Access Official Technical PDF

Share Summary:LinkedInEmail

Millimeter wave communication uses high-frequency spectrum to support wireless links with substantial bandwidth, making it a candidate for high-capacity 5G access and backhaul. For industrial automation engineers and operations leaders, its relevance lies in how it may complement existing network infrastructure—not in replacing every wired or lower-frequency connection. Understanding its bandwidth advantages alongside its range, obstruction, and implementation constraints is essential when evaluating where this technology may fit.

What millimeter wave communication means

The millimeter wave band spans approximately 30 to 300 GHz, corresponding to wavelengths from about 10 to 1 millimeter. The 60 GHz band is a prominent example. Its broad spectrum can accommodate high data rates over wireless links, including multi-gigabit connectivity in suitable conditions.

That capacity is one reason millimeter wave has been considered for 5G networks. Increasing mobile data demand has put pressure on available wireless bandwidth, and wider channel allocations can help support higher transmission rates. The same characteristics make millimeter wave an option to consider for short-range links and connections between network sites.

High frequency also affects system design. Because wavelengths are short, antennas and other radio-frequency components can be compact. Directional antennas can focus transmission toward a receiver, helping establish a usable link and limiting unwanted signal spread. This approach depends on maintaining an appropriate path between the transmitting and receiving equipment.

Why 60 GHz attracts attention

The 60 GHz band is associated with several gigahertz of available bandwidth in the regulatory frameworks described in the technical literature. A wide allocation can support high-capacity wireless transmission. In some regions, portions of the band have been made available for unlicensed use, although the permitted frequencies and power limits differ by jurisdiction.

That variation matters for network planners. The frequency range, operating conditions, and equipment rules cannot be assumed to be identical worldwide. Any deployment must be assessed against the relevant local regulations and standards rather than relying on a general description of the band.

Propagation is another important part of the decision. Millimeter wave signals experience greater path loss than signals at lower microwave frequencies, and obstacles can attenuate them significantly. Buildings, materials such as brick, and even people may weaken a link. Rain and atmospheric absorption can also affect transmission, particularly over longer paths. At 60 GHz, oxygen absorption is a notable factor in propagation; the practical impact depends on distance and the link environment.

These characteristics help explain why millimeter wave is generally discussed for relatively short links and carefully planned coverage rather than as a simple substitute for longer-range wireless systems. Attenuation can also limit interference between nearby systems and make frequency reuse more practical, but network design must account for the same attenuation as a constraint.

Millimeter wave communication: generation and transport

One way to distribute high-frequency radio signals is radio-over-fiber (RoF), which carries radio signals over optical fiber to a remote radio location. Fiber’s low loss and broad bandwidth make it useful for transporting signals between network equipment and a radio endpoint. Several methods can generate or carry millimeter wave signals in an RoF system.

Direct and external modulation

With direct intensity modulation, a laser’s output is modulated with the signal, which is then recovered using a photodiode. The approach is limited by the laser’s modulation bandwidth, making it less suitable when the required radio frequency exceeds that capability.

External modulation instead uses a continuous-wave laser and a separate optical modulator, such as a Mach-Zehnder modulator. This can support the generation of higher-frequency signals, but the arrangement may introduce insertion loss, distortion from modulator nonlinearity, and fiber-dispersion effects. The specific system design determines how these trade-offs are managed.

Conversion and optical heterodyning

Another approach transports an intermediate-frequency signal over fiber and performs frequency conversion at the base station. This can reduce the bandwidth required on the optical link and limit dispersion concerns, but it requires frequency-conversion equipment and a millimeter wave local oscillator at the remote site.

Optical heterodyning combines optical signals at a photodetector to produce a higher-frequency electrical signal. Its potential benefits include high link gain and carrier-to-noise ratio, while a key challenge is phase noise from the optical sources. These methods illustrate that moving a millimeter wave signal through a network involves optical and RF design choices, not just a radio link.

Potential roles in access and backhaul

Two network uses commonly associated with millimeter wave are small-cell access and wireless backhaul. Small-cell access can add capacity in targeted coverage areas, while 60 GHz and E-band links may provide high-rate connections between small-cell base stations or between a base station and a gateway.

For industrial decision-makers, these are network-infrastructure possibilities rather than assurances of performance in a particular plant. Site layout, line of sight, obstructions, local spectrum rules, and the required link distance all influence whether a proposed connection is suitable. Directional transmission can help focus energy and reduce interference, but it makes alignment and path planning important.

Practical considerations for deployment

Before considering a millimeter wave link, technical teams should evaluate:

  • Path and obstructions: Identify whether a clear transmission path can be maintained and what structures or moving objects could block it.
  • Distance and weather exposure: Account for signal attenuation and the effects of rain or atmospheric absorption, especially on outdoor links.
  • Regulatory conditions: Confirm the permitted band and operating limits for the deployment location.
  • Radio and optical architecture: Compare direct modulation, external modulation, frequency conversion, and optical heterodyning in light of the system’s requirements.
  • Energy and equipment trade-offs: Consider directional-link benefits alongside the hardware demands of operating at higher frequencies.

Millimeter wave’s wide bandwidth does not remove the need for robust encoding and decoding or careful link engineering. The technology’s capacity is most useful when the radio path and supporting equipment are designed around its operating characteristics.

Conclusion: match capacity to the link environment

Millimeter wave communication offers a way to use broad spectrum for high-capacity wireless access and backhaul, with 60 GHz among the bands of interest. Its compact components and directional transmission can be advantageous, while path loss, obstruction sensitivity, weather effects, and differing regulations limit where and how it should be deployed. For automation and network teams, the practical takeaway is to assess millimeter wave as a targeted connectivity option: define the required capacity, examine the physical path, and validate the radio-over-fiber and regulatory choices before selecting it for a network design.

Access Official Technical PDF

About The Author