Access Official Technical PDF

Share Summary:LinkedInEmail

Organic Class Y SiP technology brings system-in-package integration to non-hermetic packaging for demanding space applications. Its development addresses a practical engineering challenge: combining devices with different functions and manufacturing technologies in a compact package while establishing evidence for long-term reliability. A 2018 development program examined fine-pitch flip-chip assembly on organic substrates, advanced interposer-based integration and physics-of-failure modeling for solder fatigue.

For engineers and program teams, the work illustrates why package development involves more than increasing interconnect density. Test vehicles, assembly processes, environmental testing and analytical models all contribute to assessing whether a package approach is suitable for a high-reliability application.

Where organic Class Y SiP fits on the packaging roadmap

System-in-package (SiP) technologies integrate multiple devices within a package. They can combine homogeneous devices or components made using different technologies. The packaging roadmap described in the development program spans conventional approaches, including wirebonded and ceramic packages, through fine-pitch flip chip on organic substrates and more advanced 2.1D, 2.5D and 3D integration.

Organic Class Y packaging is a non-hermetic approach positioned for advanced integration in space applications. Compared with a basic flip-chip-on-organic ball grid array, a 2.1D SiP uses an advanced organic build-up substrate with finer lines and spaces to connect multiple die. Copper-pillar flip-chip interconnects connect the die to the substrate, while a ball grid array provides the second-level connection.

How 2.1D, 2.5D and 3D SiP differ

2.1D: integration through an organic substrate

In a 2.1D package, the organic substrate provides the routing platform for integrating multiple devices. The approach increases integration density relative to conventional flip chip on organic BGA packaging, while allowing multiple die to be connected through the substrate. Fine-pitch routing and copper-pillar interconnects are important elements of this architecture.

2.5D: an interposer between devices and substrate

A 2.5D SiP uses an interposer, typically silicon or glass, to provide a high-density platform for connecting devices. This arrangement can support partitioning a system into discrete components fabricated using different technologies, allowing functionality and manufacturing yield to be considered at the device level. Short interconnects across the interposer—for example, between memory and logic—can reduce parasitics, power and package size while supporting higher speed. Copper pillars and micro-bumps are used for flip-chip connections.

3D: stacking die

Three-dimensional SiP takes integration further by stacking die and using through-silicon vias (TSVs) for vertical interconnection. It provides a high-density package-level integration approach, including connections among stacked die. The 2018 development effort focused particularly on establishing a reliability foundation for 2.1D and 2.5D solutions.

Evaluating fine-pitch flip chip on organic

A collaborative development effort with NASA’s NEPP program and JPL evaluated fine-pitch flip-chip-on-organic technology for high-reliability and space applications. The work included test-vehicle design, assembly-process development and reliability assessments. The test die used 150-micrometer I/O pitch, with 40-micrometer copper-pillar bumps and 25-micrometer eutectic tin-lead solder caps. Test die sizes were 10 by 10 millimeters and 20 by 20 millimeters.

The organic high-density build-up test substrate was dual-sided and 1.0 millimeter thick, with four sites for 10-by-10-millimeter die or one site for a 20-by-20-millimeter die. Assembly development included evaluating flux and underfill materials, refining the copper-pillar flip-chip process and checking underfill quality. Cross-section inspection showed solder-joint wetting and formation; acoustic inspection of a 10-by-10-millimeter assembly detected no underfill voids.

Reliability assessments included temperature cycling, high-temperature storage and multiple reflow exposures. For underfilled 10-by-10-millimeter assemblies, the reported results included:

  • Temperature cycling: At -55°C to 125°C, no failures had been detected through 4,500 cycles at the reporting point; testing was planned to continue to 5,000 cycles. Analysis after 4,000 cycles found no underfill delamination or voids, with solder grain coarsening noted.
  • High-temperature storage: No failures had been detected after 2,500 hours at either 125°C or 150°C at the reporting point. Inspections found no underfill delamination. Some void evidence was noted after 125°C storage, while none was reported after 150°C storage.
  • Multiple reflow: No failures were detected after 10 reflow exposures.

These are results from the stated test conditions and reporting period; they should not be read as a universal qualification claim for every design or application.

Building a 2.5D reliability baseline

A separate SiP development effort aimed to establish a baseline for designing, fabricating and assembling high-reliability packages using 2.5D interposer technology. Test vehicles included silicon interposers with daisy-chain sites at 50, 100 and 150 micrometers, fine-pitch test die, and organic substrates. The proposed assembly sequence connected flip-chip test vehicles to a silicon interposer and then attached the interposer assembly to an organic substrate.

This staged approach helps teams examine the interconnects and assembly interfaces that make up the full package. It also makes feasibility demonstrations and preliminary reliability assessments possible before broader technology implementation.

Using physics-of-failure models carefully

Temperature cycling can drive solder fatigue because materials in an assembly expand and contract differently as temperature changes. The development work used assemblies without underfill and mild temperature profiles to confirm solder fatigue in copper-pillar interconnects. Those results were then considered alongside finite-element analysis and solder-fatigue correlation.

The modeling approach used a modified Coffin-Manson relationship to adjust test results toward use conditions and a two-parameter Weibull distribution to characterize wearout. In this framework, the Weibull slope describes the distribution of failures, while Weibull life is the cycle count at which cumulative failures reach 63.2%. The reported predictions depended on specified assumptions, including temperature range, cycling frequency, acceleration factor and target life. They are model-based estimates, not direct demonstrations of service life.

Practical implications for packaging teams

Organic Class Y SiP development is a system-level reliability task. Higher-density routing and interposer architectures create integration options, but they also make careful test-vehicle design, process control and evaluation of each interconnect essential. For engineering teams, the 2018 program provides a structured example: develop representative test vehicles, verify assembly quality, expose them to relevant stresses and use failure-mechanism-based modeling to interpret results.

The practical takeaway is to treat package architecture and reliability evidence as connected decisions. Fine-pitch flip chip, organic substrates and 2.5D interposers can support increasingly integrated space electronics, but suitability must be established for the specific design and use conditions through testing and appropriately bounded analysis.

Access Official Technical PDF

About The Author