Off-grid solar system design is a balancing exercise: photovoltaic (PV) generation and battery storage must meet demand despite variable solar availability, while keeping investment proportionate to the required level of service. For engineers, system integrators and project decision-makers, reliability is not determined by panel capacity alone. Load patterns, storage sizing and expected demand growth all influence how often a mini-grid can supply energy.
A case study of the Chalokwa energy kiosk in rural Zambia illustrates how to compare design alternatives using measured load and solar-production data. Its results offer a practical way to think about reliability when an existing stand-alone PV system approaches an upgrade point.
Why reliability is a design challenge for solar mini-grids
Remote communities may be costly or impractical to connect to a national grid, making an off-grid system a relevant option. Solar PV can provide electricity without relying on a grid connection, but its output varies with available sunlight. Generation therefore does not necessarily coincide with demand, particularly after sunset or during periods of lower solar production.
Battery storage helps shift available energy to times when the PV array cannot meet the load. It does not, however, guarantee uninterrupted supply: reliability depends on whether the combination of generation and usable stored energy can meet demand over the period being evaluated.
A typical stand-alone PV mini-grid brings together several components:
- PV array: Converts sunlight into DC electrical power.
- Charge controller: Regulates charging and helps protect the battery from overcharging and excessive discharge.
- Battery bank: Stores energy for use when PV production is insufficient.
- Inverter: Converts DC power to AC for compatible loads.
These components must be considered as a system. The array, storage and power electronics all affect how much energy can be delivered and when.
Off-grid solar system design: sizing around demand
Load assessment is the foundation of system sizing. Designers need to understand both total energy consumption and how demand varies over time. A daily or seasonal profile can reveal periods when the system is most likely to face a shortfall. Peak power also matters, since the inverter must be selected to serve the connected loads.
Battery capacity is another important design choice. A larger bank can provide more stored energy, but capacity should be considered alongside the intended operating conditions and the PV array’s ability to recharge it. The source study examined lead-acid battery design and recognized that discharge depth affects battery life. Its analysis also assumed a five-year battery life for the upgrade planning scenario.
On the generation side, PV array sizing must account for solar availability and system losses as well as the load. The case study used all-sky insolation on a horizontal surface for its calculations and noted this as a design assumption. Actual system design must be grounded in the conditions and component choices relevant to the project site.
What the Chalokwa case study found
The Chalokwa mini-grid, located in southern Zambia, had an initial configuration of a 2.4 kW PV array and a 10 kWh battery bank. The study used data from the installed system and applied a design method based on IEEE standards to assess the existing arrangement and consider upgrade options.
Two scenarios were analyzed. The first examined a design for the system’s current demand. The second considered future expansion, assuming consumption increased by 5% per year over the next five years. The resulting designs were:
- Current-demand scenario: 2.6 kW of PV capacity and 19 kWh of battery capacity.
- Growth scenario, first alternative: 3.12 kW of PV capacity and 19 kWh of battery capacity.
- Growth scenario, second alternative: 3.36 kW of PV capacity and 19 kWh of battery capacity.
The alternatives were then evaluated with an energy management algorithm in MATLAB. The analysis tracked energy deficits and surpluses. A deficit represents demand that the system could not supply during the period assessed, providing an input for calculating Loss of Power Supply Probability (LPSP).
Using LPSP to compare reliability
LPSP is a reliability indicator used in the study to assess the availability of alternative system designs. In practical terms, it relates to the likelihood or proportion of supply shortfall represented by unmet demand over the evaluated period. A lower reported LPSP indicates fewer deficits in that analysis, but it should be interpreted within the assumptions and time period used—not as a guarantee of performance under every future condition.
The study reported an LPSP of 13.8% for the initial system. The current-demand design reduced the result to 6%. Under the assumed 5% annual demand growth, the 3.12 kW PV alternative had an LPSP of 11%, while the 3.36 kW alternative had an LPSP of 4%.
These results show why demand assumptions matter. If consumption remains constant, the 2.6 kW PV and 19 kWh battery design was identified as the suitable alternative. If demand grows as assumed and higher reliability than the current system is required, the 3.36 kW PV and 19 kWh battery option provided the best reliability result among those compared.
Reliability must be weighed against cost
The design with the lowest LPSP is not automatically the best project decision. Greater PV capacity can improve the modeled reliability result, but system cost must also be considered. The study emphasizes the trade-off between investing in a more reliable individual installation and using available resources to implement more systems.
For project teams, this means treating reliability as one decision criterion alongside life-cycle cost and the intended service level. A design process can be strengthened by:
- Using measured load and generation data where available.
- Making demand-growth assumptions explicit and testing alternatives.
- Evaluating battery capacity and PV capacity together.
- Comparing unmet demand and LPSP across candidate designs.
- Assessing reliability improvements against the cost of the selected configuration.
Conclusion: design for the expected operating future
The Chalokwa analysis demonstrates that off-grid solar system design depends on more than choosing a PV array and battery bank large enough for present-day consumption. Demand trajectories change the relative value of design alternatives, while energy management analysis provides a structured way to compare their reliability. For engineers and decision-makers, the practical step is to align load data, growth assumptions, storage and generation sizing, and cost evaluation before selecting an upgrade. That approach helps make reliability requirements clear without losing sight of the resources available to serve the wider community.