Connected services, advanced driver assistance systems (ADAS) and vehicle automation are changing the demands placed on automotive gateway architecture. Gateways must move growing volumes of data between vehicle domains while supporting secure communications, low-latency processing and a mix of traditional and high-speed network interfaces. For engineers and system architects, these shifts affect processor selection, network design, safety planning and the way software is developed across vehicle platforms.
What an automotive gateway does
An automotive gateway transfers data between electronic control units (ECUs) and vehicle networks. A vehicle may use a centralized gateway, multiple domain gateways, or both. The centralized gateway connects different domains, such as the powertrain, body electronics, infotainment, chassis and safety, ADAS, and telematics control unit (TCU). A domain gateway, also called a domain controller, routes data among ECUs within its own domain.
Because it connects a broader range of systems, a centralized gateway typically needs more processing capability, interfaces and network bandwidth than a domain gateway. The distinction matters when defining system requirements: the gateway must handle the traffic and functions assigned to its position in the vehicle architecture, rather than treating all gateway nodes as equivalent.
Why automotive gateway architecture is changing
Vehicle functions increasingly depend on data moving between systems and beyond the vehicle. Connectivity supports services such as emergency calling, online content, remote vehicle access, vehicle tracking, fleet management, car sharing and over-the-air (OTA) software updates. Telematics also enables communication with external systems, including cloud services. Vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I) and vehicle-to-pedestrian (V2P) communication add further data paths, using connectivity technologies such as dedicated short-range communication (DSRC) or cellular vehicle-to-everything (C-V2X).
These functions add to the processing and communication burden on vehicle networks. Data may need to be validated, decrypted and routed to the appropriate gateway or domain ECU. As the number of connected and automated functions grows, the gateway must support the required throughput without overlooking security, safety or timing requirements.
From traditional bus networks to higher bandwidth
Earlier gateway designs commonly relied on 32-bit microcontrollers (MCUs) with embedded flash and interfaces such as Controller Area Network (CAN), Local Interconnect Network (LIN) and FlexRay. These networks remain relevant for many automotive functions. However, CAN and LIN are not designed to carry large data volumes at low latency. CAN Flexible Data Rate (CAN-FD) extends CAN capabilities, but higher-bandwidth data movement is also driving a shift toward Ethernet-based networks.
Ethernet using the TCP/IP protocol offers a familiar approach to moving higher volumes of data between vehicle domains. In this architecture, gateways need suitable Ethernet connectivity as well as enough compute performance to process and route network traffic. Application processors can supplement or replace some MCU functions where the processing requirements exceed what an MCU-based design can support. This does not remove the need for real-time control: gateway designs may combine application processing with MCU subsystems for time-sensitive tasks.
Designing the TCU for changing connectivity
The TCU connects the vehicle to external networks and services. It may use cellular or Wi-Fi connectivity, alongside interfaces for internal vehicle networks. A typical data path begins with information arriving through a modem. The processor handles tasks such as decrypting and validating the data, then routes it to the gateway or a destination ECU.
Separating the modem from the processor can help an architecture adapt as modem standards evolve. Instead of changing the processor and its associated software when adopting a new modem standard, the vehicle design can replace the modem while retaining the processor platform. This separation can support flexibility over a vehicle program’s life, while requiring careful definition of the interfaces between the components.
Addressing safety and security in the gateway
Greater connectivity increases the importance of protecting vehicle communications and software. A dedicated security processor or subsystem can help protect access to security keys, strengthen communication channels and support trusted software updates. Secure boot and runtime security capabilities are also relevant considerations when selecting an SoC for security-sensitive applications.
Functional safety is a separate but related design concern. Safety functions have typically been implemented using discrete MCUs certified for the required safety level. An SoC that integrates application processing with a safety MCU may provide another way to meet system needs and reduce the number of external components. The appropriate approach depends on the vehicle’s safety requirements and system design; integration does not remove the need to validate the complete application.
Scaling platforms across vehicle programs
Gateway and TCU complexity can increase development effort, particularly when vehicle models or tiers use different hardware and software configurations. A scalable processor family with compatible software across devices can help OEMs and Tier 1 suppliers reuse development work and adapt processing and peripheral choices to different system needs.
For example, the Texas Instruments Jacinto DRA82x family described for gateway, TCU and vehicle compute applications combines application-processing cores, real-time processing resources and automotive interfaces. The stated peripherals include PCIe, USB 3.x, Gigabit Ethernet, CAN-FD and LIN, alongside an integrated MCU subsystem and a High Security Module. The DRA82x family includes DRA829V and DRA821 devices, with differences in available processing and peripheral configurations. Processor selection should therefore be based on the specific system requirements rather than assuming every device offers an identical configuration.
Compatible software development kits and operating-system support can also help teams reuse software across a product lineup. Shared software foundations may reduce the need to repeat development work for each vehicle tier, while allowing hardware configurations to scale to different gateway and vehicle compute requirements.
Practical implications for engineering teams
When evaluating a next-generation gateway or TCU, engineering teams should consider the complete data path and its operating requirements. Key questions include:
- Which vehicle domains and ECUs must communicate through the gateway?
- What mix of CAN, LIN, CAN-FD, Ethernet and other high-speed interfaces is required?
- Which functions need application-level compute, and which require real-time processing?
- How will modem updates, secure communications and trusted software updates be handled?
- Can hardware and software choices scale across vehicle models without duplicating development effort?
Automotive gateway architecture is moving toward higher processing capacity, faster networking and more deliberate integration of connectivity, security and safety functions. For system designers, the practical goal is to match those capabilities to the vehicle’s data flows and functional requirements. A well-planned combination of application processing, real-time resources, appropriate interfaces and reusable software can provide a foundation for evolving gateway and telematics systems.