Semiconductor package dimensions are a practical design input, not just a mechanical detail. They affect component placement, board layout, assembly planning and whether a replacement part can fit an existing design. A Hitachi datasheet excerpt documents three 16-pin package options—DP-16, FP-16DA and FP-16DN—with different outlines and lead measurements. It also cautions that product specifications can change, making revision checks essential before design or purchasing decisions.
What the Hitachi package drawings document
The drawings provide mechanical information in millimetres for three packages. Each is identified as a 16-pin package, with pins numbered 1 through 16 in the illustrations. The listed reference weights and standards information differ by package:
- DP-16: Hitachi code DP-16; JEDEC and EIAJ conformity are indicated; reference weight is 1.07 g.
- FP-16DA: Hitachi code FP-16DA; EIAJ conformity is indicated, while no JEDEC designation is shown; reference weight is 0.24 g.
- FP-16DN: Hitachi code FP-16DN; JEDEC and EIAJ conformity are indicated; reference weight is 0.15 g.
These identifiers and reference values help distinguish the drawings, but they do not establish that the packages are interchangeable. A shared pin count does not mean the body outline, lead spacing, terminal geometry or board footprint is the same.
Reading semiconductor package dimensions for board design
When reviewing a package drawing, separate the measurements into groups rather than treating the outline as one overall size. Check the body dimensions, the spacing between leads, lead width and thickness, and the position of the leads relative to the package body. Also note maximum dimensions, tolerances and any stated minimums. These details describe different physical limits and should be interpreted as shown, not replaced with a single nominal measurement.
For example, the DP-16 drawing gives a 2.54 ± 0.25 mm dimension and shows a 7.62 mm spacing, along with body and lead measurements. The FP-16DA drawing identifies a 1.27 mm dimension and marks some measurements as including plating thickness, with separate base-material dimensions. FP-16DN also includes 1.27 mm and 0.635 mm measurements, as well as plated and base-material dimensions. Those distinctions matter when translating the drawing into a land pattern or comparing a candidate component with an existing board.
The diagrams also include angular limits for lead position: 0°–15° for DP-16 and 0°–8° for both FP-16 variants. Where a drawing marks a dimension with an asterisk, its note should be read alongside the value. In FP-16DA and FP-16DN, the asterisk identifies dimensions that include plating thickness; the drawings separately provide base-material dimensions. Ignoring that note can lead to an inaccurate interpretation of the terminal measurements.
Comparing DP-16, FP-16DA and FP-16DN
The three options differ in more than their names. DP-16 has a listed maximum body dimension of 20.00 mm and a reference weight of 1.07 g. FP-16DA lists a 10.5 mm maximum dimension and a 0.24 g reference weight. FP-16DN lists a 10.3 mm maximum dimension and a 0.15 g reference weight. These figures describe particular dimensions and reference weights in the drawings; they should not be treated as a complete comparison of package suitability.
For engineering review, compare the full drawing for the exact package code under consideration. Confirm pin numbering and orientation, overall outline, lead pitch, terminal dimensions and tolerances. If creating or checking a PCB footprint, use the applicable component and board-design requirements rather than assuming that a package code or pin count alone defines the footprint. The excerpt provides mechanical drawings, but does not supply electrical characteristics or identify a specific semiconductor device, so those details must be obtained from the relevant device documentation.
Specification control and application risk
The datasheet’s cautions are directly relevant to component selection and lifecycle management. Hitachi states that products and specifications may change without notice and advises users to confirm they have the latest product standards or specifications before final design, purchase or use. A drawing in an older document should therefore be treated as a reference requiring verification, not automatically as the current manufacturing specification.
The document also instructs designers to keep the product within its guaranteed operating ranges, including maximum ratings, supply voltage, heat-radiation characteristics and installation conditions. It places responsibility on the application designer to consider foreseeable semiconductor failure modes and use system-level safeguards where needed to reduce the risk of injury, fire or consequential damage. The product is explicitly identified as not radiation resistant. For applications requiring especially high reliability—or where failure could threaten life or cause injury—the notice advises contacting Hitachi before use.
Practical checks before design or procurement
- Match the complete package code. Do not use pin count alone to select a mechanical footprint.
- Verify the latest documentation. Confirm the current product specification and package drawing before committing to a design or order.
- Review every critical dimension. Check body outline, lead spacing, terminal size, tolerances and drawing notes about plating.
- Confirm application limits. Review electrical, thermal and installation conditions in the complete device specification.
- Plan for system-level safety. Consider relevant failure modes and safeguards, particularly in applications with serious consequences.
Conclusion
The DP-16, FP-16DA and FP-16DN drawings illustrate why semiconductor package dimensions need careful, code-specific review. Their 16-pin configurations do not make them mechanically identical, and details such as tolerances and plating notes can affect footprint interpretation. For automation engineers, integrators and procurement teams, the practical approach is to verify the exact package against current documentation, confirm the full device’s operating requirements and account for system-level risk before releasing a design or purchase.