Access Official Technical PDF

Share Summary:LinkedInEmail

Industrial signal processing ICs connect real-world signals to digital control, monitoring and user interfaces. In measurement equipment, that can mean converting low-level sensor inputs into digital data; in energy monitoring, it can mean processing current and voltage measurements. Audio processing adds another signal path, from microphone capture to playback. Choosing components across these functions requires attention to channel count, resolution, throughput, interfaces, power and integration needs.

Cirrus Logic’s product portfolio spans precision analog and mixed-signal components for industrial measurement and energy measurement, alongside audio converters, codecs and digital signal processors. The product summary describes distinct device families rather than a single universal solution: the best fit depends on the signal being measured or processed and the requirements of the wider system.

Industrial signal processing ICs for measurement

For process-control and analytical-instrument designs, analog-to-digital converters (ADCs) translate analog signals into digital values that a processor can use. The portfolio includes delta-sigma ADCs, a converter architecture represented across several product families. Devices vary in resolution, sample throughput, channel count, power consumption and package, so engineers need to match these characteristics to the measurement task and system design.

Some listed converters are single-channel parts, while others combine multiple channels with integrated amplifiers. For example, the CS5510 is a 16-bit, single-channel ADC with a listed throughput range of 53 to 212 samples per second and power consumption of 1.4 mW. The CS5528 is a 24-bit, eight-channel converter with integrated amplifiers, listed at throughput rates from 1 to 606 samples per second. These examples illustrate the range of options; they are not interchangeable, and the appropriate device depends on the required signal conditioning and measurement architecture.

When evaluating an ADC, engineers should consider more than nominal resolution. Throughput determines how quickly measurements can be produced; channel count affects how many inputs can be handled by a device; and integrated amplification can influence the surrounding analog front end. Package, power use and interface requirements also shape board-level implementation.

Energy measurement and monitoring

Energy measurement ICs address a more specialized task: processing electrical measurements for energy and related quantities. The listed Cirrus Logic devices support current sensing options such as shunts and current transformers, with some also supporting Rogowski coils. Depending on the part, measurement outputs include active and reactive energy, RMS current, or configurable digital outputs.

The CS5480, for instance, is listed as a three-converter device supporting shunt, current-transformer or Rogowski sensing. Its specifications include SPI or UART communication and configurable outputs. The CS5463 is a two-converter option supporting shunt or current-transformer inputs, with SPI communication and energy-pulse outputs. Comparing these features helps teams assess the fit with the sensor arrangement, host interface and output behavior required by the application.

These devices do not remove the need to design the surrounding measurement system carefully. Sensor selection, analog connections, host communication and the intended measured quantities all need to align with the chosen IC and the equipment’s functional requirements.

Audio processing from capture to playback

Audio is another part of the portfolio, covering the signal chain from microphone input to speaker or other audio output. The product guide groups components into categories including audio ADCs and DACs, codecs, smart codecs, audio DSPs and amplifiers. These devices are presented for applications across mobile, consumer, professional and automotive audio, rather than as a replacement for the dedicated industrial measurement families.

A codec combines conversion functions, while a smart codec can also include processing capabilities. Depending on the device, integrated features may include digital signal processing, microphone inputs, sample-rate conversion, headphone or speaker drivers, and audio interfaces. A separate DSP can provide processing for functions such as voice capture, noise reduction or playback enhancement. The CS48L32, for example, is described as a programmable, low-power voice-processing platform supporting up to four analog or digital microphone inputs and concurrent audio features such as voice-trigger detection and noise reduction.

For equipment with a voice interface or audio feedback, the design decision is not simply “which codec?” Engineers must consider the complete path: microphone and analog input requirements, conversion, processing, digital interfaces, output stage and acoustic tuning. Codec integration can consolidate functions, while separate components may be appropriate when the system requires a different mix of channels or processing.

Integration, software and development support

Hardware selection is only one part of an audio design. The product guide describes SoundClear software technology and an ecosystem of software and professional service partners that can support architecture, hardware and PCB design, software porting and integration, tuning, testing and validation. Partner competencies include embedded software, audio and acoustic design, mechanical design, and laboratory measurement services.

For system integrators and product teams, this support model highlights a practical consideration: audio performance depends on the interaction of the IC, board, software and physical product. Acoustic tuning and software integration may therefore need to be planned alongside component selection, rather than left until the end of development.

Applying the portfolio to a design

A disciplined selection process starts by defining the signal path and application requirements. Teams can then compare candidate devices using criteria such as:

  • Signal and measurement needs: input type, number of channels, required resolution and measurement throughput.
  • System integration: analog front-end needs, digital interfaces, host communication and available board space.
  • Power and operating conditions: device power consumption and the operating range specified for the candidate part.
  • Processing requirements: whether conversion alone is sufficient or the design also needs DSP functions, audio interfaces or output drivers.
  • Development resources: software, tuning, test and validation work needed to integrate the component into the end product.

Product specifications and availability can change, so engineers should confirm current device documentation and suitability before committing to a design.

Conclusion

Industrial measurement, energy monitoring and audio functions call for different signal-processing approaches, even when they sit within the same product portfolio. Delta-sigma ADCs support measurement conversion, energy measurement ICs combine electrical sensing and processing functions, and audio codecs and DSPs address capture, processing and playback. Matching the device family to the signal path—and planning interfaces, software and validation early—gives engineering teams a more grounded basis for component selection and system integration.

Access Official Technical PDF

About The Author