instruction cannot safely proceed in the next cycle. Handling them is essential to correct operation, and the chosen remedy can affect throughput.

Structural and data hazards

A structural hazard occurs when instructions need the same hardware resource at once. For example, a shared memory may be required for both instruction fetch and a data access. The design discussion identifies stalls and allocating or replicating resources as possible responses. Stalling is straightforward but adds cycles; additional resources can reduce contention but may increase implementation cost or complexity.

A data hazard arises when an instruction needs a result that an earlier instruction has not yet produced. A hazard unit can insert stalls, while a forwarding unit can send an available result directly to a later stage rather than waiting for it to be written back and read again. When forwarding cannot resolve a dependency, instruction reordering or a stall may be needed.

Control hazards

Branches create uncertainty about which instruction should be fetched next. One approach is to wait until the branch outcome is known; another is to predict an outcome and continue fetching. A wrong prediction can require discarding incorrectly fetched work. The design describes a two-bit branch and jump prediction unit, as well as compiler-level instruction scheduling as a way to place independent instructions around branches.

Power and timing considerations

The implementation applies fine-grained power gating to reduce leakage during inactive periods. It also uses a low-leakage ALU and low-power pipeline-register techniques. These are design measures intended to address power consumption; pipelining itself should not be treated as an automatic power-saving technique. As the paper notes, adding pipeline registers reduces critical-path delay, while the resulting clocking and hardware requirements must also be considered.

Stage balance is another important factor. If one stage requires substantially more time than the others, it can constrain the pipeline’s operating period. The design discusses deeper pipelining as a way to divide work further, but more stages also make the organization and management of instruction flow more involved.

Reported FPGA results and what they indicate

For the Spartan-3E implementation, the paper reports a total power figure of 0.129 W, a path delay of 11.180 ns, utilization of 421 LUTs and an operating frequency of 285.583 MHz. Its comparison table lists 90 nm process technology for the proposed model and compares it with other processor implementations using different FPGA families and process technologies.

These results describe the evaluated design and device; they should not be read as a general performance guarantee for other FPGA platforms or processor workloads. Comparisons are most useful when their implementation context and measurement conditions are understood. The paper also reports power across multiple test frequencies and separates leakage and dynamic power in its stage-level analysis.

Practical implications

For engineers evaluating FPGA-based processor architectures, this design illustrates the need to assess throughput, timing, power and resource utilization together. A six-stage pipeline can overlap instruction work, but its practical effectiveness depends on balanced stages, adequate resources and correct handling of structural, data and control hazards. The reported Spartan-3E figures offer a specific reference point—not a substitute for evaluating the target device and design conditions. The broader lesson is to treat pipeline architecture, hazard controls and power techniques as connected decisions when developing an embedded processor design.

Access Official Technical PDF

About The Author