CVD diamond detectors offer a solid-state option for applications that need to measure radiation, monitor particle beams or detect deep ultraviolet light. Their combination of low dark current, fast charge collection and resistance to demanding environments makes them relevant to high-energy physics, civil nuclear work, medical therapy, synchrotrons and cyclotrons. Selecting a detector involves more than choosing a diamond chip: material grade, dimensions, electrode geometry and packaging all affect how the sensor can be integrated into a system.
Why use CVD diamond detectors?
Several properties of diamond contribute to its use as a detector material. Its wide band gap supports operation at room temperature and at elevated temperatures, while the material’s dark current is typically at the picoampere level. Its very high resistivity, specified as 1013 to 1016 Ω·cm, is another relevant characteristic for detector operation.
Diamond also has high electron and hole mobility. In a detector, mobile charge carriers contribute to the electrical signal generated when energy is deposited in the material. High mobility supports fast signal collection and a fast rise time. The detector is described as a solid-state ionisation chamber, with low capacitance, typically at the picofarad level, and low dark current, typically at the picoampere level.
Other material properties broaden the range of potential operating environments. Diamond is radiation hard and chemically inert, supporting use in highly radiative or otherwise hostile conditions. Its low atomic number (Z) and tissue-equivalent characteristics are pertinent to applications such as medical dosimetry. Diamond is also naturally sensitive to ultraviolet light and is described as solar blind, with deep-UV use specified below 225 nm.
Material grade, size and thickness
CVD diamond is available in polycrystalline (PC) and single-crystal (SC) forms. The appropriate form and quality depend on the measurement requirements. Electronic-grade (EL) material has the lowest achievable concentrations of nitrogen and boron impurities and is intended for applications including spectroscopy. Standard-grade (STD) material contains more nitrogen, at the parts-per-million level, and may suit specific applications; the listed standard-grade option is single-crystal diamond.
Available dimensions and thicknesses vary by crystal form and grade. General offerings include SC chips from 2 × 2 mm to 4.5 × 4.5 mm and PC chips from 2 × 2 mm to 10 × 10 mm, with other dimensions available on request. Standard thicknesses are listed as 50 to 500 µm, although grade-specific offerings can differ. For example, the specifications list some single-crystal and polycrystalline electronic-grade formats at 100 to 500 µm, while certain standard-grade single-crystal formats extend from 100 µm to 1.2 mm.
These ranges are not a single universal specification: availability depends on the selected material and format. Confirming current options with the supplier is important when establishing a sensor design. Other thicknesses may also be available on request.
Matching sensor design to the measurement
Electrode geometry provides a way to adapt the detector to the required sensing task. Common designs include:
- Single-window sensors: A square or circular contact arrangement for a single sensing area.
- Quadrant sensors: Square or circular layouts divided into quadrants.
- Strip sensors: Orthogonal strips on opposite sides can form an X-Y sensor; interdigitated strips can be used for a surface sensor.
- Pixel sensors: Arrays of square pixels, with different sizes available.
- Position-sensitive sensors: Two strips on each side over a thin conductive layer can provide an X-Y sensor with position resolution.
- Thick-thin designs: An electrode is made thinner than the bonding pad.
Contact materials and geometries can be selected for the application. Listed contact materials include aluminium, titanium, nickel, gold and silver, among others. Because the contact configuration is application-dependent, sensor requirements should be defined alongside the readout and mounting needs rather than treated as a later packaging detail.
Packaging and system integration
Diamond detectors can be supplied as chips or assembled into standard or custom packages. Package materials include 96% alumina ceramic, used for ultra-high-vacuum environments, and FR4. Some packages use gold-free contacts and can be supplied as transmission packages with a custom-diameter through-hole.
Case options include aluminium, either bare or gold-plated. A small SMA connector is identified as the preferred option where space is limited; TNC and BNC coaxial or triaxial connectors are also available on request. FR4 and ceramic boards come in various shapes and sizes, and package designs can be developed to house one or more sensors.
For system integrators, these choices make mechanical and electrical interfaces part of the detector selection process. Consider the available installation space, the required connector type, the operating environment and whether the design needs a single sensor or several. Confirming those needs early can help align the electrode layout, package and connection method.
Applications and practical selection
Applications listed for CVD diamond detectors include high-energy physics beam positioning and monitoring, civil nuclear applications in medical and oil and gas settings, medical therapy and dosimetry, synchrotrons, cyclotrons, deep-UV detection below 225 nm, and fast and thermal neutron detection. The detector’s combination of radiation hardness, fast charge collection and low dark current is relevant to these varied measurement contexts, but the specific sensor design must suit the intended use.
When specifying a detector, technical teams should establish the target measurement, operating environment, required sensing area and thickness, and any constraints on contacts, mounting or connectors. They should also distinguish between material grades and verify that the desired size and thickness are available in the chosen form.
Conclusion
CVD diamond detectors provide a flexible solid-state platform for radiation and UV measurement, with material properties that support fast signal collection, low dark current and use in demanding environments. Their practical suitability depends on matching crystal form and grade to the application, then coordinating dimensions, electrode design and packaging with the system requirements. Careful specification of these details gives engineers and integrators a clearer path from detector selection to installation.