Access Official Technical PDF

Share Summary:LinkedInEmail

Mn2CoAl has attracted interest as a potential spintronic material because ideal band-structure calculations predict a spin-gapless semiconductor: a material with a zero-width gap for one spin channel and a gap in the other. That electronic structure could support highly spin-polarised carriers. However, the predicted state depends on maintaining the right composition and atomic arrangement. Studies of Mn2CoAl disorder in sputtered thin films indicate that departures from this ideal can substantially change how the material conducts.

Measurements of structure, magnetotransport and optical response point to a consistent interpretation: the as-prepared films behave more like disordered metals than spin-gapless semiconductors. This distinction matters when assessing material properties for spintronic applications, because the ideal calculated structure cannot be assumed from the chemical formula alone.

Why atomic order matters in Mn2CoAl

Mn2CoAl belongs to the Heusler family of compounds. In the ideal inverse Heusler structure, four interpenetrating face-centred cubic sublattices are occupied by two groups of manganese atoms, cobalt and aluminium. The predicted spin-gapless behaviour depends on the electronic bands formed by these atoms and on preserving their intended arrangement.

Atomic disorder can arise when atoms occupy sites intended for different elements, a condition known as antisite disorder. Composition can also deviate from the ideal ratio. Calculations that account for these defects show that disorder can fill the zero-width majority-spin gap with electronic states, removing the spin-gapless condition. In the calculations discussed in the study, the minority-spin channel retains a gap, meaning that disorder can instead leave a half-metallic electronic structure.

Establishing the degree of order experimentally is not straightforward. X-ray diffraction (XRD) can identify structural features, but Heusler structures with similar atomic numbers can be difficult to distinguish, and disorder can obscure the reflections used to confirm ordering. Magnetisation provides another useful indicator, since the magnetic moment is also sensitive to atomic swaps and composition.

What the thin-film measurements show

The investigated films were deposited by DC magnetron sputtering on magnesium oxide substrates. XRD showed reflections consistent with oriented Mn2CoAl growth, but not the superlattice reflection expected for an ideally ordered inverse Heusler or regular Heusler structure. Energy-dispersive X-ray analysis found a composition of Mn1.7Co1.2Al1.1, indicating that the films were manganese-deficient.

The measured saturation magnetisation at 10 K was about 1.02 Bohr magnetons per formula unit, roughly half the value expected for ideal Mn2CoAl. The study’s comparison with calculations suggests that the measured composition and a modest level of additional atomic swaps could account for the reduced moment. Taken together, the structural, compositional and magnetic results support the presence of disorder in the films.

Electrical transport provides further evidence. At room temperature, resistivity was approximately 200 micro-ohm centimetres. Between 4 and 400 K, it had a small, negative temperature coefficient: resistivity decreased as temperature increased. The Hall-effect data, combined with conductivity, gave a mean free path below 1 nanometre, on the order of a lattice spacing, and a Hall mobility of about 2 square centimetres per volt-second.

These values are consistent with strongly scattered carriers. Rather than travelling through the film without frequent interruption, electrons undergo diffusive transport and can interfere with waves scattered along different paths. In a disordered metal, this quantum-interference effect can increase backscattering and reduce conductivity. It is known as weak localisation.

Weak localisation and magnetotransport

The measured conductivity from 4 to 400 K was well described by a weak-localisation model. In this interpretation, elastic scattering from disorder remains important, while temperature-dependent inelastic scattering reduces the phase coherence of the carriers. As temperature rises, the localisation correction weakens and conductivity increases, matching the observed trend.

The magnetoresistance measurements add context. The films showed a small negative magnetoresistance, including a sharp dip around zero applied field, with a magnitude that changed only modestly across the measured temperatures. The authors identify this behaviour as consistent with weak localisation in a ferromagnetic material with strong scattering and spin-orbit effects. Similar magnetotransport patterns have been reported for many Mn2CoAl films, alongside comparable resistivities and small negative temperature coefficients.

That consistency does not, by itself, establish that all samples have identical structures or levels of disorder. Rather, it makes disorder an important factor when interpreting their transport data. The study also notes that bulk samples have shown different magnetoresistance behaviour, underscoring that sample preparation and structural condition can influence the observed response.

Optical response supports the transport picture

Reflectivity measurements, covering the infrared through ultraviolet range, provide an independent check on carrier scattering. The optical response was modelled using a Drude contribution for free carriers, alongside terms for phonons and higher-frequency electronic transitions. The Drude component was prominent and required a high scattering rate of roughly 1014 per second.

That scattering rate was similar to the value inferred from DC conductivity and Hall measurements. The optical model’s zero-frequency conductivity was also reasonably close to the measured DC conductivity. Agreement between these different measurement approaches strengthens the case that intense scattering and disorder are central to the films’ electronic behaviour.

Implications for interpreting Mn2CoAl

For engineers and technical decision-makers evaluating emerging materials, the practical lesson is that predicted properties depend on the material actually produced. A nominal Mn2CoAl composition does not guarantee the ideal atomic ordering required for spin-gapless behaviour. Characterisation should therefore consider multiple indicators, including diffraction, composition, magnetisation and transport, rather than relying on any one measurement alone.

In the films examined, those indicators converge on a picture of a disordered metal with weak localisation, consistent with calculations that explicitly include compositional and antisite disorder. This does not rule out the possibility of achieving different behaviour in more ordered material. It does mean that claims about spin-gapless performance should be tied to evidence of the relevant structure and electronic properties in the specific sample.

Conclusion

Mn2CoAl’s proposed spin-gapless state is sensitive to atomic order and composition. In the sputtered thin films studied, missing superlattice reflections, manganese deficiency, reduced magnetisation, short carrier mean free path and strong optical scattering collectively support a disordered-metal interpretation. For material development and evaluation, controlling and verifying atomic order is essential to connecting theoretical predictions with measured performance.

Access Official Technical PDF

About The Author