The FQD4P25TM-WS MOSFET is a P-channel enhancement-mode power device rated for a -250 V drain-to-source voltage and continuous drain current up to -3.1 A under specified conditions. For engineers assessing a switching stage, DC motor control circuit, or other power-electronics design, its ratings provide a starting point—not a substitute for checking operating conditions, thermal limits, and transient behavior in the application.
Produced using planar stripe and DMOS technology, the device is designed for low on-state resistance and switching performance. Its listed applications include switched-mode power supplies, audio amplifiers, DC motor control, and variable-switching power applications. It is supplied in a three-lead D-PAK package.
FQD4P25TM-WS MOSFET: key electrical ratings
The negative voltage and current values in the specifications reflect the polarity convention for a P-channel device. The main ratings and test conditions should be read together: a headline current value does not mean the device can carry that current in every thermal environment or circuit configuration.
- Drain-source breakdown voltage: -250 V minimum, measured with the gate-source voltage at 0 V and drain current at -250 µA.
- Continuous drain current: -3.1 A at a case temperature of 25°C, reducing to -1.96 A at a case temperature of 100°C.
- Pulsed drain current: -12.4 A, subject to the datasheet’s pulse and maximum-junction-temperature limitations.
- Gate-source voltage: ±30 V absolute maximum.
- On-resistance: 1.63 Ω typical and 2.1 Ω maximum at VGS = -10 V and ID = -1.55 A.
On-resistance is specified at a particular gate voltage and drain current. Designers should use the conditions relevant to their circuit and account for how operating temperature affects conduction losses. The datasheet includes a typical on-resistance-versus-temperature graph, but application validation remains necessary.
Thermal resistance and power dissipation
Thermal management is a central design consideration for a power MOSFET. The FQD4P25TM-WS lists a maximum junction-to-case thermal resistance of 2.78°C/W. Junction-to-ambient thermal resistance is listed as 110°C/W with a minimum 2-ounce copper pad and 50°C/W with a 1 in² pad of 2-ounce copper. These values show why the mounting and board copper conditions matter: the device’s ability to shed heat depends on the thermal path beyond the component itself.
The datasheet gives power dissipation ratings of 2.5 W at an ambient temperature of 25°C and 45 W at a case temperature of 25°C, with a derating value of 0.36 W/°C above 25°C. These figures use different reference conditions and should not be treated as interchangeable. In practice, engineers need to estimate device losses and junction temperature using the relevant board, case, ambient, and operating conditions.
For time-varying loads, the document also provides a transient junction-to-case thermal response curve. It relates pulse duration and duty factor to thermal response, supporting analysis of pulsed operation. The current rating for pulsed use is explicitly limited by pulse width and maximum junction temperature.
Switching, gate charge, and avalanche behavior
Switching performance depends on the circuit as well as the MOSFET. Under the datasheet’s stated switching test conditions—VDD = -125 V, ID = -4.0 A, and gate resistance of 25 Ω—the typical turn-on delay is 9.5 ns and the typical rise time is 60 ns. Typical turn-off delay and fall time are 14 ns and 27 ns, respectively. These are test results, not guaranteed timing values for every gate drive or load.
Total gate charge is 10.3 nC typical and 14 nC maximum under the listed test conditions of VDS = -200 V, ID = -4.0 A, and VGS = -10 V. Typical input capacitance is 325 pF, while reverse transfer capacitance is 10 pF. Gate charge and capacitance are useful when evaluating drive requirements and switching transitions, but actual behavior depends on the operating point and surrounding circuit.
The device is 100% avalanche tested. Its single-pulse avalanche energy rating is 280 mJ under the specific conditions stated in the datasheet, while repetitive avalanche energy is listed as 4.5 mJ. Avalanche ratings apply to defined test conditions; they should not be interpreted as permission to ignore inductive energy management or transient limits in a design.
Body diode, package, and application checks
The MOSFET’s drain-source diode has a maximum continuous forward-current rating of -3.1 A and a maximum pulsed rating of -12.4 A. The listed maximum forward voltage is -5.0 V at a diode current of -3.1 A. Typical reverse-recovery time is 140 ns, with a typical reverse-recovery charge of 0.64 µC under the stated test conditions. These characteristics are relevant when the body diode conducts during switching or other circuit states.
Before selecting the D-PAK device, verify voltage and current margins, gate-drive polarity and amplitude, junction-temperature limits, and thermal layout. Also assess switching and diode behavior under the intended load conditions. The datasheet specifies an operating and storage temperature range of -55°C to +150°C and notes that actual performance can vary by application.
Conclusion
The FQD4P25TM-WS combines a -250 V breakdown rating, a 2.1 Ω maximum on-resistance under specified conditions, and published switching, thermal, and avalanche data. For automation-related power circuits such as DC motor controls and switching supplies, the practical selection task is to match those specifications to the real operating point. Pay particular attention to board-dependent heat dissipation, gate-drive conditions, pulse limits, and transient energy so the design stays within the device’s stated ratings.