Access Official Technical PDF

Share Summary:LinkedInEmail

EV wireless charging is more than a convenient alternative to plugging in. It is one possible part of a broader charging infrastructure designed to serve private vehicles, commercial fleets and, eventually, autonomous transportation. Making that infrastructure practical requires coordinated decisions about where vehicles charge, how charging loads affect the grid and how power conversion is controlled in real time.

For industrial automation engineers, system integrators and operations leaders, the key consideration is how these elements work as a system. Wireless charging does not remove the need for electrical infrastructure or control. Instead, it changes the vehicle-to-charger connection and creates opportunities to automate charging while vehicles are parked or in service.

Why EV adoption changes charging infrastructure

Electric vehicles bring a different refueling pattern from internal combustion engine vehicles. Rather than making a dedicated stop to replenish fuel, drivers can charge while a vehicle is parked at home, at work or at a public facility. That pattern makes the availability and location of electric vehicle supply equipment (EVSE) central to the user experience.

Charging demand also has a grid dimension. A large number of high-power chargers operating at the same time in one area can create concentrated demand peaks. The whitepaper describes slower charging during vehicle downtime as one way to distribute charging over longer periods, alongside fast charging at locations such as highway corridors. Infrastructure planning must therefore consider both the charging speed required at a site and the likely pattern of vehicle use.

Battery improvements and wider charging access were identified as important factors in EV adoption. But infrastructure design must account for more than the vehicle battery: it must balance public and private charging, fast and slower charging, and the capacity of local distribution networks.

EV wireless charging and vehicle downtime

Wireless charging transfers energy without requiring a driver to connect a cable. In stationary applications, a vehicle parks over charging equipment installed on or below the ground. Potential settings include residential garages, commercial parking facilities and locations where vehicles wait between trips.

The operational benefit is the ability to charge during time that would otherwise be idle. In a fleet environment, reducing the need for manual plug-in steps could also support more automated vehicle routines. The charging process still depends on compatible vehicle and ground-side equipment, as well as the power electronics and controls needed to manage energy transfer.

The whitepaper describes magnetic resonance as the basis of the wireless charging approach it discusses, and notes that the intended charging experience can be comparable with wired charging in speed and efficiency. It also emphasizes that neither wired nor wireless charging is perfectly efficient: the figures given range from 80% to 96% for both approaches. These figures are presented as a range, not as a guarantee for every installation or operating condition.

Stationary and dynamic charging applications

Stationary charging

Stationary wireless charging takes place while a vehicle is parked over a charging assembly. This model fits locations where vehicles regularly remain in one place for a period, including homes and fleet parking areas. For integrators, site planning must account for the ground assembly, vehicle alignment and connection to the electrical supply.

Dynamic charging

Dynamic wireless charging transfers energy while a vehicle moves over equipment embedded in a roadway. The whitepaper presents this as a possible future application for selected high-traffic areas, such as city centers, airports or bus routes. It could change how vehicles are supplied with energy while in operation, but would require charging infrastructure to be incorporated into the road itself. It is therefore distinct from deploying stationary chargers in parking spaces.

Both approaches point to the importance of interoperability. Vehicles and charging equipment need to work across compatible systems; standards are part of enabling that wider deployment. The whitepaper notes that standards were emerging at the time of publication, making interoperability a consideration for the development of the sector.

Grid coordination and bidirectional charging

Charging infrastructure can also become a controllable part of a wider energy system. The whitepaper describes bidirectional charging, in which the vehicle, charging equipment and grid exchange information and power. Under an arrangement with a power provider, a vehicle could return some stored energy when demand is high and charge when grid capacity is more available. The specific participation and incentives would depend on the agreement between the vehicle owner and provider.

This concept makes charging control and scheduling important. A coordinated approach could help shift some charging away from periods of high demand, while vehicle batteries could provide power back when requested. The practical implication is that EV charging is not only a matter of charger installation: it may also involve communication between vehicles, EVSE and energy providers.

Real-time power conversion and control

Wireless charging depends on power conversion that must be managed in real time. The whitepaper identifies processing capability, analog measurement and control outputs as important requirements for this work. Texas Instruments’ C2000 real-time microcontrollers are described as combining digital signal processing for mathematical calculations with on-chip analog-to-digital converters, high-resolution pulse-width modulators and communication interfaces.

These types of resources are relevant to power-electronic control because a system must process measurements and generate control signals as it manages energy transfer. For engineers evaluating a design, the focus is not simply on processor performance in isolation. The controller, sensing, modulation and communication functions must fit the requirements of the complete charging platform.

Implications for automation and fleet operators

Wireless charging becomes especially relevant when vehicles operate with limited or no driver involvement. An autonomous fleet could travel to a stationary charging point and recharge without a person handling a cable. That possibility links vehicle automation to automated infrastructure and charging control.

For project teams assessing EV charging, practical questions include:

  • Where will vehicles spend time parked? Those locations may be candidates for stationary charging.
  • What charging mix suits the site? Fast charging and slower charging serve different operational and grid needs.
  • How will charging be coordinated? Communication and scheduling may matter where multiple vehicles or grid interactions are involved.
  • What control architecture is required? Power conversion calls for suitable processing, measurement, modulation and communication capabilities.

Conclusion

EV wireless charging can support a more automated charging experience, particularly where vehicles are routinely parked or operate as fleets. Its wider value depends on more than eliminating a cable: successful deployment also requires appropriate site planning, grid-aware charging strategies, interoperability and real-time power control. For automation and operations teams, treating the charger, vehicle, controls and electrical infrastructure as one connected system is essential to assessing where wireless charging fits.

Access Official Technical PDF

About The Author