Access Official Technical PDF

Share Summary:LinkedInEmail

Effective ESD static control is a coordinated process, not a single product installed at a workbench. Electrostatic discharge (ESD) can damage sensitive electronic components, while static charge can attract contaminants in clean environments or complicate the handling of films and small parts. For manufacturers, the practical challenge is to control charge across people, work surfaces, equipment and product movement—and to verify that those controls are working.

A static control program can combine personnel grounding, dissipative work surfaces, monitoring, ionization and protective packaging. The right combination depends on the materials and operations involved, from component assembly and service to handling and transportation.

Why ESD static control requires a system approach

Static charge can be present on people and materials in a production area. A charge that is not managed may discharge to a sensitive device, or contribute to unwanted effects such as contamination attraction. The impact is not limited to a potentially damaged component: production time can also be lost while issues are investigated and affected work is addressed.

These risks occur at different points in a process. Personnel may need grounding while handling components; a bench surface may need to limit charge buildup; and a device may need protection after it leaves the workstation. Treating each point as part of one control system helps operations teams identify where safeguards are needed rather than relying on one measure to cover every situation.

Ground personnel and monitor the workstation

Wrist straps and footwear grounders are among the personnel-grounding options described in the product catalog. A wrist strap connects the wearer to ground through a ground cord, which contains a current-limiting resistor. Adjustable fabric, metal and thermoplastic bands illustrate how selection can account for fit, wear conditions and the monitoring arrangement. Dual-conductor straps are designed for use with compatible continuous monitors; the strap, cord and monitor must be matched appropriately.

For mobile personnel or other applications, heel and toe grounders are also part of the broader workstation-control range. The key operational point is that grounding equipment is one element of a managed setup. It should be used as intended and checked as part of the facility’s ESD procedures.

Workstation monitors can provide continuous checks of grounding connections. Depending on the monitor type, the monitored points may include wrist straps, dissipative surfaces or equipment grounds. Some described systems also monitor operator body voltage or electromagnetic interference on metal grounds. These functions help make grounding conditions visible to operators and support a timely response when a monitor signals an issue.

Verification is also important. Portable monitor-checking equipment can simulate specified resistances and signals to check whether workstation and ground monitors respond as expected. That gives facilities a way to check monitor operation against their own requirements, rather than assuming that an installed device continues to function correctly.

Control charge on surfaces and in the air

Dissipative mats, worksurfaces and flooring help address static control at the point of handling. The catalog includes bench mats, floor mats, rolls, sheets and permanent vinyl flooring. These products have different roles in a work area, so selection should reflect where components are handled and which surfaces need to be included in the grounding or monitoring plan.

Ionization is another control method identified for static-sensitive environments. It can be relevant where non-conductive materials are present and grounding alone does not address the charge-control need. Ionizer selection, monitoring and measurement belong within the overall process: the catalog includes ionizers as well as equipment for evaluating ionization parameters. This supports a program that considers not just whether equipment is installed, but whether relevant conditions are being observed.

Protect components through packaging and transport

ESD safeguards should extend beyond the bench. Static-control packaging and transportation products are intended to protect items as they are handled, stored or moved. The listed options include static-shielding bags, conductive bags and containers, moisture-barrier bags, cushioned packaging and related materials. Different packaging types address different needs, so the choice should be tied to the component and the conditions it will encounter.

Packaging therefore forms a link between production controls and downstream handling. A well-controlled workstation does not by itself protect a device during transportation; packaging must be considered as part of the product’s route through the operation.

Build controls around the process

A practical ESD control plan can be developed by mapping the points where sensitive products are handled and identifying the controls required at each one. Consider:

  • Personnel: Choose wrist straps or footwear grounding appropriate to the task and compatible with the monitoring method.
  • Workstations: Identify which mats, surfaces and equipment grounds need control or monitoring.
  • Ambient charge: Evaluate whether ionization is needed for materials or processes that are not addressed by grounding alone.
  • Verification: Establish how monitors and other control equipment will be checked against facility requirements.
  • Product movement: Select packaging for handling, storage and transportation needs.

Training supports consistent use of these measures. The source catalog also identifies services such as on-site training and process evaluation, underscoring that equipment selection and day-to-day implementation are connected tasks.

Conclusion: connect protection with verification

For industrial operations handling sensitive electronics, ESD protection is strongest when it spans the full workflow. Personnel grounding, controlled work surfaces, monitoring, ionization where appropriate, packaging and equipment verification address different parts of the problem. The practical implication is clear: define the process first, match controls to each handling point, and include checks that confirm the system is operating as intended.

Access Official Technical PDF

About The Author