Microdroplet nucleation can emerge as a multicomponent liquid dissolves, without mechanical mixing or another external energy input. In a model system of water–ethanol drops dissolving in anethole oil, mass transfer changes local composition and miscibility. The resulting spontaneous emulsification occurs both in the surrounding oil and inside the aqueous drop, while fluid motion helps determine where droplets appear and how they move.
These coupled effects matter when interpreting liquid-liquid mass transfer and spontaneous emulsion formation. The findings connect diffusion and thermodynamic phase behavior with solutal Marangoni flow and buoyancy-driven convection—processes relevant to multiphase systems and liquid-liquid microextraction.
How dissolution changes local phase behavior
The drop contains water and ethanol, while the surrounding host liquid is anethole oil. Ethanol is miscible with the oil, but water is not. As ethanol leaves the drop and enters the host liquid, the compositions on both sides of the interface evolve. Because the three components do not mix ideally, a change in their relative concentrations can move a local mixture into a region where it separates into two liquid phases.
In an ouzo-type system, a liquid can remain mixed at one composition but become supersaturated in oil as the water fraction rises. A dispersed liquid phase then forms spontaneously as microdroplets. In the dissolving-drop system, diffusion creates these local composition changes: it transports species across and away from the interface, rather than relying on bulk mixing to set the composition uniformly.
Two forms of microdroplet nucleation
The experiments reveal two distinct emulsification events. First, water microdroplets form in the oil-rich host liquid near the drop interface. This water-in-oil event appears within seconds for drops with higher initial ethanol content; at intermediate composition, it is not observed in every trial. The suspended droplets later disappear as the surrounding composition changes.
Oil microdroplets also form inside the aqueous drop, near its mid-height or equatorial region. This oil-in-water nucleation occurs across the tested initial ethanol concentrations, although its onset time varies with composition. The initial appearance of droplets is not the end of the process: their subsequent movement helps organize them into two rings, one above and one below the drop’s equatorial plane.
The two outcomes reflect the composition gradients on opposite sides of the interface. In one region, water-rich liquid becomes dispersed in oil; in the other, oil-rich liquid becomes dispersed in the aqueous phase. The location and timing therefore depend not only on the starting recipe, but also on how each component diffuses and how the local phase equilibrium responds.
Why fluid motion matters alongside diffusion
A diffusion-only description helps explain how concentration profiles develop, but it does not capture the full observed behavior. Concentration differences can alter interfacial tension, creating a surface-tension gradient along the drop boundary. The resulting solutal Marangoni stresses drive circulation inside the drop. The two circulation rolls transport newly formed oil microdroplets and concentrate them around the centers of the rolls, producing the observed rings. When ethanol has largely dissolved, the Marangoni motion subsides and the rings break apart.
Outside the drop, buoyancy-driven natural convection influences transport in the host liquid. Ethanol-rich fluid released from the drop forms plumes that rise, and external flow can carry suspended water microdroplets away from their nucleation region. The study’s scale analysis and flow measurements indicate that the dominant flow mechanism differs by region: Marangoni motion shapes flow inside the drop, while natural convection is important in the surrounding oil.
This distinction is practically significant. A concentration field may indicate where a mixture could become unstable, but advection can redistribute material and affect whether, where and how long that condition persists. In other words, diffusion establishes the local compositional pathway; flow helps shape the resulting emulsion dynamics.
Using phase equilibrium to predict emulsification
The proposed model combines a one-dimensional, multicomponent diffusion calculation with thermodynamic equilibrium at the moving interface. The interface compositions are constrained by equality of chemical potentials in the two liquid phases, with an activity-coefficient model used to account for non-ideal mixture behavior. The model then calculates how water, ethanol and oil concentrations vary near the interface over time.
To assess whether microdroplets are expected, the calculated composition path can be compared with the mixture’s phase-separation boundary, or binodal. If the path crosses that boundary, the local composition enters a two-phase region, providing a thermodynamic basis for diffusion-triggered emulsification. This approach links mass-transfer kinetics to phase behavior instead of treating nucleation as an isolated event.
The model simplifies the physical system: it assumes rapid interfacial equilibrium and treats transport as one-dimensional diffusion. It therefore provides insight into the composition-driven trigger, while the experimental observations and flow analysis show why convection must also be considered when explaining the complete behavior.
Practical implications for multiphase processes
For engineers and technical decision-makers working with liquid-liquid separation or extraction, the central lesson is that component solubility, mixture phase behavior and fluid motion are coupled. A drop can retain a distinct interface even as its constituents transfer at different rates. Local composition may cross a phase boundary before the overall system appears to have changed substantially, creating dispersed droplets in either phase.
- Composition matters: Initial component ratios affect whether water-in-oil nucleation occurs and influence the timing of oil-in-water nucleation.
- Location matters: Droplets form preferentially in specific regions rather than uniformly throughout the system.
- Flow matters: Marangoni circulation and buoyancy-driven convection transport droplets and alter local mass transfer.
- Equilibrium matters: Phase diagrams and interfacial thermodynamics help identify when diffusion may drive a mixture into a phase-separated state.
For process analysis, considering diffusion alone may therefore miss important features of emulsion formation and transport. A more complete picture combines component-specific mass transfer, liquid-liquid equilibrium and the flows generated by concentration and density differences.
Conclusion
Microdroplet nucleation during multicomponent drop dissolution is a coupled transport and phase-behavior phenomenon. In the water–ethanol and anethole system, diffusion triggers water-in-oil and oil-in-water emulsification in different regions, while Marangoni circulation and natural convection influence droplet movement and organization. For industrial multiphase applications, understanding these interactions can help explain when spontaneous emulsification occurs and why its effects cannot be predicted from composition or diffusion alone.