Access Official Technical PDF

Share Summary:LinkedInEmail

Indoor photovoltaics offer a way to convert artificial light into electrical power for low-consumption devices. In industrial automation, this approach could support wireless sensor nodes and other microelectronic systems where reducing reliance on battery replacement is valuable. But indoor lighting is not simply a weaker version of sunlight: its intensity and spectrum vary, and photovoltaic cells can behave differently at low illumination levels. Selecting a suitable technology therefore requires matching the cell to its environment and power requirements.

How indoor photovoltaics generate power

Photovoltaic cells generate electricity by converting light energy into electrical energy. Indoors, the light source may be an LED, fluorescent lamp, or another artificial source. Illumination can range from very low levels to the brighter conditions found in places such as supermarkets. The available radiant power varies with the lighting environment, and indoor systems generally operate below 100 W/m2.

That difference matters in application design. A cell that performs well under sunlight may not deliver the same output under indoor lighting. Engineers should consider the actual light falling on the cell, how consistently it is available, and the electrical needs of the device being powered. Indoor harvesting is most relevant to low-power electronics; it should not be treated as a general replacement for facility power.

Indoor photovoltaics: comparing cell technologies

Indoor PV technologies use different materials and device structures, each with trade-offs in efficiency, cost, flexibility, and material considerations. The values reported for cell efficiencies vary across technologies and test conditions, so comparisons should be interpreted in context rather than as guaranteed performance in a particular installation.

Silicon-based cells

Amorphous silicon (a-Si) has a non-crystalline structure that can absorb light effectively. Thin films can operate under low-light conditions, making this technology relevant to small, low-consumption devices. The source discusses applications such as watches, calculators, cameras, phones, and measurement units. Its limitations include comparatively low efficiency and a shorter lifetime than crystalline silicon cells.

Crystalline silicon (c-Si) and multicrystalline silicon (mc-Si) are established photovoltaic materials. Crystalline silicon is typically made as wafers, while multicrystalline silicon consists of multiple crystal grains. The review reports lower efficiency ranges for these silicon types in its indoor-PV comparison than for some other materials. Their suitability still depends on the lighting conditions and the application’s power needs.

Thin-film and compound semiconductor options

Cadmium telluride (CdTe) is a thin-film option described as relatively inexpensive to manufacture. However, cadmium toxicity, limited tellurium availability, and efficiency considerations are noted as constraints. These material and supply factors are important when assessing technology choices for a specific product or deployment.

Gallium arsenide (GaAs) and gallium indium phosphide (GaInP) are compound semiconductor technologies. Their characteristics can support light harvesting under indoor illumination, but manufacturing complexity and material costs are challenges described in the review. In particular, GaInP production involves costly substrates and epitaxial growth processes. These technologies may be worth evaluating when their electrical characteristics align with the application, but cost and production considerations remain part of the decision.

Organic photovoltaics

Organic photovoltaics (OPVs) use organic semiconductor materials and can be made as thin, lightweight, flexible devices. The described manufacturing approaches include coating and printing processes, and the cells may be formed on flexible substrates. Potential applications include battery charging for handheld electronics. The review identifies lower efficiency and shorter lifetime as key limitations affecting commercial use.

Dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) use a light-absorbing dye alongside a semiconductor and electrolyte in a photoelectrochemical structure. They are presented as promising indoor power sources because they can be designed for different lighting conditions and are associated with comparatively simple fabrication and flexibility. Natural dyes are also discussed, although the choice of dye affects the device’s characteristics. DSSCs remain one option among several; real-world performance depends on the cell design and operating conditions.

Assessing an indoor energy-harvesting application

For automation teams considering indoor PV, start with the device and its operating environment rather than choosing a cell based on a headline efficiency value. A practical evaluation should account for:

  • Light conditions: Identify the source, intensity, and location of illumination where the cell will operate.
  • Power demand: Determine whether the intended sensor or electronic device can operate within the energy available from that environment.
  • Cell trade-offs: Compare material options against requirements for size, flexibility, efficiency, lifetime, and manufacturing cost.
  • Deployment constraints: Consider material concerns and whether the cell can be positioned to receive sufficient light during operation.

These checks help distinguish a technically plausible energy-harvesting opportunity from an application where lighting is too limited or device demand is too high. Indoor PV is most relevant where the system’s energy needs and available illumination are compatible.

Practical implications for industrial automation

Indoor photovoltaics expand the options for powering small electronic devices from light already present in a building. The technologies differ substantially: a-Si can respond to low illumination, OPVs offer flexibility, compound semiconductors have distinct material and manufacturing trade-offs, and DSSCs are highlighted as a promising indoor option. None should be selected without considering the application’s lighting and power requirements.

For engineers, integrators, and operations leaders, the key is to evaluate the complete operating context: the light reaching the cell, the energy required by the device, and the practical constraints of the chosen material. A well-matched indoor PV system may support wireless sensors and other low-power electronics, while a mismatch between illumination and demand can limit its usefulness. Treating indoor energy harvesting as an application-specific design choice is essential to setting realistic expectations.

Access Official Technical PDF

About The Author