Access Official Technical PDF

Share Summary:LinkedInEmail

A grid-connected solar PV system must do more than convert sunlight into electricity: its array configuration and power-conversion equipment must work together to deliver energy to the electrical grid. A study of a rooftop installation at Integral University in Lucknow illustrates how engineers can model a photovoltaic plant and compare the results with operating data. The case focuses on a nominal 150 kW system and highlights practical considerations that matter when designing, assessing, or maintaining commercial rooftop solar.

Modeling a 150 kW rooftop solar PV system

The installation analyzed in the study uses 460 polycrystalline silicon modules, each rated at 320 W, along with three inverters rated at 50 kVA each and a transformer. The system is described as a 150 kW plant. The module count and nameplate rating give an array capacity of 147.2 kW, so the 150 kW figure should be understood as the plant’s nominal rating rather than the exact sum of the module ratings.

The researchers developed a MATLAB/Simulink model using the module’s electrical parameters and compared simulated behavior with data collected from the rooftop plant. This approach gives engineers a way to examine expected array behavior while also checking how a model relates to an operating installation. The study reports daily plant data collected over 2019, offering a time-based record for comparison rather than relying solely on standard test conditions.

How a PV module produces electrical power

A photovoltaic cell uses semiconductor layers to convert light into electrical energy. When photons reach the cell’s p-n junction, they generate electron-hole pairs. The resulting charge movement creates a voltage; when a load is connected, current can flow. Individual cells are combined into modules, and modules connected in series and parallel form a PV array.

For the modeled 320 W module, the reported standard test condition (STC) values include a maximum-power voltage of 37.20 V and current of 8.61 A. The listed open-circuit voltage is 46.18 V, and short-circuit current is 9.06 A. STC provides a consistent reference for comparing module characteristics; actual output at a site can vary with operating conditions.

Temperature is one factor included in the model. The module parameters give temperature coefficients of +0.50%/°C for short-circuit current, -0.30%/°C for open-circuit voltage, and -0.40%/°C for maximum power. These values describe how the listed electrical characteristics change with cell temperature and help engineers represent conditions beyond the reference test point.

Array configuration and partial shading

Series connections increase array voltage, while parallel connections increase current. The study models two different combinations of modules in series and parallel. Its purpose is to compare how array configuration, including partial shading, affects modeled output. The reported results show similar output power for the two modeled cases, with percentage differences between theoretical and simulated values of 0.69% and 0.75%.

Those comparisons should be read in context: the configurations are modeling cases, not a general guarantee that shading has little effect on a real installation. Shading can arise from nearby objects or from material on a module surface, such as dust, leaves, water deposits, or bird droppings. When only part of an array receives sunlight, module and string behavior can differ from an evenly illuminated condition.

The paper also identifies potential overheating, or hot spots, as a concern associated with shading. It notes that temperature, humidity, moisture, snowfall, ultraviolet exposure, and environmental gases may also affect module performance or contribute to degradation. For plant operators, the practical takeaway is to consider both electrical design and site conditions when interpreting performance data.

From PV array to the utility grid

A grid-connected installation includes more than modules. In the studied system, the main components and their roles are:

  • PV array: Modules generate DC electricity and are arranged in series and parallel to meet system requirements.
  • Junction box: Connects module outputs and provides a point for combining array wiring.
  • Inverters: Convert DC output from the array into AC power for grid connection. The study describes three inverters, each rated at 50 kVA.
  • Transformer: Transfers electrical energy between circuits through electromagnetic induction.
  • Grid connection: Provides the interface through which the converted power is delivered to the electrical system.

The installation is described as operating without batteries. As a result, the study concerns a grid-connected arrangement rather than an off-grid system designed to store energy for later use. The inverter is an important part of this arrangement because it converts the array’s DC output to AC and must operate in coordination with the grid.

Using operating data to inform decisions

Simulation can help engineers assess how module parameters and array layout influence expected electrical behavior. Comparing a model with real-time plant data adds an operational reference point and can help identify where assumptions or site conditions need closer attention. In this case, the reported small percentage differences between theoretical and simulated power indicate close agreement for the two modeled configurations; they do not, by themselves, establish that every operating condition or source of degradation has been captured.

For engineering and operations teams, useful questions include whether recorded output is consistent with the expected conditions, whether shading or soiling may be affecting modules, and whether temperature-related changes are being considered. The study’s year of daily observations also underlines the value of reviewing performance over time rather than treating a single output reading as a complete picture.

Conclusion

This rooftop installation demonstrates how photovoltaic array modeling, inverter selection, module configuration, and grid integration come together in a commercial-scale solar project. Its comparison of modeled results with operating data provides a practical framework for evaluating system behavior, while its discussion of shading and environmental influences shows why nameplate ratings alone cannot describe field performance. For plant managers, system integrators, and engineers, the key implication is to pair sound electrical design with ongoing attention to site conditions and measured operating data.

Access Official Technical PDF

About The Author