Hybrid electric vehicle performance depends on more than the choice of engine or motor. Powertrain architecture, component sizing and the driving schedule all affect how effectively a vehicle meets demands for speed and torque. A simulation comparison of a small gasoline car, a series hybrid and a parallel hybrid illustrates how these factors shape energy use, emissions and vehicle capability.
For engineers working with electrified drives, the comparison also underscores a familiar design principle: evaluate components as part of an integrated system. The interaction among the internal combustion engine (ICE), traction motor, generator, battery and power electronics determines how power is converted and delivered across operating conditions.
Hybrid electric vehicle performance depends on drivetrain architecture
A hybrid electric vehicle combines an ICE with an electric motor and battery-based energy storage. Depending on the drivetrain topology, the two power sources can operate independently or contribute to propulsion together. The simulation study considered series and parallel arrangements, alongside a conventional gasoline vehicle. It also describes series-parallel systems, which combine characteristics of both architectures.
Series hybrid: electric motor drives the wheels
In a series hybrid electric vehicle (SHEV), the traction motor is mechanically connected to the drivetrain and propels the wheels. The engine drives a generator, which can supply electricity to the motor or charge the battery. During regenerative braking, the traction motor operates as a generator and returns some energy to storage.
Because the wheels are driven electrically, power from the engine passes through electrical conversion stages before reaching the drivetrain. The motor, generator, battery and converter must therefore be sized and controlled to meet the vehicle’s traction requirements across the driving cycle.
Parallel hybrid: engine and motor can provide propulsion
In a parallel hybrid electric vehicle, the engine and electric motor are connected to the drivetrain through a mechanical coupling. The vehicle can be propelled by the engine, the motor or both, depending on operating requirements. Since engine power can be delivered mechanically to the wheels, this arrangement avoids the engine-to-electric-to-mechanical conversion path used in a series layout.
The parallel configuration described in the study uses one electrical machine. Its motor does not need to provide all of the vehicle’s peak propulsion power because the engine can contribute. A series-parallel arrangement can offer features of both layouts, but its additional electric machine and more complex mechanical coupling increase control complexity.
Why driving cycles change the results
The vehicles were evaluated in ADVISOR simulation using three schedules: CYC_UDDS, CYC_NEDC and CYC_INDIA_URBAN. These cycles differ in duration, distance, speed profile, acceleration and frequency of stops. Those differences influence when the engine and motor operate, how much torque is requested, and how often the vehicle accelerates, coasts or brakes.
For example, the India urban schedule includes 52 stops, compared with 17 for UDDS and 13 for NEDC. Frequent stopping and restarting creates a different operating pattern from a schedule with longer periods at speed. As a result, motor-converter operating points and engine efficiency are not fixed properties of a vehicle: they depend on the demands imposed by the selected cycle.
This is an important consideration for powertrain simulation and component selection. A design that meets a particular speed or torque demand in one schedule may operate differently under another. Testing multiple cycles can reveal whether the motor, converter and energy storage system can satisfy a broader range of operating conditions.
Acceleration and gradeability are complementary tests
The study evaluates more than cycle-based operation. Acceleration power is treated as a combination of power needed to increase vehicle speed, overcome rolling resistance and counter aerodynamic drag. The analysis also considers grade-climbing power: the power required to maintain a specified speed while negotiating a slope.
These relationships connect vehicle-level targets to drivetrain sizing. Acceleration demand increases with vehicle mass and speed change, while aerodynamic drag depends on factors including frontal area, drag coefficient and speed. Gradeability adds the effects of slope and rolling resistance. Engineers can use these demands to assess whether the combined engine and electric drive can deliver the required wheel power.
In the reported India urban-cycle comparison, the parallel hybrid had the strongest acceleration results among the three test vehicles. It reached 0–120 km/h in 12.8 seconds, compared with 23.2 seconds for the series hybrid and 34.7 seconds for the gasoline vehicle. The study also reports gradeability at 88.5 km/h of 22.4% for the parallel hybrid, 4.9% for the series hybrid and 7.4% for the conventional vehicle. These values reflect the specific simulated vehicle configurations and assumptions; they should not be treated as universal results for every hybrid design.
Emissions and efficiency require system-level evaluation
The comparison examines greenhouse gas emissions across the selected driving schedules and reports lower emissions for the parallel hybrid than for the series hybrid and gasoline vehicle in the modeled cases. It also notes that overall drivetrain efficiency can be limited by inefficient use of the ICE. Hybridization alone does not guarantee an efficient operating point: control strategy and the way engine and motor power are coordinated remain important.
Power electronic converters are central to this coordination. Their role is to support the electric traction drive and manage power conversion between system components. The study points to improved semiconductor devices, switching techniques and converter topologies as potential routes to reducing hybrid-system losses. It also identifies energy storage development as relevant to future improvements, without quantifying the effect of particular technologies.
Practical implications for powertrain design
For engineering teams evaluating hybrid drivetrains, the comparison suggests several practical priorities:
- Match architecture to the duty cycle. The balance between mechanical and electrical power paths affects component demands and operating efficiency.
- Test across multiple schedules. Stop frequency, speed and acceleration patterns change motor-converter and engine operating conditions.
- Size for both transient and sustained demands. Acceleration and grade-climbing requirements provide complementary checks on available wheel power.
- Assess emissions and efficiency together. Results depend on how the complete powertrain operates, not simply on the presence of an electric motor.
Simulation provides a structured way to compare drivetrain configurations and examine how they respond to different operating demands. The practical conclusion is that hybrid electric vehicle performance is shaped by the combined effects of topology, component sizing, power electronics and drive-cycle characteristics. Evaluating those factors together helps engineers make more informed decisions about traction capability, efficiency and emissions.