Access Official Technical PDF

Share Summary:LinkedInEmail

As processor speeds and power demands rise, decoupling design must account for the inductance of both the capacitor and its connection to the board or package. Low-inductance LGA capacitors offer an alternative to conventional multilayer ceramic capacitors (MLCCs) for applications where controlling effective series inductance (ESL) is important. Their land grid array construction pairs a two-terminal layout with a low-inductance design intended for demanding semiconductor and board-level applications.

Why low-inductance LGA capacitors matter

A capacitor’s usefulness for decoupling depends not only on its capacitance, but also on how its impedance changes with frequency. Inductance in the component and its mounting path can affect that behavior. The LGA family described by KYOCERA AVX is designed to provide low-inductance MLCC performance, including in applications operating at frequencies of 300 MHz or more.

The manufacturer positions its initial two-terminal LGA versions as delivering the performance of an eight-terminal interdigitated (IDC) low-inductance MLCC. The difference is in the termination and board interface: the LGA uses two large solder pads, rather than the eight smaller pads associated with an IDC. This can simplify the PCB land pattern and make the component easier to incorporate into a layout.

A two-pad layout and the PCB connection

The capacitor is only one part of the current path. The PCB or substrate connection can also contribute to system ESL, so the layout around the component remains an important design consideration. The LGA format provides an opportunity to use multiple parallel vias in the solder pads, which can reduce the PCB or substrate contribution to system ESL. The actual result depends on the implementation; the component’s low-inductance construction does not remove the need to consider the complete mounting path.

The larger, simpler pad arrangement also offers a practical contrast with eight-pad IDC layouts. During board design, engineers should use the recommended land pattern as a starting point and review the pad and via arrangement alongside the surrounding power-distribution and decoupling layout.

Assembly and solder-joint considerations

Component geometry and termination quality matter in surface-mount assembly as well as electrical design. The LGA products use an advanced FCT manufacturing process to create uniformly flat capacitor terminations. According to the product information, these terminations resist tombstoning and support better solder-joint reliability.

Tombstoning occurs when a surface-mount component lifts at one end during reflow rather than remaining seated on both solder pads. A termination designed to resist this assembly issue can be relevant where small components and tight layouts are used. It does not replace appropriate PCB land-pattern design or process control, but it is a characteristic worth considering when comparing component options.

Applications for LGA MLCCs

The stated application areas include semiconductor packages and board-level device decoupling. Semiconductor package examples include:

  • Microprocessors and CPUs
  • Graphics processors and GPUs
  • Chipsets
  • FPGAs
  • ASICs

For board-level decoupling, the product information identifies use cases involving frequencies of 300 MHz or more, ICs drawing 15 W or more, low voltages and high-speed buses. These are application indicators, not a substitute for evaluating the capacitor in the intended circuit. Engineers still need to match the component’s electrical and mechanical characteristics to the design requirements.

Choosing a size and electrical option

The family includes two case sizes: LG12 (0204) and LG22 (0306). The LG12 measures 0.50 mm by 1.00 mm, with a listed thickness of 0.50 mm. The LG22 measures 0.76 mm by 1.60 mm and has the same listed thickness. The product data gives dimensional tolerances, so designers should consult the full specification when checking fit, clearance and assembly constraints.

Available options vary by case size and include X5R, X7S, X6S and X7R temperature characteristics, with capacitance values listed from 0.010 μF to 2.200 μF across the family. Listed working voltages include 4 V, 6.3 V and, for specified options, 10 V. Not every combination is available in every size or temperature characteristic.

Selection should therefore start with the design’s required capacitance, working voltage and temperature characteristic, then verify that the desired combination is offered. The ordering code identifies details such as case size, capacitance, voltage, temperature characteristic, tolerance and packaging. The listed tolerance is ±20%, and the standard termination finish is 100% tin; other finishes require confirmation with the manufacturer.

Putting the component into the design

For engineers evaluating low-inductance LGA capacitors, the key is to consider electrical performance and implementation together. Confirm the required operating conditions and available part configuration, follow the recommended solder-pad dimensions, and assess how pad-level vias and the surrounding layout affect the current path. For package and board-level decoupling, this integrated review helps ensure the component choice aligns with both circuit needs and assembly constraints.

In practical terms, the two-pad LGA approach offers a simpler land pattern than an eight-terminal IDC while retaining the low-inductance performance described for the family. Its flat terminations and documented assembly considerations add further factors to compare during component selection. The best fit depends on the specific electrical requirements, layout and manufacturing process.

Access Official Technical PDF

About The Author