Access Official Technical PDF

Share Summary:LinkedInEmail

A nanofabrication facility can help engineering teams move from device concepts to process development and physical prototypes. The NCSU Nanofabrication Facility (NNF) at NC State provides a shared cleanroom environment and a broad set of semiconductor processing and characterization capabilities for researchers across science and engineering. Its equipment and staff support work ranging from lithography and thin-film deposition to etching, thermal processing and measurement.

For industrial automation and technology organizations, this kind of facility can be relevant when a project requires specialized fabrication equipment, process knowledge or early-stage device development that is not available in a standard production environment. NNF also emphasizes user training, teaching laboratories and a community that includes academic, government and industry participants.

What the NCSU Nanofabrication Facility offers

NNF operates Class 100 and Class 1000 cleanroom spaces and supports processing on semiconductors, ceramics, plastics and glass. Work can use small substrate pieces through wafers up to six inches, depending on the process and equipment. This range gives users options for research and prototyping across different material systems and device formats.

The facility’s process areas include photolithography and electron beam lithography, wet and dry etching, chemical vapor deposition (CVD), atomic layer deposition (ALD), physical vapor deposition, thermal processing and metrology. Access to multiple process steps in one facility can help teams evaluate a device flow without treating each fabrication operation as an isolated capability.

Nanofabrication facility capabilities across the process flow

Patterning and lithography

NNF offers contact and projection photolithography, direct-write laser lithography and direct-write electron beam lithography. The tools support different patterning needs, from mask-based processing to direct writing. The facility lists electron beam feature sizes down to 20 nm, while its photolithography equipment supports larger feature scales. A nanoimprinter is also available for patterning nanostructures, offering a separate approach to creating features without relying solely on optical or electron-beam exposure.

For engineers planning a process, the choice of patterning method depends on the required geometry, substrate and project objectives. The facility’s equipment range makes it possible to consider different approaches within a shared research environment, with staff available to provide equipment-operation training.

Deposition, etching and thermal steps

Thin-film options include ALD, low-pressure CVD, electron-beam and resistively heated metal evaporation, and DC sputtering. NNF’s ALD capability includes oxides such as aluminum oxide, hafnium oxide and silicon dioxide, as well as nitride materials. The facility describes ALD as a conformal deposition process, which can be useful when a project calls for coating complex structures.

Plasma etching capabilities cover a variety of process gases and materials. Dedicated systems support processes including Bosch deep reactive ion etching (DRIE), silicon etching and III-V material etching. The facility identifies applications such as high-aspect-ratio etching and processing for GaN-based structures. These capabilities are complemented by wet and dry etch processes listed in the facility’s overall service range.

Thermal processing includes rapid thermal annealing, oxidation and doping processes. The rapid thermal processing system operates across a stated temperature range of 250 to 1,300°C, with pressure control from vacuum to atmospheric pressure and several gas options. These process steps can be important elements in developing and evaluating semiconductor devices and materials.

Measurement and characterization

Fabrication is only part of the development cycle. NNF provides tools for examining surface profiles, film properties and electrical behavior. Available metrology includes optical and contact profilometry, optical microscopy, ellipsometry, four-point probe measurements and a Nanometrics metrology system. Electrical and thermal characterization tools are also available, including a probe station and semiconductor parameter analyzer.

Using characterization alongside fabrication can help teams assess whether a process produces the intended structures or properties. The specific measurement approach will depend on the material, device and question being investigated.

Training and collaboration as part of facility access

NNF’s role extends beyond equipment access. Experienced staff provide personalized training on equipment operation, while teaching laboratories support undergraduate and graduate courses. The facility also provides infrastructure for design projects, workshops, tours and research experiences.

This combination can be valuable for organizations and individual researchers that need to build process familiarity as well as complete fabrication work. Users have described applying their facility experience in academic careers, entrepreneurship and semiconductor industry roles. These accounts illustrate the facility’s educational role, but project requirements and outcomes will vary by user.

NNF is also a member of the Research Triangle Nanotechnology Network and the National Nanotechnology Coordinated Infrastructure. Its community includes participants from academia, government laboratories and industry, creating opportunities for technical interaction across different research and development settings.

Assessing fit for a project

Before selecting a shared nanofabrication resource, project teams should map their needs to the available processes and equipment. Useful questions include:

  • Which substrate material and sample dimensions are required?
  • What patterning method and feature scale does the design call for?
  • Which deposition, etch and thermal steps are part of the proposed process?
  • What measurements are needed to evaluate the fabricated device or film?
  • What equipment training or staff guidance will users need?

Because process compatibility depends on materials, equipment and the full fabrication sequence, teams should confirm specific requirements with facility staff before planning work.

Conclusion

The NCSU Nanofabrication Facility brings together cleanroom access, a broad semiconductor process toolkit, characterization equipment and hands-on training. For engineers, researchers and technology developers, that combination can support device research, process exploration and prototyping across a range of substrates. The practical next step is to match the project’s materials, dimensions and process sequence to the facility’s capabilities and confirm details with its staff.

Access Official Technical PDF

About The Author