Solar car engineering brings together energy conversion, electrical circuits and mechanical design in a compact, testable system. A classroom challenge developed by Clark Public Utilities illustrates how teams can work through those disciplines using a photovoltaic (PV) module, a DC motor, gears, axles and wheels. The project is educational, but its methods—define constraints, build a prototype, measure performance and iterate—also reflect the structured problem-solving used in industrial engineering.
The value is not limited to producing a car that moves. Teams must understand how components interact, identify why a design behaves as it does and communicate the evidence behind their decisions. That makes the challenge a useful example of engineering practice as a complete process rather than a one-time build.
Solar car engineering begins with constraints
A design challenge is easier to approach when the operating conditions and requirements are clear. In the Clark Public Utilities event, cars run on a 20-foot gym-floor track with lanes 12 inches wide. The lighting reaches only the first 24 inches of track, using three halogen lamps positioned above the start. The indoor format also uses batteries for supplemental power, alongside the solar module.
These conditions shape the engineering problem. The team must account for the available light, track surface, lane boundaries and the components permitted by the rules. The kit specifications vary by school level, so teams need to check the applicable judging guide rather than assume that every class uses identical parts. The general kit includes a PV module, DC motor, battery holder and batteries, axles, wheels and gears; some levels also use LEDs, while the high school kit includes a resistor and a different motor.
This is a familiar engineering principle: requirements are not administrative details to consider after the design is complete. They define the system’s boundary conditions and influence which solutions are practical.
Understand the photovoltaic circuit before building
A PV module converts light into electrical energy. In a closed circuit, the voltage it produces can drive current through a connected load, such as a motor or LED. The module’s output depends on the light reaching its surface, so its position and angle matter. When light strikes a surface less directly, the irradiance absorbed by that surface decreases.
Before assembling a complete vehicle, teams can investigate how circuit connections affect operation. A motor that does not turn or an LED that stays dark may point to different problems: incorrect polarity, a broken or loose connection, a short circuit, or a component connected in the wrong direction. LEDs are polarized, so current must pass through them in the correct direction.
Adding a battery to a circuit that also includes a PV module gives students an opportunity to compare how the system behaves with supplemental power. In the challenge, batteries are part of the indoor format; they should not be treated as a substitute for understanding the circuit. Careful drawings and notes about each configuration help teams identify what changed and what the result suggests.
Gear ratios create a speed-and-torque trade-off
The motor’s output must be transferred to the axle and wheels. Gears provide one way to change that relationship. The gear attached to the motor is the drive gear; the gear attached to the axle is the driven gear. Changing their relative sizes affects how the axle turns and how much force is available at the wheel.
In the curriculum’s gear investigation, students compare combinations by recording wheel rotations over a set interval. The guide explains that increasing the drive gear’s size relative to the driven gear requires more force to turn the larger gear and can reduce speed. Conversely, a smaller drive gear relative to the driven gear can reduce torque and support greater speed under the described conditions. The best choice depends on the vehicle design, so a gear combination should be tested rather than selected by intuition alone.
For a meaningful comparison, teams should keep the test setup consistent—for example, placing the PV module in the same position relative to the light source. Otherwise, a change in illumination could be mistaken for an effect caused by the gears.
Use controlled tests to guide redesign
Once an initial prototype is testable, the team can move from broad adjustments to evidence-based refinement. The key is to change one independent variable at a time while observing a dependent variable, such as the time needed to complete the track. Other relevant design variables may include wheel size, wheel grip, module angle, body dimensions or gear selection.
A practical test record can include:
- Variable changed: Identify the specific component or setting being tested.
- Controls: Record what remains unchanged so comparisons are fair.
- Prediction: State the expected effect before running the test.
- Result: Log measurements and observations for each variation.
- Next step: Explain whether the result supports another test or a design change.
Testing multiple variations helps teams distinguish a useful design improvement from an adjustment that simply coincided with a better run. If a redesign changes several features at once, it becomes harder to determine which change affected performance. A structured notebook preserves the reasoning behind each iteration, including ideas that did not work as expected.
Documentation and communication are part of performance
The challenge assigns 55% of the overall team score to documentation and interview performance, with the remaining 45% based on race performance. That scoring makes an important point: a successful engineering outcome includes both a functioning design and the ability to explain how it was developed.
Teams are encouraged to keep dated notebook entries, retain earlier ideas rather than erase them, and balance written explanations with sketches, tables and measurements. This record can support a poster and help students answer judges’ questions about design choices and test results. For technical teams more broadly, the same habit makes design decisions easier to review and communicate across roles.
Apply the process, not just the build
The practical lesson from solar car engineering is that performance emerges from the interaction of electrical, mechanical and environmental factors. A PV module’s exposure, circuit integrity, gear selection and wheel behavior all contribute to how the vehicle operates. No single adjustment guarantees improvement; the design must be tested under consistent conditions and refined using observed results.
For educators and technical decision-makers alike, the challenge demonstrates a repeatable approach: clarify constraints, understand the system, build a testable prototype, measure its behavior and document each iteration. That disciplined process turns a small solar vehicle into a clear example of engineering design in action.