Access Official Technical PDF

Share Summary:LinkedInEmail

In power electronics, electrical losses become heat, and that heat can change how components perform. Electro-thermal modeling links these effects so design teams can estimate component temperatures under changing electrical loads. Applying it early in converter development can help engineers assess thermal limits, reliability and design trade-offs before hardware is finalized.

That matters particularly in compact, high-power-density systems. Components may share a substrate, baseplate or cooling arrangement, so heat from one device can influence the temperature of another. A model that treats each component as thermally isolated may therefore miss important interactions.

Why electro-thermal modeling matters in power electronics

Power semiconductor devices, magnetics and capacitors all generate heat through non-ideal electrical behavior. Semiconductor losses include conduction and switching losses; magnetic components and capacitors also dissipate energy. Their temperatures, in turn, can affect electrical characteristics and loss calculations. This creates a feedback loop: losses produce heat, and temperature can influence subsequent losses.

If thermal considerations are postponed until late in the design, teams may need to revisit component selection, packaging or cooling. Early analysis helps evaluate whether components are likely to remain within permissible thermal limits and supports decisions involving power density, weight, cost and reliability. The goal is not simply to minimize temperature, but to make informed design choices without unnecessary overdesign or inadequate thermal margins.

Where conventional thermal models can fall short

A common approach represents a device’s heat flow with a lumped thermal network, often using resistance and capacitance values. Such networks are useful for estimating temperature over time, but their accuracy depends on how well they reflect the actual assembly and operating conditions.

Some traditional approaches use thermal parameters based on steady-state temperatures and do not fully account for temperature-dependent power losses or heat transfer between nearby components. That can be a limitation in a converter where devices are close together or share a cooling path. The temperature of an IGBT, for example, may be affected by heat from an adjacent diode as well as by its own losses.

Physical details also matter. The thesis analysis found that omitting a thermal grease layer led to underestimation of temperatures at several locations in an inverter module. A model’s assumptions about interfaces and boundary conditions can therefore affect results, not just the accuracy of the semiconductor loss calculations.

How an integrated electro-thermal modeling workflow works

An integrated approach combines electrical simulation with thermal analysis, then uses the thermal results to build a model suited to circuit-level studies. In the framework described in the source study, PLECS calculates component power losses, while finite element analysis (FEA) predicts transient heat flow and temperature distribution through the system.

  1. Calculate electrical losses. Circuit simulation estimates losses under the chosen operating conditions. The loss models can account for temperature dependence where relevant.
  2. Analyze heat flow. FEA represents component geometry, material layers and thermal boundary conditions to estimate transient temperatures.
  3. Extract a compact thermal model. Thermal responses from the FEA are curve-fitted to obtain parameters for a compact RC thermal network.
  4. Couple electrical and thermal behavior. The compact model is used in circuit simulation so losses and temperatures can be evaluated together as electrical loading changes.

This division of work combines detailed thermal analysis with a model that can be used for repeated operating-condition studies. It also allows engineers to examine temperatures at critical locations, rather than relying only on a single device-level thermal resistance.

Accounting for thermal coupling between components

Self-heating describes the temperature rise caused by a component’s own losses. Thermal coupling, or cross-heating, describes the temperature change caused by heat from another component. A coupled model represents both effects, including the way heat travels through shared package layers and toward a common cooling system.

The study applied its framework to a boost converter, a three-phase voltage-source inverter and an interleaved bidirectional boost converter. In the boost-converter case, excluding thermal interaction produced estimated junction-temperature errors of 17% for the IGBT and 26.7% for the diode. In the inverter analysis, omitting component interactions resulted in temperature differences at multiple IGBT locations, including the junction and baseplate. These figures are specific to the analyzed applications; they illustrate why designers should assess coupling rather than assume it is negligible.

Practical considerations for design teams

Model quality depends on more than the choice of simulation software. Engineers need appropriate electrical loss inputs, material properties, package structure and cooling boundary conditions. Interfaces such as solder and thermal grease should be represented when they are part of the physical assembly. The analysis should also reflect the intended load profile: transient operation can produce temperature behavior that a steady-state estimate does not capture.

For system integrators and converter designers, a practical workflow is to identify heat-producing components and shared thermal paths early, then determine which locations and operating conditions need evaluation. FEA can support detailed investigation of geometry and heat flow, while the extracted compact model can make broader electrical and thermal operating studies more manageable.

Conclusion: use coupled analysis to make better design decisions

Integrated electro-thermal modeling connects power loss calculations with transient temperature prediction. By representing temperature-dependent losses, component interactions and relevant thermal interfaces, it can provide a more complete picture than an isolated lumped thermal model. For engineers developing compact power converters, the practical implication is clear: include thermal behavior early, validate the assumptions behind the model and account for shared heat paths when assessing component temperatures and system-level trade-offs.

Access Official Technical PDF

About The Author