Access Official Technical PDF

Share Summary:LinkedInEmail

The MAXM86161 evaluation system gives engineers a configurable platform for assessing an integrated optical sensor in applications such as in-ear and mobile devices. It supports evaluation of optical performance, raw photoplethysmography (PPG) data, and selected heart rate and SpO2 algorithms. For product teams, the system offers a way to explore sensor settings and data flows before integrating the MAXM86161 into a custom design.

The evaluation setup combines the MAXM86161 optical module with a MAX32664 biometric sensor hub, a MAXSensorBLE board, an accelerometer, and PC GUI software. Data can be viewed in real time or logged for later analysis. Understanding how these elements work together helps engineers plan tests and interpret the results without treating the evaluation kit as a substitute for the complete device documentation.

What the MAXM86161 evaluation system includes

The primary system is made up of three circuit board assemblies: the MAXM86161OSBFLEX optical sensor board, the MAXSensorBLE microcontroller board, and a Cypress CY5677 Bluetooth Low Energy (BLE) dongle. The kit also includes a USB-C-to-USB-A cable and a lithium-polymer battery. Additional programming boards and a micro-USB cable are supplied for firmware updates if needed.

The optical module has three individually controlled readout channels associated with green, red, and infrared (IR) illumination. It communicates over an I2C-compatible interface with the on-board MAX32664 biometric sensor hub. Engineers can use the hub to evaluate supported Maxim algorithms, or select a pass-through approach for collecting raw sensor data. An on-board accelerometer adds motion data to the evaluation workflow.

Power can be provided through USB-C or the integrated battery. The accompanying PC application provides configuration controls, plots, register access, algorithm options, and data-logging functions. Its GUI exposes a subset of MAXM86161 features; the device data sheet remains the reference for the full feature set.

Configuring optical measurements and sampling

The GUI’s Settings tab lets users configure PPG acquisition, including sample rate, averaging, integration pulse width, LED sequence, and LED current. These controls affect how measurements are collected and what tradeoffs are made between signal quality, output rate, and power use.

Balancing signal quality and output rate

The MAXM86161 supports sample averaging from one to 128 samples. Averaging can improve signal-to-noise ratio (SNR), but it reduces the rate of output data. For example, the system documentation describes a 100-samples-per-second setting with an average of four as producing an output rate of 25 samples per second. This can be useful when evaluating low-amplitude PPG signals, while the reduced output rate should be considered when choosing a test configuration.

Integration pulse width is another important tradeoff. Supported exposure times range from 14.8 microseconds to 117.3 microseconds. Longer exposures can produce higher SNR, but increase power consumption because the LEDs and analog-to-digital converter remain active for longer. The appropriate setting depends on the measurement conditions and evaluation priorities.

Sample-rate limits also depend on the number of exposure sequences and whether the accelerometer is enabled. The evaluation system documentation notes that the maximum supported rate can be limited by BLE throughput rather than the analog front end itself. This distinction matters when interpreting acquisition limits: the data-transfer path can constrain the demonstration setup even when the sensor’s own capabilities differ.

Sequencing LEDs and managing ambient light

LED sequence controls define which optical exposures are made and how converted results are mapped into the FIFO. The default sequence uses green, IR, and red exposures in succession. Users can change the sequence to examine different channel combinations and view available PPG plots in the GUI.

The sensor includes ambient light cancellation to reduce photodiode current caused by surrounding light. A separate picket fence function is intended to address unusually rapid changes in ambient illumination, where the ambient-light estimate may otherwise be inaccurate. Proximity configuration is also available, supporting evaluation of optical proximity behavior that can help manage operation when the sensor is not in contact with skin.

Evaluating algorithms and motion data

The Algorithm tab offers Raw, Heart Rate, and SpO2 modes. Raw Mode is the default and leaves the algorithm-specific controls inactive. Selecting a supported algorithm mode enables its corresponding configuration options. In Heart Rate Mode, users can examine settings such as automatic exposure control, motion threshold, minimum photodiode current, target-current period, and skin-contact detection.

Automatic exposure control adjusts parameters including LED current, photodiode current, integration time, and sample averaging to pursue higher SNR while maintaining minimal power consumption. The accelerometer can be enabled or disabled, with selectable full-scale ranges of ±2g, ±4g, and ±8g. It provides motion information alongside optical measurements; the GUI can display accelerometer plots for review.

SpO2 Mode provides continuous, one-shot, and calibration options, as well as controls for timeout, automatic gain control, and motion detection. These features let engineers investigate the available algorithm configuration paths. Results should be interpreted as evaluation output, not as evidence of performance in a finished application.

Collecting, inspecting, and exporting data

Once connected, users start acquisition from the GUI and can view streaming PPG and accelerometer plots. The Settings tab also supports real-time viewing and data logging over I2C or BLE. During acquisition, settings are locked; stopping the monitor is necessary before changing them. The Reset control restores the program’s default settings.

Logging can write data to a PC file or to the system’s flash memory. Flash logging stores raw sensor data in binary format, and its maximum duration depends on sample rate, the number of optical channels, and accelerometer use. The GUI can be disconnected during flash logging, although plots are then unavailable. To retrieve a completed flash log, connect the system to a PC using USB-C and copy the binary file; it cannot be downloaded over Bluetooth.

The GUI includes a BIN-to-CSV parser for converting a downloaded binary log into a CSV file. The output includes capture timing, configuration-related information, raw data, elapsed time, dropped-packet count, and incorrect-tag count. These fields help users review acquisition integrity as well as the sensor readings. Because the output columns depend on the selected channels and accelerometer configuration, teams should record the setup used for each capture.

Practical implications for engineering teams

The MAXM86161 evaluation system brings sensor configuration, algorithm options, motion sensing, real-time plots, and file-based data review into one development platform. A productive evaluation begins with a defined objective: assess a channel sequence, examine the effect of averaging or integration time, inspect motion-related data, or test a logging workflow. Keeping configurations and capture conditions consistent makes comparisons more useful.

For system integrators and product engineers, the central value is visibility into the measurement chain—from optical exposure and sensor settings through data transfer and algorithm output. Use the GUI to explore supported options, use logging to preserve raw data for analysis, and consult the MAXM86161 data sheet for complete device behavior. Together, these practices provide a clearer basis for deciding how the optical module may fit into a larger design.

Access Official Technical PDF

About The Author