Access Official Technical PDF

Share Summary:LinkedInEmail

Power electronics in electric transportation provide the conversion and control functions that connect generators, energy storage, propulsion motors, and onboard loads. As aircraft, ships, and road vehicles adopt more electric systems, engineers must manage different voltage levels, AC and DC loads, variable power demands, and operational constraints. Converter topology and control strategy are therefore central to system design—not simply component-level choices.

More-electric aircraft (MEA), electric ships (ES), and electric vehicles (EVs) apply these principles in distinct ways. Across all three, the engineering challenge is to route power reliably while meeting requirements for efficiency, weight, space, power quality, and fault tolerance.

Why power electronics matter in electric transportation

Electric propulsion depends on power converters to regulate power flow between sources and loads. AC-DC converters can connect AC generators to DC distribution buses; DC-DC converters adapt voltage between buses and storage; and DC-AC inverters supply motors and other AC loads. Control methods determine how these converters respond to changing demand and coordinate within a larger electrical system.

The system-level implications vary by transport mode. Aircraft designers are concerned with replacing mechanical, hydraulic, and pneumatic functions with electrical alternatives while accommodating diverse onboard loads. Ship designers must coordinate generators, propulsion, and zonal distribution. EV designers must manage battery power, motor drives, charging, and—in some architectures—multiple energy sources.

Power electronics in more-electric aircraft

In an MEA, electrical systems take on functions traditionally supplied by hydraulic, mechanical, or pneumatic power. This can reduce dependence on mechanical linkages and hydraulic networks and change how aircraft loads receive power. Electrical architectures may include AC and DC buses, with converters supplying different load requirements.

That mix of loads makes conversion and power quality important design considerations. Aircraft power systems may use rectifiers to convert AC to DC, inverters to provide AC power, and transformer-rectifier units to supply DC loads. Active power filters can address harmonics from nonlinear loads, while phase-locked loop (PLL) methods help converters track the phase and frequency of AC systems. Variable frequency and measurement noise make accurate tracking a control challenge.

Multilevel converters are another area of interest. Compared with two-level designs, they can reduce output harmonic distortion and the voltage stress on individual devices. Their use may also support efforts to improve fault tolerance. Research has examined PWM strategies, multiphase motor drives, and multi-port converters for managing power among aircraft electrical networks and storage elements.

Electric ship systems: choosing AC or DC distribution

Electric propulsion gives ship designers more flexibility in equipment placement than arrangements that rely on long mechanical shaft-lines between engines and propellers. Power electronics make it possible to connect generators, propulsion drives, auxiliary loads, and storage through an electrical distribution system.

Medium-voltage AC (MVAC) and medium-voltage DC (MVDC) are two approaches considered for shipboard power. MVAC systems can use solid-state transformers for power conversion, although system design must account for equipment size, generator requirements, and reactive power compensation. MVDC systems can allow generators to operate in parallel without the same frequency constraint and avoid transmitting reactive power through the distribution system.

DC ship architectures also create opportunities to integrate energy storage and other energy sources. They bring added system complexity, however, making suitable modelling and analysis tools important. Averaged converter models, which do not represent high-frequency switching in detail, can reduce simulation time and computational demands for system-level studies.

Converter choice also involves trade-offs. Three-level DC-DC converters and modular multilevel converters have been studied for MVDC applications. Modular designs can support different voltage levels and distributed energy storage, but their control and dynamic behaviour can be more complex. Engineers must weigh these characteristics against the needs of the specific shipboard system.

EV converters and energy management

Battery electric vehicles, hybrid electric vehicles, and fuel-cell electric vehicles have different energy sources and system requirements. BEVs rely on batteries, HEVs combine electric propulsion with an internal combustion engine, and FCEVs use a fuel-cell system alongside electrical components such as a battery or supercapacitor. These architectures place different demands on power conversion and energy management.

Bidirectional DC-DC converters are important where energy must flow in both directions—for example, between a battery and a high-voltage DC bus. In boost operation, a converter can transfer energy from a lower-voltage source to a higher-voltage bus; in buck operation, it can support recharging from the bus. Converter designs may be isolated or non-isolated, and may use interleaving or multilevel structures. Selection involves considerations such as component requirements, control flexibility, current sharing, and the intended operating range.

Motor inverters convert DC-bus power to the AC power needed by traction motors. PWM and space-vector PWM (SVPWM) strategies influence switching behaviour and output waveforms. Other power-electronic functions can include onboard charging, power-factor correction at the AC input, regenerative energy transfer, and auxiliary power supplies. In vehicles that use more than one energy source, multi-input converters can provide controlled power exchange between sources.

Design implications for engineers and integrators

Across transport applications, a converter cannot be selected in isolation from its electrical network and operating profile. A useful design review should consider:

  • Architecture and voltage levels: Identify the AC and DC buses, load requirements, and interfaces between sources and converters.
  • Power flow: Establish whether energy must flow in one direction or both, including charging or energy-storage requirements.
  • Power quality and control: Assess harmonic performance, bus-voltage regulation, synchronization, and response to changing loads.
  • Integration and resilience: Consider equipment placement, modularity, fault response, and the complexity of system-level control.
  • Validation: Use suitable component models and system-level analysis to examine interactions across generators, converters, storage, propulsion, and loads.

Conclusion

Power electronics are a foundation of electric propulsion in aircraft, ships, and road vehicles, but the best solution depends on the application. MEA systems emphasize conversion across varied onboard loads; electric ships require coordinated distribution for propulsion and other loads; and EVs depend on converters for battery management, motor drives, and charging. For technical decision-makers, the practical priority is to match converter topology and control to the complete system architecture, operating demands, and integration requirements.

Access Official Technical PDF

About The Author