Access Official Technical PDF

Share Summary:LinkedInEmail

A change to a semiconductor die attach epoxy can matter to design, quality, procurement and production teams, even when electrical specifications remain unchanged. ON Semiconductor’s Final Product/Process Change Notification FPCN22523ZA, issued on 30 May 2019, describes the qualification of Ablestik 8900NC as a replacement for Hitachi EN4370K3 in selected devices. The transition followed the current material’s end of life at its supplier. For engineers and operations teams, the notice provides details on scope, reliability testing, traceability and planned order dates.

Why the die attach epoxy is changing

The change applies to the assembly process: the non-conductive epoxy used to attach the die. Under the notice, Hitachi EN4370K3 is replaced by non-conductive Ablestik 8900NC. ON Semiconductor identified two reasons: the supplier was ending the existing material, and the replacement is antimony-free. The notification reports that the current epoxy contained antimony at 12,000 mm/kg.

This is a material substitution rather than a change to the stated electrical characteristics or product marking. The notice says there is no change to testing, and it identifies no anticipated impact on fit, form, function, reliability, product safety or manufacturability. The devices were qualified and validated against the same product specification.

Which devices and packages are affected?

The change notification lists devices assembled in TSOP5, TSOP6, US8, SC82 and SOT23A packages. The standard part numbers identified in the notice include NLVVHC1G00DTT1G, NLVVHC1G14DTT1G and NLV7SB3257DTT1G. The qualification vehicles listed are NCV551SN30T1G and NLV7SB3257DTT1G.

The notice also explains that its standard parts list may not include every affected custom part. Customer-specific products are addressed through a PCN addendum or the supplier’s customer-specific portal. Teams managing configured or custom devices therefore need to check the relevant customer notification rather than relying only on the public standard-part list.

Reliability qualification results

ON Semiconductor reported reliability qualification data for two devices. For NCV551SN30T1G in TSOP5, the summary records zero failures in the reported sample counts for the listed tests:

  • HTSL: JESD22-A103 at 150°C for 1,008 hours; 0/231.
  • TC: JESD22-A104 from -55°C to +150°C for 1,000 cycles; 0/231.
  • PTC: JESD22-A105 from -40°C to +125°C for 1,000 cycles; 0/231.
  • HAST: JESD22-A110 at 130°C, 85% relative humidity and 18.8 psig with bias for 96 hours; 0/231.
  • uHAST: JESD22-A118 at the same temperature, humidity and pressure without bias for 96 hours; 0/231.
  • PC: J-STD-020/JESD-A113 at MSL 1 and 260°C; 0/924.
  • RSH: JESD22-B106 at 265°C for 10 seconds; 0/90.

For NLV7SB3257DTT1G in SC82, the summary reports 0/231 for temperature cycling (JESD22-A104, -65°C to +150°C, 1,000 cycles) and 0/231 for PC testing (J-STD-020/JESD-A113, MSL 1 at 260°C). These are the results and conditions stated in the notification; teams assessing applicability should consult the complete PCN and any relevant customer-specific documentation.

Production planning and traceability

The notification set out a transition schedule in 2019 and 2020. Sample and PPAP availability were listed as 1 May 2019. Customers were asked to submit sample requests within 45 days of publication. The proposed first ship date for the changed material was 30 May 2020. The current-material last order date was 1 May 2020, and the listed last delivery date was 18 May 2020. The notice cautioned that the last delivery date could change according to production and depletion of existing inventory.

It also stated that orders received after the last-order date would be treated as orders for the changed material. Orders for unchanged material after that date depended on mutual agreement and available inventory. These dates are the historical schedule in the 2019 notification, not a current ordering timeline.

For identification, assemblies using the new material are identified by date code 2013 or newer, according to the notice. Product marking does not otherwise change. This distinction is useful for receiving inspection and traceability: the device marking remains the same, while the date code provides the stated means of identifying assemblies made with the replacement material.

What engineering and operations teams should take away

This PCN illustrates why a material change should be reviewed across both technical and operational functions. Engineering and quality teams can confirm the affected part numbers, package types, qualification evidence and applicable product specifications. Procurement and planning teams can align orders with the transition dates and verify whether any custom parts require a separate addendum. Manufacturing and incoming-quality teams can use the documented date-code information when tracking material through production and inventory.

For this specific change, ON Semiconductor reported no electrical-characteristic impact, no test change and no anticipated impact to the listed product attributes. The practical response is to maintain the PCN with device records, confirm that affected part numbers are covered, and use the stated traceability and customer-specific channels when managing the transition. That provides a clear basis for controlling an assembly-material substitution without treating it as an undocumented change to the device specification.

Access Official Technical PDF

About The Author