Access Official Technical PDF

Share Summary:LinkedInEmail

Adding small cells can bring radio access closer to users, but every access point also needs a reliable path to the wider network. In dense urban areas, installing optical fibre at every location may be difficult or costly, while conventional spectrum below 6 GHz faces growing capacity and interference pressures. Millimeter-wave backhaul offers one way to connect small cells wirelessly, provided the network can manage the short-range characteristics and directional nature of these links.

The European MiWaveS project explored technologies for millimeter-wave access and backhaul in heterogeneous networks. Its work offers a useful engineering perspective on the connected challenges: radio planning, antenna placement, beam management, hardware integration and network-level coordination.

Why millimeter-wave backhaul for small cells?

Millimeter-wave systems can use frequency bands with substantial bandwidth. MiWaveS focused on the V band from 57 to 66 GHz for access, and on V band or E band from 71 to 86 GHz for backhaul. The project considered small cells in settings such as urban streets, large public events, indoor coverage, rural communities and shopping malls.

In these scenarios, wireless backhaul can connect an access point to another network node where a fibre connection is unavailable or impractical. It can also support multi-hop layouts, in which traffic passes through a sequence of small-cell nodes. The access and backhaul links must be planned together: adding radio capacity at the user-facing edge does not solve the problem if the path carrying aggregated traffic toward the core network is undersized or unreliable.

MiWaveS set system targets that included peak mobile access rates up to 5 Gbps and aggregate backhaul capacity above 10 Gbps. These were project objectives, not a guarantee that every deployment would achieve those rates. Actual link performance depends on conditions such as distance, line of sight, antenna gain, bandwidth and radio configuration.

Engineering around high path loss

The central radio challenge is the higher path loss at millimeter-wave frequencies compared with legacy cellular bands. As a result, high-gain antennas are important for achieving useful coverage and link quality. Directional antennas can concentrate energy toward the intended receiver, but they also make connection establishment more demanding: the endpoints need to find and maintain a suitable beam as users or network conditions change.

MiWaveS therefore investigated beam steering and beam switching for both access and backhaul. For practical reasons—including cost, power consumption, complexity and device size—the project’s design approach placed adaptive, high-gain antennas primarily at the access point rather than requiring them in user equipment. User terminals were designed around compact, closely integrated transceiver and antenna modules with fixed-beam antennas. Some beam-alignment demonstrations used off-the-shelf beam-switching devices at both ends.

For longer backhaul distances, the project explored antenna options including Rotman-lens arrays, continuous transverse stub (CTS) antennas, phased arrays and lens antennas. The report identifies lens antennas as a way to achieve the gain needed for links between backhaul nodes, with designs including a 3D-printed plastic lens and a planar electronic transmitarray. These approaches illustrate a practical design trade-off: antenna gain, beam flexibility, cost, size and manufacturing complexity all influence equipment choices.

Beam alignment and network coordination

Directional links require procedures for discovering a connection and aligning the transmitting and receiving beams. An exhaustive search can become time-consuming when each endpoint has many possible beams. MiWaveS developed and evaluated alternative alignment methods, including iterative and gradient-based approaches, with the aim of reducing the search effort while maintaining link performance in the simulated scenarios.

Beam management is only one part of operating a heterogeneous network. Traffic routing, link scheduling and radio-resource management must account for changing link conditions, congestion and quality-of-service requirements. The project examined both LTE-assisted establishment—using the conventional cellular network to support initial connection procedures—and standalone millimeter-wave backhaul arrangements. For standalone mesh backhaul, its work included self-organization, load balancing and fast rerouting concepts intended to help the network respond to link failures.

These methods point to an important systems-level requirement: radio links cannot be optimized in isolation. The network needs to coordinate beam selection with frequency and user scheduling, routing and latency constraints. The choice of centralized or distributed management also affects computational and hardware complexity.

Integration, power and deployment considerations

Small-cell equipment must fit its intended environment and operating constraints. MiWaveS developed transceiver and antenna building blocks using CMOS and BiCMOS technologies, alongside low-loss LTCC and liquid-crystal polymer (LCP) platforms for millimeter-wave front ends. Integrating antennas closely with the radio can reduce interconnection losses and help address size and energy-efficiency requirements, particularly for user devices.

Backhaul radios face a different set of priorities. They need sufficient output power for longer links and low phase noise and adequate linearity to support higher-order modulation schemes. The project’s component work also examined power amplifiers and frequency synthesizers. These are not merely component-level concerns: their performance influences achievable link capacity, efficiency and the feasibility of a compact radio design.

Deployment planning should begin with the use case and link budget, not simply with a target data rate. Relevant considerations include line-of-sight conditions, cell and backhaul distances, antenna gain, available bandwidth, number of backhaul hops and latency needs. MiWaveS used scenario-based specifications and tested a subset of developed components with real-time digital baseband equipment in indoor and outdoor trials.

Practical implications for automation and network teams

For industrial and infrastructure teams evaluating dense wireless coverage, the project’s findings reinforce several planning principles:

  • Design access and backhaul together. Confirm that the backhaul can carry the traffic generated by the access points.
  • Include beam management in the architecture. Directional links need practical procedures for discovery, alignment and recovery.
  • Match antenna and radio choices to the link. User access and longer backhaul connections can require different gain, size and integration trade-offs.
  • Plan around real site conditions. Distance, obstructions, latency and the number of relay hops affect whether a proposed topology is suitable.

Millimeter-wave backhaul is not a universal replacement for fibre or lower-frequency wireless links. It is an option for connecting small cells where the capacity need, site conditions and radio design align. MiWaveS demonstrates the breadth of engineering work involved—from antennas and transceivers to beam procedures and routing—and the practical lesson for decision-makers: successful deployment depends on treating the radio link and the wider network as one coordinated system.

Access Official Technical PDF

About The Author