Access Official Technical PDF

Share Summary:LinkedInEmail

The IEGT power device was developed to address a demanding design challenge: how to control high voltage and current while reducing conduction losses in power conversion equipment. Introduced by Toshiba engineers Mitsuhiko Kitagawa and Akio Nakagawa in 1992, the injection-enhanced gate transistor uses carrier storage to strengthen conductivity modulation through the device. By 2000, IEGT chips had been assembled in a multichip pressure-contact package, extending the technology’s relevance to high-power applications.

Why conductivity modulation matters

An IEGT is a power semiconductor related to the insulated-gate bipolar transistor (IGBT). Like an IGBT, it is controlled through a gate, but its internal structure is designed to retain more excess carriers in the n-type layer. This is significant because conductivity modulation allows that layer to conduct more readily when the device is on, helping reduce its on-resistance.

In a conventional IGBT, holes injected from the collector become less concentrated toward the emitter. The resulting excess-carrier distribution is therefore uneven, and conductivity modulation is not fully realized throughout the n-layer. The IEGT addresses this by changing the gate and emitter-side structure to retain carriers closer to the emitter.

How the IEGT structure stores carriers

The IEGT uses a trench gate structure. Its emitter n+ region is arranged to help keep excess carriers in the n− layer near the emitter rather than allowing their concentration to fall away in that region. This supports stronger conductivity modulation across the n− layer and, as a result, further reduces on-resistance.

The principle can be understood as a change in the distribution of carriers inside the device. Instead of relying on carrier injection that diminishes toward the emitter, the IEGT structure helps maintain a higher carrier density through more of the layer that carries current. That internal distribution is central to the device’s ability to combine high-voltage operation with lower conduction resistance.

IEGT and carrier-stored trench devices

In 1996, Mitsubishi Electric announced the Carrier Stored Trench Bipolar Transistor (CSTBT), which applied the same general principle of increasing carrier concentration in the n-layer. Its structure includes an additional n-layer between the emitter p-layer and the n− layer. Both technologies illustrate how semiconductor structure can be adapted to improve carrier storage and conductivity modulation in high-voltage devices.

The IEGT, CSTBT, and conventional IGBT are not identical designs. The relevant point for power-system designers is that carrier storage offers a way to strengthen conduction in the device’s bulk region. This structural approach helps explain why IEGT development was directed toward applications that need to manage substantial power.

Gate control and system-level implications

Despite its high-power role, the IEGT retains gate-drive characteristics similar to a conventional IGBT. Compared with thyristors and gate turn-off thyristors (GTOs), the source describes the IEGT as self-sustaining, which can simplify protection circuitry for a load short-circuit event. It also supports higher switching frequency, making more compact systems possible.

These characteristics matter beyond the semiconductor itself. A power converter must be considered as a complete system, including switching behavior, protection, packaging, and the ability to connect devices in parallel. The IEGT’s gate control and parallel-connect capability give designers options for building high-power converters without relying solely on traditional thyristor or GTO arrangements.

Press-pack packaging for high-power applications

In 2000, Toshiba mounted IEGT chips in a 125-millimeter multichip pressure-contact package, commonly called a Press Pack. The historical account describes development of 4.5-kV, 1.5-kA devices and also reports completion of a 4.5-kV/4-kA IEGT assembled in the 125-millimeter multichip package. These figures refer to developments reported in the account and underscore the effort to scale the device for high-power use.

Using multiple chips in a pressure-contact package supports high-current, high-voltage power conversion. The source identifies the Press Pack and power modules as packaging approaches that enable control of power at levels comparable to those handled by thyristors and GTOs. For system integrators, this makes packaging and device interconnection important parts of the design—not simply details added after selecting a semiconductor.

Where IEGTs have been applied

The technology was adopted in electric power conversion systems associated with power generation and transmission, where high reliability is required. The account also describes its use in inverters replacing conventional thyristors and GTOs for locomotives, high-speed rail vehicles, and large industrial motors.

These applications share a need to switch and control substantial electrical power. The IEGT’s combination of gate control, carrier-enhanced conduction, parallel connection, and high-power packaging made it a candidate for those roles. Selection for a specific installation still depends on the requirements of the complete converter and its operating environment.

Practical takeaways for power-conversion design

The IEGT’s development shows how device structure can influence system-level options. Its carrier-storage approach strengthens conductivity modulation and reduces on-resistance, while gate control and packaging support use in high-power conversion equipment. For engineers and technical decision-makers evaluating semiconductor technologies, the key considerations are not only voltage and current capability, but also switching, protection, parallel operation, and package design.

In practical terms, IEGTs expanded the available choices for applications traditionally served by thyristors and GTOs. Their use in grid conversion, rail inverters, and large motor systems reflects the value of pairing an appropriate device structure with a package and converter architecture designed for high-power operation.

Access Official Technical PDF

About The Author