Half-Heusler thermoelectric materials are being developed to convert heat directly into electrical power, including in the mid-to-high temperature range. For engineers evaluating thermoelectric energy conversion, their appeal lies in a combination of thermal stability, potential for large-scale production and increasingly strong reported performance. Yet a high-performing material is only part of the engineering challenge: its properties must also translate into an effective, durable thermoelectric generator module.
Research reviewed in 2018 showed how composition, lattice disorder and electronic band structure can be tuned to improve half-Heusler compounds. In particular, results reported since 2013 pushed the dimensionless figure of merit, zT, from values near 1 toward 1.5 in both n-type and p-type materials over relevant elevated-temperature ranges. Two approaches—reducing lattice strain and introducing resonant dopant states—illustrate how processing and composition can influence performance.
What makes half-Heusler compounds promising?
Half-Heusler compounds generally have a three-element XYZ composition and a crystal structure with three occupied face-centered cubic sublattices and one unoccupied sublattice. Among the most studied are RNiSn-type materials, where R is a refractory metal such as hafnium, zirconium or titanium. These compounds offer a useful combination of a high Seebeck coefficient, moderate electrical resistivity and thermal stability. They can also be produced in large quantities, an important consideration when moving from materials research toward device manufacture.
Thermoelectric performance is commonly described by zT = S2σT/k, where S is the Seebeck coefficient, σ is electrical conductivity, T is absolute temperature and k is thermal conductivity. The numerator, S2σ, is the power factor. A material can therefore improve its zT by raising the power factor, lowering thermal conductivity, or combining both changes. These variables are interdependent: a modification that affects carrier transport may also influence heat transport.
How researchers improved the thermoelectric figure of merit
Reported high-zT half-Heusler compounds draw on several mechanisms, rather than one universal recipe. Researchers have investigated structural order, phase separation, nanostructures, mass fluctuations from alloying, high band degeneracy, heavy hole bands and dopant-related electronic states. Because these features can affect more than one thermoelectric property, optimization requires considering the material as a coupled system.
For example, nanostructure can influence both thermal conductivity and the Seebeck coefficient, while alloying-related mass fluctuations may affect heat transport as well as electronic band structure. This complexity means that reducing thermal conductivity alone is not always sufficient; preserving or improving electrical performance is also essential.
Lattice-strain relief through processing
In n-type (Hf,Zr)NiSn compounds, one investigated route to better performance was reducing lattice strain through higher-temperature processing. Structural disorder, including antisite defects, can arise because half-Heusler phases are closely related to full-Heusler structures. Such disorder may influence both electronic structure and phonon scattering. X-ray diffraction peak broadening can be used to assess lattice strain, although peak width also has other contributions.
In the reported work, increasing the spark plasma sintering temperature toward the material’s melting point reduced measured strain. The reduction was as much as 30% across the samples studied. The samples also contained nanograins, but subsequent annealing increased grain size without a corresponding change in strain. This indicated that, in those samples, strain tracked processing temperature rather than grain size.
Higher processing temperatures were associated with an increase of up to 50% in the power-factor–temperature product across the reported samples. Among the spark-plasma-sintered samples, zT rose by about 20%, from 1 to 1.2. The proposed explanation included reduced charge-carrier density, increased carrier mobility and the disappearance of many in-gap defect states associated with antisite disorder. These results make processing conditions a significant variable to assess alongside composition and grain structure.
Resonant dopants and band-structure engineering
A second approach uses dopants that interact with the host material’s electronic states. When localized dopant states hybridize with extended host-band states, they can produce resonant states near the Fermi level and increase the density of states. In some cases, this raises both electrical resistivity and the Seebeck coefficient. The net effect on the power factor and zT depends on the dopant and the balance among transport properties.
In the examined Hf-Zr-Ni-Sn system, vanadium, niobium and tantalum were tested as dopants. Vanadium increased resistivity and the Seebeck coefficient compared with the undoped compound, while the power factor remained approximately unchanged. The resulting reduction in thermal conductivity was largely associated with increased electrical resistivity. A zT of 1.3 was reported near 850 K for a vanadium-doped composition. By contrast, niobium and tantalum behaved as nonresonant dopants in this study: both resistivity and the Seebeck coefficient decreased, and the power factor fell.
The comparison shows why dopant selection cannot be based on added concentration alone. The electronic interaction between dopant and host matters, and a change that improves one measured property may not improve all of them.
From material performance to generator performance
Material zT is not the same as thermoelectric module efficiency. The review reported an n-p couple module with an efficiency near 9% despite using materials with zT below 1, close to the calculated ideal value for that module. It also described a three-stage cascade generator with a reported efficiency of 20%. For high-zT half-Heusler materials, ideal efficiencies near 13% were calculated, while measured module results remained below those ideal values.
This gap is an important engineering consideration. Demonstrating improved transport properties in a sample does not by itself establish equivalent gains in a generator. Module design and the practical challenges of integrating material legs must be addressed, alongside questions of material lifetime and resilience.
Practical implications
For teams assessing thermoelectric energy conversion, half-Heusler research points to three priorities: optimize the coupled electrical and thermal properties, control processing-induced structural disorder, and evaluate performance at the module level rather than relying on zT alone. The reported gains from strain relief and resonant doping show that both manufacturing conditions and band-structure engineering can matter. Continued materials discovery—including computational and high-throughput approaches—may expand the available compositions, but practical deployment will also depend on resolving durability and device-engineering challenges.